Sharp Tl M5200 Operation Manual

9
Introduction

Accessories
n Supplied accessories
If any component should be missing, please contact your dealer.
 Liquid Crystal Display: 
 
Power cord (Approx. 6 feet [.8 m]): 
  
 
R-6 battery (“AA” size, UM/SUM-3, HP-7 or similar): 
 
  
CD-ROM: 
  
 
Operation manual: 
  
 Remote control:   Setup stand:   Cable clamp:   Power cord clamp: 
     <
LHLDWA73WJKZ> 
*  For environmental protection!
  Do not dispose of batteries in household...

0
Part Names
Front view
LCD panel
POWER indicator (See page 23.)
TIMER indicator (See page 43.)
OPC indicator (See page 33.)
OPC sensor (See page 33.)
Remote control sensor (See page 22.)
Rear view
LAN  terminal  (See page 20.)
RS-232C terminal  (See page 20.)
HDMI  terminal  (See page 17.)
DVI IN  terminals  (See pages  16, 17 and 18.)
AC input terminal (See page 21.)
COMPUTER IN 1 terminals (See pages 16, 17 and 18.)COMPUTER IN 2 terminals (See pages 16, 17 and 18.)MONITOR OUT terminals (See page...


Introduction
Part Names
Side view
POWER buttonFor turning the main power on. (See page 23.)
MENU buttonFor displaying adjustment and setting screens. (See page 30.)
ENTER button For setting items selected or adjusted on the menu. (See page 30.)
INPUT buttons ( / ) For selecting the input mode. (See page 24.)
VOL (Volume) buttons (+/–) For adjusting the speaker sound level. (See page 24.)
Adjustment buttons (▲/▼/◄/►) For selecting and adjusting menu items. (See page 30.)
S-VIDEO IN terminal...


Remote control
ON button For turning the power on.(See page 23.)
COMPUTER 1, COMPUTER 2, DVI, HDMI, S-VIDEO, VIDEO buttons For switching to the respective input modes.(See page 24.)
AV MUTE button For temporarily displaying a black 
screen and turning off the sound.(See page 24.)
VOL (Volume) buttons (+/–) For adjusting the speaker sound level.(See page 24.)
MENU button For displaying adjustment and setting screens.(See page 30.)
ENTER button For setting items selected or adjusted on the...

3
Preparation
How to Install the Monitor
Mounting precautions
• Mounting the monitor on the wall requires special expertise and the work must be performed by an 
authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company 
will bear no responsibility for accidents or injuries caused by improper mounting or mishandling.
•  This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary 
for some materials such as...

4

How to Install the Monitor
56
Insert and tighten the screws into the 4 holes on 
the rear of the monitor.
Insert the stand into the openings on the 
underside of the monitor.
•	To	detach	the	stand,	perform	the	steps	in	reverse	order.
•	Store	the	protective	covers.	You	will	need	them	after	detaching	the	stand.
N o t e
Mounting the monitor on the wall
n Handling and precautions with the wall-mounted monitor
• You can mount the monitor on the wall using the optional AN-5AG4 bracket.
•  For...

5
Preparation

n Mounting the monitor on the wall
Attach the monitor to the wall-mount brackets according to the procedure below.
12
Use the protective cover to prevent dust from 
entering the underside of monitor where the stand 
has been detached.
3
6
Unfasten the 4 screws used to secure the stand in 
place.
Connect and bind the power cord and terminal 
cables.
Detach the 4 caps at the 4 locations on the rear of 
the monitor.
Attach the wall-mount brackets (L/R).
5
4
Set the monitor on the wall....

6
Connecting Peripheral Equipment
Caution
• Be sure to turn off the power and disconnect the plug from the power outlet before connecting/
disconnecting cables. Also, read the manual of the equipment to be connected.
•  Be careful not to mix up the input terminal with the output terminal when connecting cables. Mixing up the 
input and output terminals may cause malfunctions and other problems.
•  After making all connections, turn on the monitor and then the other pieces of equipment. When...

7
Preparation
EquipmentTerminal on connected equipmentCable (commercially available)Terminal on the monitor
Video equipmentDVI digital output terminalDVI Digital cableDVI IN
DVI-D(HDCP)
Component video output terminal3 RCA to mini D-sub 15 pin cable COMPUTER IN 1
S-video output terminalS-video cableS-VIDEO IN
Video output terminalVideo cableVIDEO IN
HDMI output terminalHDMI cable HDMI
RGB output terminal5 RCA RGB cable  BNC to RCA adaptorsCOMPUTER IN 2
Component  video output terminal
BNC to RCA...

8

EquipmentTerminal on connected equipmentCable (commercially available)Terminal on the monitor
Camera/Video gameComponent  video output terminal
Cables for a camera or a video game/ 3 RCA to mini D-sub 15 pin cable
RCA adaptor plug
COMPUTER IN 1
S-video output terminalCables for a camera or a video gameS-VIDEO IN
Video output terminalCables for a camera or a video gameVIDEO IN
Audio equipmentø3.5 mm audio output terminalø3.5 mm stereo or mono audio cableAUDIO (for DVI IN)
    AUDIO
AUDIO(for...