Sharp Xg C55x Projector User Manual

Easy to Use Functions
-57
Displaying Dual Pictures (Pict in Pict)
Picture in Picture function allows you to display two pictures on the sa\
me screen. You can
display the image input from INPUT 3 or 4 as an inset picture overlappin\
g the main picture
from INPUT 1 or 2.
Displaying the Inset Picture
1Press .
2Press  or  on the remote
control or 
 on the projector
to switch the image in the in-
set picture .
3Press  '
' '
'
' , 
"
" "
"
" , 
\
\ \
\
\  and 
|
| |
|
|...

58
Black Screen Function
-58
BLACK SCREEN
button
" Projected Image
This function can be used to display a black screen.
Blacking out the Pro-
jected Image
1Press .
•The screen turns black and  “BLACK
SCREEN ” is displayed on the screen.
2To return to the original
projected image, press 
again. 

Easy to Use Functions
-59
Displaying the Break Timer
"On-screen Display
Displaying and Setting
the Break Timer
1Press . The break timer
starts to count down from 5
minutes.
2When “” is displayed, press
'
' '
'
'  , 
"
" "
"
"  , 
\
\ \
\
\  or 
|
| |
|
|   to set the break
timer.
• You can set anywhere between 1 and
60 minutes (in 1 minute units).
• The break timer starts to count down
as soon as  ' , "  , \  or  | is pressed.
3Press  to cancel the...

-60
Color Management System (C. M. S.)
Selecting the Color
Reproduction Mode
Select “Color Selected” in the “C.M.S.”
menu on the menu screen.
➝ For operating the menu screen, see
pages  42 to 45 .
Note
•For additional information about sRGB
function, visit “http://www.srgb.com/”.
•“sRGB” cannot be selected for “Color Se-
lected” on the C.M.S. menu when “Com-
ponent” is selected for “Signal Type” on
the “Picture” menu.
• When “sRGB” is selected;
• The gamma correction cannot be set.
• “Red”, “Blue” or...

Easy to Use Functions
-61
Setting the Brightness
of the Target Color
Select “Lightness ” in the  “C.M.S. ”
menu on the menu screen.
➝  For operating the menu screen, see
pages  42 to 45 .
Setting the Chromatic
Value of the Target
Color
Select “Chroma ” in the  “C.M.S. ” menu
on the menu screen.
➝  For operating the menu screen, see
pages  42 to 45 .
Setting the Hue of the
Target Color
Select “Hue ” in the  “C.M.S. ” menu on
the menu screen.
➝  For operating the menu screen, see
pages  42 to 45 . 

-62-62
Color Management System (C.M.S.)
Resetting User-Defined
Color Settings
Select “Reset (This Color) ” or  “Reset
(All Colors) ” in the  “C.M.S. ” menu on
the menu screen.
➝  For operating the menu screen, see
pages  42 to 45 .
Overview of All Color
Settings
Select “View Settings ” in the  “C.M.S. ”
menu on the menu screen.
➝  For operating the menu screen, see
pages  42 to 45 .
Description
“ Lightness ”,  “Chroma ” and  “Hue ” of the
color selected for  “Target ” are reset.
“ Lightness ”,  “Chroma ”...

Easy to Use Functions
-63
Setting the Audio Out-
put Type
Select “Audio Out ” in the  “Options (1) ”
menu on the menu screen.
➝  For operating the menu screen, see
pages  42 to 45 .
Setting on/off the Inter-
nal Speaker
Select “Speaker ” in the  “Options (1) ”
menu on the menu screen.
➝  For operating the menu screen, see
pages  42 to 45 .
Setting on/off the Internal Speaker
This function allows you to set on/off the internal speaker.
Setting the Audio Output Type
Selected Item
FA O
(Fixed audio output)...

-64
Auto Search Function
This function automatically searches for and switches to the input mode \
in which signals
are being received, when the projector is turned on, or when the INPUT b\
utton is pressed.
-64
Using Auto Search
Select “Auto Search ” in the  “Options
(1) ” menu on the menu screen.
➝  For operating the menu screen, see
pages  42 to 45 .
Note
• ON
Automatically switches to the input mode
in which signals are being received, when
turning on the projector or pressing 
 on
the projector.
•...

Easy to Use Functions
-65
Video Digital Noise Reduction (DNR) System
Reducing Image Noise
Select “DNR ” in the  “Options (1) ” menu
on the menu screen.
➝  For operating the menu screen, see
pages  42 to 45 .
Note
•Set a level so as to view a clearer picture.
Make sure to set DNR to  “OFF ” in the fol-
lowing cases:
• When the image is blurry.
• When the contours and colors of moving
images drag.
• When TV broadcasts with weak signals
are projected.
Info
•This function is available with INPUT 1, 2
(480
I,...

-66
Setting the Video System
Setting the Video
System
Select “Video System ” in the  “Options
(1) ” menu on the menu screen.
➝  For operating the menu screen, see
pages  42 to 45 .
Note
•The video signal can only be set in IN-
PUT 3 or INPUT 4 mode.
• In  “Auto ”, images are displayed in PAL
even if PAL-N or PAL-M input signals are
received.
When connected to PAL video equipment.
When connected to SECAM videoequipment.
When reproducing NTSC signals in
PAL video equipment.
When connected to NTSC video...