Sharp Projector Dt 300 User Manual

-10
Remote Control (Front View)
Part Names
Remote Control (Top View)
FREEZE button
32
31
50
52
39
3938
39
31
3131
31
35
47
35
STANDBY button
ENTER button
33KEYSTONE button
UNDO button
INPUT 1 button
INPUT 2 button
INPUT 4 button
AUTO SYNC buttonRESIZE button
PICTURE SETTING button  MENU button30ON button
ADJUSTMENT buttons 
(ƒ/∂/ß/©)
INPUT 3 button
DIGITAL INPUT button
RGB/COMP. button
Remote control signal transmitters
%5@&@Q@Q03.10.29, 2:38 PM Page 10EPCF
1BHF.BLFS
+11$ 

Introduction
-11
Operating the Remote Control

The remote control can be used to control the projector
within the ranges shown in the illustration.
Note
•The signal from the remote control can be reflected off a screen
for easy operation. However, the effective distance of the signal
may differ due to the screen material.
When using the remote control:
•Be sure not to drop, or expose to moisture or high temperature.
•The remote control may malfunction under a fluorescent lamp.
Under that circumstance,...

-12
Accessories
Power cord
QACCDA007WJPZ Remote control
RRMCGA218WJSATwo AA size batteriesVideo cable
QCNWGA001WJZZ
Operation manual
TINS-B006WJZZ Lens cap
CCAPHA004WJ01
Supplied accessories
3 RCA to 15-pin D-sub cable (910 (3.0 m)) AN-C3CP
DVI to 15-pin D-sub adaptor (7.9 (20 cm)) AN-A1DV
DVI cable (910 (3.0 m)) AN-C3DV
Note
•Some of the cables may not be available depending on the region. Please check with your nearest
Authorized SharpVision Service Center or Dealer.
Optional accessories...

Connections and Setup
Connections and Setup
%5@&@Q@Q03.10.29, 2:39 PM Page 13EPCF
1BHF.BLFS
+11$ 

-14
Connecting the Projector to Other Devices
Before Connecting
Note
•Before connecting, be sure to unplug the power cord of the projector from the AC outlet and turn off
the devices to be connected. After making all connections, turn on the projector and then the other
devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connec-
tions are made.
•Be sure to read the operation manuals of the devices to be connected before making connections.
This projector...

Connections and Setup
-15
Connecting to Video Equipment
S-video cable (commercially available)
To S-video output terminal To INPUT 3 terminal
VCR or other video equipmentConnecting to Video
Equipment Using an
S-video Cable (INPUT 3)
Using an S-video cable, a VCR, DVD player or
other video equipment can be connected to
INPUT 3 input terminal.
1Connect an S-video cable to
the projector.
2Connect the S-video cable to
the video equipment.
Note
•The INPUT 3 (S-VIDEO) terminal uses a
video signal system in...

To INPUT 4 terminal
VCR or other video equipment
To video output terminal Composite video cable
Connecting to Video
Equipment Using a
Composite Video Cable
(INPUT 4)
Using a composite video cable, a VCR, DVD
player or other video equipment can be con-
nected to INPUT 4 input terminal.
1Connect a composite video
cable to the projector.
2Connect the composite video
cable to the video equipment.
Connecting the Projector to Other Devices
-16
%5@&@Q@Q03.10.29, 2:39 PM Page 16EPCF
1BHF.BLFS
+11$ 

Setup and Connections
-17
Connecting to a DVD Player and DTV Decoder
To analog component
output terminal To INPUT 1 terminals
DVD player or
DTV decoder
Component cable
(commercially available)
Connecting to
Component Video
Equipment Using a
Component Cable
(INPUT 1)
Use a component cable when connecting  com-
ponent video equipment such as DVD players
and DTV decoders to INPUT 1 terminals.
1Connect a component cable to
the projector.
2Connect the above cable to the
component video equipment.
Note
•Make...

-18
3 RCA to 15-pin
D-sub cable
Type: AN-C3CP
(910 (3.0 m))
DVI to 15-pin
D-sub adaptor
Type: AN-A1DV
(7.9 (20 cm)) Optional
accessories
Connecting to Compo-
nent Video Equipment
Using a 3 RCA to 15-pin
D-sub Cable and the
DVI to 15-pin D-sub
Adaptor (INPUT 2)
Use a 3 RCA to 15-pin D-sub cable and the DVI
to 15-pin D-sub adaptor when connecting  com-
ponent video equipment such as DVD players
and DTV decoders to INPUT 2 terminal.
1Connect a DVI to 15-pin D-sub
adaptor to the projector.
2Connect a 3 RCA...

Setup and Connections
Optional
accessoryDVI to 15-pin D-sub adaptor
Type: AN-A1DV (7.9 (20 cm))Connecting to RGB
Video Equipment Using
the DVI to 15-pin D-sub
Adaptor and the RGB
Cable (INPUT 2)
Use the DVI to 15-pin D-sub adaptor and the
RGB cable when connecting RGB video equip-
ment such as DVD players and DTV decoders
to INPUT 2 terminal.
1Connect a DVI to 15-pin D-sub
adaptor to the projector.
2Connect the above adaptor to
an RGB cable.
3Connect the above cable to the
video equipment.
•Secure the...