Sharp Projector Pg M15x User Manual

39
Useful Features
Checking the Input Signal (INPUT 1 (DVI) mode or (RGB) mode only)
ClockPicture
Options Fine Sync
Language
PRJ Mode
END SELECT BACK ENTERPhase
H-Pos
V-Pos
Signal InfoResolution
Hor Freq
Vert Freq1024 
 768
46.3 kHz
60 Hz 0
0
0
0
Checking the Lamp Usage Time
This function allows you to check the current input signal
information.
1Press MENU.
2Press ∂/ƒ to select “Fine Sync”, and then press
ENTER.
3Press ∂/ƒ to select “Signal Info”, and then press
ENTER.
4To exit from the GUI, press MENU....

40
Useful Features
Turning On/Off the AV Mute Message
Lamp Timer
KeystonePicture
Options Fine Sync
Language
PRJ Mode
END SELECT BACK ENTER
AV Mute Disp.
OSD Display
Auto Power Off
Background BlueON
Auto Source ON
100
0
ON
OFF
This function allows you to turn off the on-screen
message that appears during AV mute is on.
Description of AV Mute Display
1Press MENU.
2Press ∂/ƒ to select “Options”, and then press
ENTER.
3Press ∂/ƒ to select “AV Mute Disp”, and then
press ENTER.
4Press ∂/ƒ to select “ON” or...

41
Useful Features
Lamp Timer
KeystonePicture
Options Fine Sync
Language
PRJ Mode
END SELECT BACK ENTER
AV Mute Disp.
OSD Display
Auto Power Off
Background BlueON
Auto Source ON
100
0
ON
OFF
On-screen Display Override Function
This function allows you to turn off the on-screen
messages that appear during input select. Once “OSD
Display” is set to “OFF” in the GUI menu, the on-screen
messages will not appear.
Description of OSD Display
1Press MENU.
2Press ∂/ƒ to select “Options”, and then press
ENTER....

42
Useful Features
Lamp Timer
KeystonePicture
Options Fine Sync
Language
PRJ Mode
END SELECT BACK ENTER
AV Mute Disp.
OSD Display
Auto Power Off
Background BlueON
ON
Auto Source
100
0
ON
OFF
When no input signal is detected for approximately 15
minutes, the projector will automatically shut off. The
on-screen message as below will appear five minutes
before the power automatically shuts off.
Description of Automatic Power Shutoff
1Press MENU.
2Press ∂/ƒ to select “Options”, and then press
ENTER.
3Press...

43
Useful Features
This function is used to detect the input source
automatically.
Description of Auto Source
1Press MENU.
2Press ∂/ƒ to select “Options”, and then press
ENTER.
3Press ∂/ƒ to select “Auto Source”, and then
press ENTER.
4Press ∂/ƒ to select “ON” or “OFF”, and then
press ENTER.
5To exit from the GUI, press MENU.
Detecting the Input Source Automatically
(GUI) On-screen Display Projector
2,3,42,3,41,5
Remote control
Lamp Timer
KeystonePicture
Options Fine Sync
Language
PRJ Mode
END SELECT...

44
Useful Features
FrontPicture
Options Fine Sync
Language
PRJ Mode
END SELECT BACK ENTERCeiling  Front
Rear
Ceiling  Rear
This projector is equipped with a reverse/invert image
function which allows you to reverse or invert the pro-
jected image for various applications.
Description of Projected Images
Projector
(GUI) On-screen Display
Selected item
Front
CeilingFront
Rear
CeilingRearProjected image
Normal image
Inverted image
Reversed image
Reversed and inverted image
1Press MENU.
2Press ∂/ƒ  to...

45
Maintenance &
Troubleshooting
Maintenance &
Troubleshooting 

46
Maintenance &
Troubleshooting
Lamp/Maintenance Indicators
Maintenance Indicators• The warning lights on the projector indicate problems
inside the projector.
• There are two warning lights: a TEMPERATURE
WARNING indicator which warns that the projector is too
hot, and a LAMP REPLACEMENT indicator which lets
you know when to change the lamp.
• If a problem occurs, either the TEMPERATURE WARNING
indicator or the LAMP REPLACEMENT indicator will
illuminate red. After turning off the power, follow the...

47
Maintenance &
Troubleshooting
Replacing the Projection Lamp
CAUTION
•Potential hazard of glass particles if lamp ruptures. Please have Sharp Authorized Projector Dealer
or Service Center replace lamp if rupture occurs.
•Do not remove the lamp cage directly after operation of the projector. The lamp may be extremely
hot. Wait at least one hour after the power cord is disconnected to allow the surface of the lamp cage
to fully cool before removing the lamp cage.
46Remove the lamp
cage.5Insert the new...

48
Maintenance &
Troubleshooting
Replacing the Projection Lamp
1Connect the power
cord.Reset the lamp timer.
1Press KEYSTONE (+) and
KEYSTONE (–) simultaneously and
ON/OFF at the same time. Plug the power cord into the AC
socket of the projector.
Resetting the lamp timer
“LAMP 0000H” is
displayed, indicating that
the lamp timer is reset.
2
•Reset the lamp timer only after replacing the lamp.
Using the Kensington Lock
This projector has a Kensington Security Standard
connector for use with a Kensington...