Sharp Xg E3000u Projector User Manual

E-1
Dear SHARP Customer
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color
LCD Projector built for outstanding quality, reliability and performance.
Every SHARP Color LCD Projector is adjusted for a proper picture and has passed through the
most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you have the ability to adjust the picture and color to your personal viewing preference.
We sincerely hope that you will be...

E-2
WARNING:FCC Regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the userÕs authority to operate this equipment.
INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This...

E-3
14) Lightning Ð For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent
damage to the product due to lightning and power-line surges.
15) Overloading Ð Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
16) Object and Liquid Entry Ð Never push objects of any...

E-4
Notes on Operation
About the Temperature Monitor Function:
¥ If the projector starts to overheat due to set-up problems or a dirty air filter, ÒTEMP.Ó will flash in
the upper-left corner of the picture. If the temperature continues to rise, then the lamp will turn
off, the TEMPERATURE WARNING indicator will flash, and after a 90-second cooling-off
period the power will shut off. Refer to page 32, ÒMaintenance Indicators,Ó when the ÒTEMP.Ó
warning appears in the picture.
About the Lamp Monitor...

E-5
ON
S-VIDEO
LR
LR
FILTERRG B HLR
VON
OFFOFF
DC5V OUTPUT
MAX CURRENT 1A
COMPUTER
AUDIO IN AUDIO OUTPUT OUTPUT
INPUT2 INPUT1RGB COMPUTERWIRED
REMOTE FOR PC98 MOUSE  PC CONTROL AUDIO VIDEO
IN
1
IN
2
OUT
A.C. 120V
C.A. 120V 
WIRED REMOTE
CONTROL INPUT
(3.5 mm Mono Minijack)
DC 5V 1A OUTPUT
Filter ON/OFF
switch
COMPOSITE VIDEO OUTPUT: BNC
MOUSE TERMINAL
Use when operating your personal computer with the
wireless mouse remote control.
Left Terminal: D-sub 9-pin (for IBM/Mac)
Right Terminal: 9-pin mini DIN...

E-6
ONMUTE
MN LN
BLACK SCREEN/    LENSB
R-CLICK/ENTER
INPUT SELECT
DATA1
CHECK
MOUSE
LIGHT
LCD PROJECTORADJ. DATA2
VIDEO1 VIDEO2
LASER/
           MENU
VOL
OFF
Operating the Wireless Mouse Remote Control
The functions of your personal computerÕs mouse have been built into the remote control
enabling you to operate your projector and personal computer with only the remote con-
trol.
1. Slide the MAIN POWER switch on the side of the unit on.
2. Press the POWER ON button on the front panel of the remote...

E-7
Using the optional cable with the remote control
·When the remote control cannot be used due to the
range or positioning of the projector (rear projection,
etc.), connect the optional cable from the Wired
Remote Control Input jack on the remote control to
the Wired Remote Input on the side of the projector.
Note:
·The signal transmitter does not function when the optional
cable is connected to the remote control.
Inserting the Batteries
Remove the battery cover as shown and insert four AA
size...

E-8
ON
S-VIDEO
LR
LR
FILTERRG B HLR
VON
OFFOFFDC5V OUTPUT
MAX CURRENT 1A
COMPUTER
AUDIO IN AUDIO OUTPUT OUTPUT
INPUT2 INPUT1RGB COMPUTERWIRED
REMOTE FOR PC98 MOUSE  PC CONTROL AUDIO VIDEOIN
1
IN
2
OUT
A.C. 120V
C.A. 120V 
MENU ENTER LENS MUTE VOLUMEINPUT
SELECT BLACK
SCREENMN LN B
INADJ.EN
Wireless Mouse Functions
mThe wireless mouse functions and laser pointer on the remote control can help you create a more
professional presentation.
¥ By attaching the provided mouse cable to both the mouse terminal on...

E-9
Setting Up the Projector
Using the Focus, Zoom and Lens Shift
·Lens Shift, Zoom, Focus and Reversed/Inverted Image mode functions broaden your options
for projector placement.
·See pages 10, 12 and 13 for details on projector setup.
SIDE VIEW
Lens Shift
Zoom
Ceiling setting
Invert Image
Table setting
Zoom
3. Press the LENS button.
·
When using the remote control to adjust the picture,
move the MOUSE/ADJUSTMENT sliding switch to the
ADJUSTMENT position. When the LENS button on the
remote control or on...

E-10
90°
90°
Projector Distance and Picture Size Relationship
mThe motorized zoom lens allows adjustment to the image size within the projectorÕs range.
mThe picture can be focused from a minimum of approximately 4.5 ft (1.4 m) to a maximum of 96.3 ft (29.4 m)
from the screen. Please set up the projector within this range.
Distance from screen
Picture size: 100 inches (254 cm)
¥ Above is an illustration of maximum and minimum projection distances for the XG-E3000U with a picture size of 100 inches
(254...