Sharp Projector Pg F310x User Manual
Here you can view all the pages of manual Sharp Projector Pg F310x User Manual. The Sharp manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
57 Appendix Storing the Projector Info How to Use the Storage Case When storing the projector, attach the lens cap to the lens, and place it in the supplied storage case. 1 2Open the cover of the storage case. •Ensure the projector has cooled down sufficiently before placing it in the case. • When you place the projector into the storage case, make sure that the cooling fan has stopped. • Ensure the lens cap is attached to the lens for protection. • Place the projector into the storage case with the lens...
Page 62
58 COMPUTER/COMPONENT input and COMPUTER/COMPONENT output Terminals : mini D- sub 15 pin female connector COMPUTER Input/Output Pin No. Signal 1. Video input (red) 2. Video input (green/sync on green) 3. Video input (blue) 4. Not connected 5. Not connected 6. Earth (red) 7. Earth (green/sync on green) 8. Earth (blue) 9. Not connected 10. GND 11. Not connected 12. Bi-directional data 13. Horizontal sync signal: TTL level 14. Vertical sync signal: TTL level 15. Data clock COMPONENT...
Page 63
59 Appendix RS-232C Terminal : mini DIN 9 pin female connector RD SD SG RS CS Signal Name 8 9 6 5 21 43 7Pin No. 1. 2. 3. 4. 5. 6. 7. 8. 9. I/O Reference Not connected Connected to internal circuit Connected to internal circuit Not connected Connected to internal circuit Not connected Connected to CS in internal circuit Connected to RS in internal circuit Not connected Receive Data Send Data Signal Ground Request to Send Clear to Send Input Output RS-232C Terminal : D-sub 9 pin male connector of the...
Page 64
60 Info •When controlling the projector using RS-232C commands from a computer, wait for at least 30 seconds after the power has been turned on, and then transmit the commands. • After sending an input selection or picture adjustment command and then receiving an “OK” re- sponse code, the projector may take some time to process the command. If a second command is sent while the projector is still processing the first command, you may receive an “ERR” response code. If this happens, try resending the...
Page 65
61 Appendix Computer DVINormal Stretch Dot By Dot Full Border Area Zoom V-Stretch Normal Stretch Dot By Dot Full Border Area Zoom V-Stretch CONTROL CONTENTSPower ONStandby mode (or 30-second startup time)COMMAND PARAMETERRETURN Power Projector Condition Lamp Name Input Change Volume Keystone AV Mute Freeze Auto Sync Resize On Off Status Status Power Status Quantity Usage Time(Hour) Usage Time(Minute) Life(Percentage) Model Name Check Model Name Check Projector Name Setting 1 (First 4 characters) *1...
Page 66
62 OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or...
Page 67
63 Appendix OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or ERR OK or...
Page 68
64 CONTROL CONTENTSPower ONStandby mode (or 30-second startup time)COMMAND PARAMETERRETURN Image Shift OSD Display Video System Background Lamp Setting Auto Sync Auto Power Off Auto Restart STANDBY Mode Auto Keystone PRJ Mode Language Setup Guide System Sound Internal Speaker RGB Frequency Check Fan Mode Lamp Timer Reset *3 -96 – +96 On Off Auto PAL SECAM NTSC4.43 NTSC3.58 PAL-M PAL-N PAL-60 Logo Blue None Bright Eco + Quiet On Off On Off On Off Standard Eco On Off Reverse Invert English Deutsch...
Page 69
65 Appendix Computer Computer Compatibility Chart •Multiple signal support Horizontal Frequency: 15-110 kHz, Ve rtical Frequency: 45-85 Hz, The following is a list of modes that conform to VESA. However, this projector supports other signals that are not VESA standards. 27.0 31.5 37.5 27.0 31.5 37.9 27.0 31.5 27.0 31.5 37.9 26.2 31.5 34.7 37.9 37.5 43.3 31.4 35.1 37.9 46.6 48.1 46.9 53.7 40.3 48.4 56.5 60.0 68.7 45.0 47.7 62.7 47.6 47.8 55.0 66.2 67.5 64.0 80.0 64.0 75.0 34.9 49.7 60.2 68.7 60 70 85 60...
Page 70
66 Troubleshooting ProblemCheck •P rojector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. •The selected input mode is wrong. •Cables are incorrectly connected to the projector. •Remote control battery has run out. •External output has not been set when connecting notebook computer. •The lamp unit cover is not installed correctly. • If the connected DVI digital equipment is turned on before the “DVI-D” input mode is selected on the projector, the image...