Sharp Xg E3000u Projector User Manual

E-11
Using the Image Invert/Reverse Function
nThis projector is equipped with an image invert/reverse function. The projected image can be
inverted or reversed by using the MENU button and the ADJUSTMENT 
/ and / buttons.
1 1. Press the MENU button.
With the MENU screen displayed, press the ADJUST-
MENT 
/ buttons to select ÒIMAGE ADJÓ. Then press the
ENTER button to display the IMAGE ADJ. screen.
·The last MENU screen selected is indicated for about
30 seconds.BLK SCRN DISP IMAGE  ADJ.
REVERSE
INVERT...

E-12
How to set up the projector and screen
Cautions: When setting up the projector
·For minimal servicing and to maintain high image quality, SHARP recommends that this projector be installed in
an area free from humidity, dust and cigarette smoke. When the projector is subjected to these environments,
the lens and filter must be cleaned more often. Periodically the filter should be replaced and the projector should
be cleaned internally. As long as the projector is properly maintained in this manner,...

E-13
ON/OFF
POWER
LAMP
TEMP.
Inverted Labeling for Ceiling Mount
¥ When ceiling mounting the projector, attach the supplied inverted label as shown.
ON/OFF
POWER
LAMP
TEMP.ON/OFFPOWER LAMP TEMP.
á
Front
Example of a ceiling-mount setup
Before mounting the projector, be sure to contact your nearest Authorized Sharp Industrial LCD Products Dealer to
obtain the manufacturer recommended ceiling mount bracket (sold separately). (AN-XGCM20 Ceiling Mount
Bracket, AN-EP101AP Extension Tube).
¥ If the relative...

E-14
Adjusting the Height of the Picture
nWhen adjustments for the projector position cannot be made using the Lens Shift alone, or when the projector
stand is on an angle, use the adjuster release to adjust the vertical angle of the projector. Minor adjustments can
be made with the adjusters.
Transporting the Projector
Use the carrying handle when carrying the projector.
When transporting the projector, carry it by the handle located on the side
of the unit.
Note:
¥ Always put on the lens cap to prevent...

E-15
FILTERRG B HLR
VON
OFFDC5V OUTPUT
MAX CURRENT 1A
COMPUTER
AUDIO IN AUDIO OUTPUT OUTPUT
INPUT2 INPUT1RGB COMPUTERWIRED
REMOTE FOR PC98 MOUSE  PC CONTROL
S-VIDEO
LR
LRAUDIO VIDEO
IN
1
IN
2
OUT
Connecting the Projector (VIDEO 1, VIDEO 2)
nTo watch video playback with the projector connected to audio/video output equipment, such
as a VCR, or Laser Disc Player or DVD Player or to view on a separate monitor, make the
following connections.
¥ Always turn off the LCD Projector while connecting to video...

E-16
FILTERRG B HLR
VON
OFFDC5V OUTPUT
MAX CURRENT 1A
COMPUTER
AUDIO IN AUDIO OUTPUT OUTPUT
INPUT2 INPUT1RGB COMPUTERWIRED
REMOTE FOR PC98 MOUSE  PC CONTROL
S-VIDEO
LR
LRAUDIO VIDEO
IN
1
IN
2
OUT
Connecting the Projector (RGB 1, 2: Computer)
·Please carefully read the manual of the computer you will be connecting.
·Before connecting, be sure to turn both the projector and the computer off. After making
all connections, turn the projector on first. The computer should always be turned on last.
To display...

E-17
ANALOG RGB OUT
OUTPUT INPUT1
RGB COMPUTER
Connecting to the Computer RGB Input (RGB 1)/Output (RGB 1, 2) Terminals
nYou can connect your projector to a computer for easy projection of full-color computer images, and an external
monitor for simultaneous viewing.
nUse the RGB 1 input connector and the supplied RGB cable for Plug & Play.
RGB Signal
Cable
(Supplied)
RGB Signal
Output Socket
11. Connecting to an IBM-PC (VGA, SVGA,
XGA, SXGA) Series computer Ð 1,280 ´
1,024 maximum resolution
Plug the RGB...

E-18
3. Connecting to other compatible
computers
When connecting the projector to a compatible computer
other than an IBM-PC (VGA/SVGA/XGA/SXGA) or
Macintosh series, a separate cable is needed. Please
contact your dealer for ordering information.
Notes:
·Connecting computers other than the recommended types may result
in damage to the projector, the computer, or both.
·Connect the audio from the computer to the COMPUTER AUDIO
INPUT terminal.
4. Connecting to the COMPUTER AUDIO
INPUT
·The COMPUTER AUDIO...

E-19
Connecting the Projector (RGB 2)
Connecting to the Computer RGB 2 Input Terminals
nPrevents a deterioration of picture quality to enable 5 BNC computer input.
¥ Before connecting, be sure to turn both the projector and the equipment off.
¥ Connect the R, G, B, H-SYNC and V-SYNC cables to the correct input terminals on the projector and an RGB
switcher (sold separately) connected to the computer, or connect a 5 BNC-VGA cable (sold separately) directly
from the input terminals on the projector to the...

E-20
Input Signals (Recommended Timing)
For IBM and compatibles
Input signals: The video output signal timing of different
types of video signals are shown below
for reference.
VIDEO SIGNALVIDEO SIGNAL
C-SYNC (H)
VIDEO SIGNAL
C-SYNC (V)
V-SYNC
a
bc
d
w
x
z
a
bc
d e
e = 2 dot
w
xy
z
y VIDEO SIGNAL
HORIZONTAL
SYNC SIGNAL
VERTICAL
SYNC SIGNAL
For Apple Macintosh Series
E D O MM B IMB IMB IMB IMB IMB IMB IMB IMB Iel p p Ael p p Ael p p A
A G VAS E VAG V SAG V SAG V SAG V SAG XAG XAG Xh s o t n i c a M
M TI...