Sharp Sl 5500 Operation Manual

106Settings
• The approximate time of file transfer is one minute per 100 Kbyte file.
Receiving data in Automatic receive mode
The Automatic receive mode notifies you of the data, even if you are in another 
application.
1.Tap the Automatic radio button on the Beam Receive screen.
2.Perform step 3 to 5 above of “Receiving data in Manual mode” to start data 
transfer.
Note:
If the unit receives the data, which has the same category but belong to 
the different application, from the sending unit, the...

Settings107
Using the Application Key
The Application Key application allows you to assign the following four keys on the 
slide cover to any of the applications installed in the unit: Calendar key, Address 
Book key, Menu Popup key, EMail key.
Overview
Set Application Key screen
1.
In the Settings folder of the Home screen, tap the “Application Key” application 
icon.
The Set Application Key screen appears.
2.Tap each drop-down list button to select the desired application name.
3.Tap   to save the...

108Settings
Managing power (Light & Power)
Light & Power setting allows you to manage the frontlight and auto-power off feature. 
1.In the Settings folder of the Home screen, tap the “Light & Power” application 
icon.
2.Set the following items.
For the Power saving options, tap the checkbox and then tap the up or down arrow 
button of the spinbox to set the desired time.   
Dim light after When checked, the frontlight will be dimmed if no operation is 
performed in the specified time. The frontlight will...

Settings109
3.Tap   to save the setting, or tap   to cancel.
 Adjusting the touch panel (Recalibrate)
Calibration setting allows you to calibrate the screen.
To ensure that your SL-5500 correctly matches the positions you tap on the screen 
with the screen’s contents you may occasionally need to recalibrate.
1.In the Settings folder of the Home screen, tap the “Recalibrate” application icon.
The screen will change and show a cross near the bottom left of the screen. 
2.Press the stylus in the center of...

110Settings
Overview
1.In the Settings folder of the Home screen, tap the “Security” application icon.
The Security Settings screen will be displayed.
Note:
If you have set the passcode in the initial settings after you have carried 
out a FULL reset or in this application, the passcode entry screen 
appears. 
Setting the passcode
By default, the passcode is not registered. Use the on-screen-numeric keyboard to 
enter the passcode.
1.Tap the “Set passcode” button.
2.Enter your passcode.
The passcode you...

Settings111
Changing the passcode
1.Tap the “Change passcode” button.
2.Enter your passcode and then tap “OK”.
3.Enter the new passcode and then tap “OK”.
You return to the Security Settings screen.
4.Tap   on the Security Settings screen to save the passcode.
Clearing the passcode
1.Tap the “Clear passcode” button and then tap    .
Turning the Security setting on or off
1.Tap the “Require pass code at power-on” checkbox to turn Security setting on.
2.Tap   on the Security Settings screen to save the...

112Settings
Shutting down
The Shutdown application allows you to restart the Linux system and the Qtopia 
system.
Restarting systems will erase data being edited.
Overview
1.In the Settings folder of the Home screen, tap the “Shutdown” application icon.    
Restart Qtopia button Restarts the Qtopia system.
Reboot button Resets the SL-5500.
The progress bar reaches 100% and then the Home 
screen will be displayed after approximately 20 
seconds.
Terminate Qtopia button Terminates and then launches the...

Internet Settings113
Internet Settings
Internet Wizard
By following the on-screen instructions of the Internet Wizard application, you can 
set up dial-up and LAN preferences for both the EMail and Network & Sync 
applications.
•Dial-up - PPP: for dial-up connection using a modem card (CF type) and 
ordinary telephone line;
•LAN - TCP/IP: for local area network connection using a LAN card (CF type).
Overview
1.In the Settings folder of the Home screen, tap the “Internet Wizard” application 
icon.
The...

114Internet Settings
Select Connection options
Select Connection 
drop-down list 
buttonLists all settings created for LAN/Dial-up. Tap to select 
the desired one.
Connection 
Information areaDisplays information concerning the current setting listed 
in the Select Connection drop-down list button above.
This area lists the following.
For the current LAN settings
•Connection type (LAN)
•Connection media (LAN Card, USB)
•IP address (Obtain TCP/IP Information Automatically, 
Specify TCP/IP Information)...

Internet Settings115
Creating a new LAN setting
1.On the Internet Setting Wizard screen, tap “New”.
The New Connection screen appears.  
2.Tap the “LAN” radio button for “Select the connection type”.
3.If you do not want to set up e-mail preferences now, tap the Make mail setting 
checkbox to uncheck.
4.Tap “Next”.
Fill out the following screens according to your connection type.
If necessary, tap “Back” on the following screens to modify settings on the 
previous screen. Connection type radio...