Sharp PNV602 Lcd Monitor User Manual

51E51
■ MAIL (RECIPIENT) 
This	screen	allows	you	to	specify	the	recipients	of	the	e-mail	
sent periodically or when the monitor has an error.
RECIPIENT E-MAIL ADDRESSES
Specify	the	e-mail	addresses	to	send	error	notification	e-mail	
to.
CONDITION
Specify the conditions to send mails. 
When	you	check	PERIODICAL,	specify	the	date	and	time	to	
send	the	mails	in	the	PERIODICAL 	setting.
CONFIRMATION
Sends	test	e-mail.
This	allows	you	to	confirm	that	the	e-mail	settings	are	
configured	properly.
Attach the...

52E52
Controlling the Monitor with a PC (LAN)
■ SNMP
You	can	configure	settings	related	to	SNMP.
SNMP SETTING
Set whether to enable or disable SNMP.
VERSION
Set the version of the SNMP to be supported.
COMMUNITY NAME 1 to 3
Set	the	name	of	the	community	required	for	the	access.
USER 1 to 3
Set the user name, password, authentication method and 
other	options	required	for	access.
TRAP SETTING
Set whether to enable or disable the trap function.
When	this	function	is	enabled,	a	trap	will	be	sent	when	the...

53E
Troubleshooting
If you are experiencing any problem with your display, before 
calling for service, please review the following troubleshooting 
tips.
There is no picture or sound.•	 Is	the	power	cord	disconnected?	(See	page	15.)
•		 Is	the	main	power	switch	off?	(See	page	17.)
•		 Is	the	monitor	in	standby	mode 	(the	power	LED	illuminating	
in orange)?
•		 Make	sure	correct	input	mode 	is	selected.	(See	page	18.)
•		 If	 any	external	equipment	is	connected,	make	sure	the	
equipment	is	operating...

54E54
The Power LED is flashing in red and green alternately. 
When “TEMPERATURE” is displayed in the corner of the 
screen.•		 When	the	internal	temperature 	of	the	monitor	rises	
excessively, the brightness of the backlight decreases 
automatically	in	order	to	prevent	high-temperature-
related	problems.	When	this	occurs,	“TEMPERATURE”	is	
displayed	on	the	screen	and	the	Power	LED	flashes	red	
and	green	alternately.	(When	 TEMPERATURE	ALERT	is	
set	to	OSD	&	LED.	 This	varies	depending	on	the	setting.)
•...

55E
Specifications
nPN-V602 Product Specifications
Model
PN-V602
LCD	component
60"	Class	[60	inch	(152.4cm)	diagonal]	 TFT	LCD
Max. resolution   (pixels)1366	x	768
Max. colorsApprox.	16.77	M	colors
Pixel pitch0.973	mm	(H)	×	0.973	mm	(V)
Viewing	angle176°	right/left/up/down	(contrast	ratio	≥	10)
Screen active area inch (mm)52-5/8	x	29-7/16 (1328.8	x	747.1)
Computer	input	signalDigital	(DVI	1.0	standard-compliant),	 Analog	RGB	(0.7	Vp-p)	[75	
Ω]
Sync signal
Horizontal/vertical	separate	(TTL:...

56E
Specifications
n Dimensional Drawings
Note that the values shown are approximate values.
Unit: inch [mm]
52-5/8 [1335.9
]
Opening width (52-5/16 [1329.4] )
Opening height (29-7/16 [747.7])
29-11/16 [754.2]
 7-7/8 [200]
5-7/8
[149.3]
52-5/8 [1335.9]
3-5/8[92.3]
 7-7/8  [200]
7-7/8 
[200]
VESA
 holes *
3-15/16 [100] 3-15/16[100]
	 When	mounting	the	monitor,	be	sure	to	use	a	wall-mount	bracket	that	complies	with	the	VESA-compatible	mounting	method.	
SHARP 	recommends	using	M6	screws	and	tighten	the...

57E
nCompatible signal timing (PC)
VESA
Wide
US 
TEXT
Sun Screen resolution
HsyncVsyncDot frequency Digital
640 × 480
800 × 600
848 × 480
1024 × 768
1 152 × 864
*1
1280 × 768
1280 × 800
*1
1280 × 960*1
1280 × 1024*1
1360 × 768
1400 × 1050*1
1440 × 900*1
1600 × 1200*1
1680 × 1050*1
1280 × 720
1366 × 768
1920 × 1080
*1
720 × 400
1024 × 768
1 152 × 900
*1
1280 × 1024*1
1600 × 1000*1
31.5kHz
37.9kHz
37.5kHz
35.1kHz
37.9kHz
48.1kHz
46.9kHz
31.0kHz
48.4kHz
56.5kHz
60.0kHz
67.5kHz
47.8kHz
60.3kHz
49.7kHz...

58E
nCompatible signal timing (AV)
Screen resolution
FrequencyDVI-D*2HDMIComponent
1920	×	1080p*124Hz -Ye s -
50Hz Ye sYe sYe s
59.94Hz Ye sYe sYe s
60Hz Ye sYe sYe s
1920	×	1080i
*150Hz Ye sYe sYe s
59.94Hz Ye sYe sYe s
60Hz Ye sYe sYe s
1280	×	720p 50HzYe sYe sYe s
59.94Hz Ye sYe sYe s
60Hz Ye sYe sYe s
720	×	576p 50HzYe sYe sYe s
720	×	480p 59.94HzYe sYe sYe s
60Hz Ye sYe sYe s
640	×	480p(VGA) 59.94HzYe sYe s -
60Hz Ye sYe s -
720(1440)	×	576i 50Hz-Ye s Ye s
720(1440)	×	480i 59.94Hz-Ye s Ye s
60Hz -Ye...

59E
Specifications
nPC/AV DVI-D input terminal pins
(DVI-D 24 pin)
No.Function No.Function
1 TMDS	data	2- 13N.C.
2 TMDS	data	2+ 14+5V
3 TMDS	data	2/4	shield 15GND
4 N.C. 16Hot-plug	detection
5 N.C. 17TMDS	data	0-
6 DDC	clock 18TMDS	data	0+
7 DDC	data 19TMDS	data	0/5	shield
8 N.C. 20N.C.
9 TMDS	data	1- 21N.C.
10 TMDS	data	1+ 22TMDS	clock	shield
11 TMDS	data	1/3	shield 23TMDS	clock+
12 N.C. 24TMDS	clock-
nPC D-sub input terminal pins
(Mini D-sub 15 pin)
No. Function No.Function
1 Red video signal input...

PN-V602	Mu	EN11H(1)