Home > Sharp > Projector > Sharp Projector Dt 400 User Manual

Sharp Projector Dt 400 User Manual

Here you can view all the pages of manual Sharp Projector Dt 400 User Manual. The Sharp manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 61

-61
Appendix
Troubleshooting
Check
•Projector power cord is not plugged into the wall outlet.
•Power to the external connected devices is off.
•The selected input mode is wrong.
•Cables are incorrectly connected to the rear panel of the projector.
•External output has not been set when connecting notebook computer.
•“Contrast” and “Bright” are set to minimum position.
•Image adjustments are incorrectly set.
(Video Input only)
•Video input system is incorrectly set.
(INPUT 5)
•Input signal type...

Page 62

-62
Specifications
Product type
Model
Video system
Display method
DLP panel
Lens
Projection lamp
Video input signal
S-video input signal
Component input signal
(INPUT 1, 2)
Analog RGB/Digital
(INPUT 5/DIGITAL)
Horizontal resolution
Pixel clock
Vertical frequency
Horizontal frequency
Rated voltage
Input current
Rated frequency
Power consumption
Power consumption (standby)Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Supplied...

Page 63

-63
Appendix
Dimensions
Units: inches (mm)
Side ViewSide ViewTop View
Rear View
Front View
Bottom View
M4 M4
M4M4
9/64 (3.25)
11
 7/64 (282)
1/16 (1.5)
2 11/64 (55.05) 12
 7/32 (310)
1 59/64 
(48.5) 3
 33/64 (89)
13/64 (5)
2
 3/16 
(55.5)
3 15/16 (99.95)
5
 7/64 (129.5) 5 7/64 (129.5)
5/8 (15.5)9/16 (14)
4 3/16 (106.3)
8
 9/32 (210.3)
8 7/8 (225.3)
1 7/32 
(30.9) 1 5/32 
(29.1)
1
 7/32 
(30.9) 1 3/4 
(44.1)
DT400_E_P61_68.p6504.10.18, 1:26 PM 63 

Page 64

-64
Glossary
Aspect Ratio
Width and height ratio of an image. The normal
aspect ratio of a computer and video image is 4:3.
There are also wide images with an aspect ratio
of 16:9 and 21:9.
Auto Sync
Optimizes projected computer images by auto-
matically adjusting certain characteristics.
Background
Initial setting image projected when no signal is
being output.
Clock
Clock adjustment is used to adjust vertical noise
when clock level is incorrect.
CLR Temp (Color temperature)
Function that can be used to...

Page 65

-65
Appendix
Index
A
AC socket ............................................................. 27
Adjustment buttons .............................................. 38
Aspect ratio .......................................................... 35
Auto Power Off ..................................................... 50
Auto Sync ............................................................. 46
AUTO SYNC button ............................................. 46
B
Background...

Page 66

-66
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”),
when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either
repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser
for parts or labor for the period(s) set for th below.
This warranty does not...

Page 67

-67
Appendix
LIMITED WARRANTY
Consumer Electronics Products
Congratulations on your purchase!
Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for
this Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp
Dealer:
Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship. If any
such...
Start reading Sharp Projector Dt 400 User Manual

Related Manuals for Sharp Projector Dt 400 User Manual

All Sharp manuals