Sharp Tl M5200 Operation Manual

29
Operation

Using the remote control as the wireless computer mouse
The USB remote receiver (optional, AN-MR) makes it possible to operate the monitor with the remote 
control. For details, see the operation manual of the receiver.
USB remote receiver (optional, AN-MR2)To Monitor
RGB, DVI or HDMI cable(commercially available)
To USB terminalTo PC
Computer
The mouse pointer can be operated in the following way after it is connected.
When moving the cursor:
Press Adjustment/MOUSE (▲/▼/◄/►).
When...

30
• You need to bring up the On-Screen Display to 
perform settings for the monitor. The On-Screen 
Display for the settings is called “Menu”.
•  The Menu enables various settings and 
adjustments. (See page 31.)
•  The Menu can be operated with the remote 
control.
Basic menu operations
RETURN button
Adjustment/ MOUSE 
buttons
MENU button
ENTER button
1 Press MENU and the MENU screen appears.
MENU [Picture]
Picture Audio Power Control Setup Option 
Contrast 
OPC [Off] 
AV Mode [Standard]
Brightness...

31
Operation
List of menu items
Menu operations
Picture
AV Mode  ......................................................Page 32OPC   .............................................................Page 32Backlight   ......................................................Page 32Contrast   .......................................................Page 32Brightness   ....................................................Page 32Color   ............................................................Page 32Tint...

32

Picture menu
MENU [Picture]
Picture Audio Power Control Setup Option 
Contrast 
OPC [Off] 
AV Mode [Standard]
Brightness 
Color
Tint 
Sharpness 
Advanced 
Reset 
[  30] 
[    0] 
[    0] 
[    0] 
[    0] 
Red [    0] 
Green [    0] 
Blue [    0] 
Backlight [+6] 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
n Selecting a preset AV Mode
The AV Mode function enables you to select 
appropriate settings for picture and audio to account 
for the system environment which can vary due to 
factors like room brightness or the...

33
Operation

OPC (Optical Picture Control) setting
You can set the monitor to automatically adjust the 
screen to suitable backlight brightness according to 
the lighting conditions.
OPC indicator
Selectable itemsDescription
On(Display)Displays the OPC effect on 
the screen while adjusting the 
brightness of the screen.
OnAutomatically adjusts
OffThe brightness is  fixed at the value 
set in “Backlight”. (See page 32.)
OPC indicator
Light off“Off ” is selected in the OPC 
setting.
Lighted (Green)“On”...

34

Audio menu
Audio 
Treble 
Bass 
Balance 
Reset 
[  0] 
[  0] 
- 
L
+ 
[  0] - + 
R 
Standard
Power Control 
n Audio adjustment
You can adjust the audio of the selected AV mode.
Selectable items◄button ►button
TrebleFor weaker trebleFor stronger treble
BassFor weaker bassFor stronger bass
BalanceDecrease audio 
from the right 
speaker
Decrease audio 
from the left 
speaker
•	For	resetting	all	adjustment	items	to	the	factory	preset	values,	press	▲/▼ 	to	select	“Reset”,	press	ENTER ,	
press	▲/▼ 	to...

35
Operation

n  
Ecology
When set to “Yes”, The monitor activates the 
following power saving mode.
•  “OPC” set to “On” (Page 
33)
•  “Standby Mode” set to “Mode” (Page 
38)
•  “No Operation Off ” set to “3 Hours” (Page 
34)
•  “Power Management” set to “Mode
” (Page 34)
•	Ecology	mode	cannot	be	deactivated	by	selecting	“No”.	
Each	setting	must	be	changed	individually	to	deactivate	
Ecology	mode.
N o t e
Setup menu
SetupOption
Set Inputs
Input Label
Position
Password
Keylock
Fine Sync
DHCP...

36

Changing the password
1 Select “Password”, then press ENTER.
•  The screen for entering the password appears.
2 Enter the password in “Old Password” using  ▲/▼/◄/►, then press ENTER.
3 Enter the password in “New Password” using  ▲/▼/◄/►, then press ENTER.
4 Enter the same password again in “Reconfirm” using ▲/▼/◄/►, then press ENTER.
•	If 	you 	do 	not 	need 	the 	password 	protection 	for 	the 	“Setup”	
menu	settings	anymore,	press	ENTER 	without	entering	
new	password	in	steps	3	and	4.
•	To	cancel...

37
Operation

n  
Labelling input sources 
(Input Label)
You can assign each input source a label as you 
prefer.
1  Press COMPUTER (1/2), DVI, HDMI, S-VIDEO or VIDEO to select the desired input source.
2 Press MENU and the MENU screen appears.
3 Press ◄/► to select “Setup”.
4 Press ▲/▼ to select “Input Label”, and then press ENTER.
•  When an HDMI input terminal is selected, a 
Menu screen for selecting “Auto” or “Manual” is 
displayed.
•  When you select “Auto” using 
▲/▼, the Menu 
screen returns to...

38

Adjusting the computer image manually
Ordinarily you can easily adjust the picture as 
necessary to change image position using “Auto 
Sync”. In some cases, however, manual adjustment 
is needed to optimize the image.
Selectable itemsDescription
H-PositionCenters the image by moving it to the 
left or right.
V-PositionCenters the image by moving it up or 
down.
ClockAdjusts when the image flickers with 
vertical stripes.
PhaseAdjusts when characters have low 
contrast or when the image flickers.
•...