Sharp Xg C55x Projector User Manual

Connections and Setup
-17
Connecting the Power
Cord
Plug in the supplied power cord into
the AC socket on the rear of the pro-
jector.
Power codeSupplied
accessory
Connecting the Projector to a Computer
Connecting to a Computer
Using the RGB Cable
1Connect the projector to the
computer using the supplied
RGB cable.
•Secure the connectors by tightening
the thumbscrews.
2To input audio signal, connect
the projector to the computer
using the computer audio cable
(commercially available or avail-
able as...

-18
Connecting the thumbscrew cables

Connect the thumbscrew cable making sure that it
fits correctly into the terminal. Then, firmly secure
the connectors by tightening the screws on both
sides of the plug.

 Do not remove the ferrite core attached to the RGB
cable.
Ferrite core
Connecting the Projector to Other Devices
“Plug and Play” function (when connecting to a 15-pin terminal)

This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC
compatible computer will...

Connections and Setup
-19
Connecting to Video Equipment
1S-video cable (commercially available)
Connecting to Video
Equipment Using an
S-video, a Composite
Video or an Audio Cable
Using an S-video, video, or audio cable, a VCR,
laser disc player or other audio-visual equip-
ment can be connected to INPUT 3, INPUT 4
and AUDIO (L/R) input terminals.
1Connect the projector to the
video equipment using an S-
video cable or a composite
video cable (both commercially
available).
2Connect the projector to the...

Optional
cable3RCA to 15-pin D-sub cable
AN-C3CP
(910 (3.0 m))
To analog component
output terminal
To audio output terminal
2ø3.5 mm stereo minijack to RCA audio cable
(commercially available)
13 RCA to 15-pin
D-sub cable (sold separately)
DVD player or
DTV* decoder
Connecting to
Component Video
Equipment
Use a 3 RCA to 15-pin D-sub cable when con-
necting to the INPUT 1 or 2 terminal, compo-
nent video equipment such as DVD players
and DTV* decoders.
*DTV is the umbrella term used to describe
the new...

Connections and Setup
-21
Connecting to an Amplifier
Connecting to an
Amplifier or Other Audio
Components
Using a ø3.5 mm stereo minijack to RCA au-
dio cable, an amplifier or other audio compo-
nents can be connected to the AUDIO OUT-
PUT terminal.
Connect the projector to the amplifier
using a  ø3.5 mm 
stereo minijack to
RCA 
audio cable (commercially
available).
Info
• By using external audio components, the
volume can be amplified for better sound.
• The AUDIO OUTPUT terminal allows you
to output...

Connecting to a
Computer Using a DIN-
D-sub RS-232C Adaptor
and an RS-232C Serial
Control Cable
When the RS-232C terminal on the projector
is connected to a computer with a DIN-D-sub
RS-232C adaptor and an RS-232C serial con-
trol cable (cross type, sold separately), the
computer can be used to control the projec-
tor and check the status of the projector. See
page 89 for details.
1Connect the supplied DIN-D-
sub RS-232C adaptor to an RS-
232C serial control cable (sold
separately).
2Use the above cables...

Connections and Setup
-23
Optional
cableComputer RGB cable
AN-C10BM
(3210 (10.0 m))
Connecting to a Monitor
Watching Images on
Both the Projector and
a Monitor
You can display computer images on both the
projector and a separate monitor using two
sets of an RGB cable. An RGB cable is sup-
plied with this projector. You need to buy an-
other RGB cable for connecting the projector
to a monitor.
1Connect the projector to the
computer and monitor using
RGB cables (one is supplied,
the other is sold...

-24
Using the Wireless Presentation Function of the
Remote Control
By connecting the remote receiver to a computer, wireless presentation control is possible.
BACK and FORWARD buttons on the remote control will emulate the [Page Up] and [Page
Down] keys on your computer keyboard. This will allow you to remotely na\
vigate applicable
presentation programs such as Microsoft PowerPoint
®.
Using the Wireless Pre-
sentation Function
1Connect the remote receiver to
the computer using the sup-
plied USB cable....

Connections and Setup
-25
Up
Down
Setup
Using the Adjustment
Feet
The height of the projector can be adjusted
using the adjustment feet at the front and back
of the projector when the surface the projec-
tor is placed on is uneven or when the screen
is slanted.
The projection of the image can be made
higher by adjusting the projector when it is in
a location lower than the screen.
1Press HEIGHT ADJUST.
2Lift the projector to adjust its
height and remove your finger
from HEIGHT ADJUST.
3Rotate the...

Zoom in
Zoom out
Zoom knob
Focus ringAdjusting the Lens
The image is focused and adjusted to the
desired size using the focus ring or zoom
knob on the projector.
1The focus is adjusted by rotat-
ing the focus ring.
2Zooming is adjusted by mov-
ing the zoom knob.
-26
Setup