Sharp PNV602 Lcd Monitor User Manual

21E
Remote Control Mode 
With	the	remote	control	unit	it’s	possible	to	perform	operation	
of...•	 The	primary	monitor
•	 Monitors	with	a	specified	ID	No.
•	 All	primary/secondary	monitors
It’s necessary to specify which type of operation will be 
performed in advance.
1.  If using the remote control unit, press 
MODE for approx 5 
seconds. 
If using the monitor buttons, hold both 
 and  at 
the same time on the primary.
▲▲THIS MONIT OR ONLY
REMOTE CONTROL  MODE
MODE
OK CANCEL
Operate this monitor
.
2....

22E
Menu Items
Displaying the menu screen
Video	and	audio	adjustment	and	settings	of	various	functions	
are enabled. This section describes how to use the menu 
items. See pages 23 to 27 for details of each menu items.
Caution
•	 Do	not	turn	the	main	power	switch	off	while	the	menu	items	are	being	displayed.	Doing	so	may	initialize	the	settings.
nExample of operation
(Adjusting	CONTRAST
	in	the	PICTURE	menu)
1.  Press MENU to display the menu screen.
1366x76 8
V: 60 Hz    H: 47.7 kHz
AUTO
CLOCK
PHASE...

E23
Menu item details
The menu will differ depending on the input mode.
nSCREEN
You can move the menu screen display position each time DISPLAY is pressed.
AUTO (PC D-SUB/PC RGB)
The	CLOCK,	PHASE,	H-POS,	and	V-POS	are	automatically	
adjusted.
Pressing 
 
performs	adjustment.
Use	this	automatic	adjustment	when	you	use	the	PC	D-sub	
input	terminal	or	PC	RGB	input	terminals	to	display	a	PC	
screen	for	the	first	time	or	when	you	change	the	setting	of	
the	PC.	(See	page	30.)
CLOCK (PC D-SUB/PC RGB)
Adjusts...

E24
USER
Adjusts	each	item	when	the	WHITE	BALANCE	is	set	to	
USER.
R-CONTRAST .... Adjusts	bright-toned	red	component.
G-CONTRAST  .... Adjusts	bright-toned	green	component.
B-CONTRAST  .... Adjusts	bright-toned	blue	component.
R-OFFSET  .......... Adjusts	dark-toned	red	component.
G-OFFSET  ......... Adjusts	dark-toned	green	component.
B-OFFSET  .......... Adjusts	dark-toned	blue	component.
COPY TO USER
Copies	the	value	set	for	PRESET 	to	the	USER	setting.
Select “ON” and then press 
MENU.
GAMMA
Selects...

E25
Menu Items
BRIGHTNESS SENSOR  
(When connected to the PN-ZR01 (optional) only)
When	set	to	ON	or	ON:	DISPLAY,	the	brightness	will	
automatically change according to the lighting and 
surrounding brightness. Performs operation with the primary 
monitor.	If	set	to	ON:	DISPLAY,	the	effect	will	be	displayed	
with a 
.
If connecting to multiple monitors, the brightness of all the 
monitors will change.
The 
 will be displayed on the primary only.
When	setting	BRIGHT 	in	SCHEDULE	on	the	OPTION	menu,	
set...

E26
Menu Items
n OPTION
DATE/TIME SETTING
Set the date and time. Press 
 or  
to select the date 
and time, and p ress 
 
or  to change the numerical 
values.
Set	the	date	in	“Month/Day/Year”	order.
Set	the	time	on	a	12-hour	basis.	(Factory	default)
DATE/TIME FORMAT
Sets the date/time display format.
DATE  .................. 	 MM/DD/YYYY  
DD/MM/YYYY  
YYYY/MM/DD 
(YYYY:	 Year,	MM:	Month,	DD:	Day)
TIME  ................... 	 Select	12-	or	24-hour	time.
SCHEDULE (See page 29.)
You can turn the power...

E27
Menu Items
n MULTI
ENLARGE (See page 28.)
Sets whether or not to use the enlarge function.
ADVANCED (ENLARGE)
ENLARGE	H	/	ENLARGE	V
 .........   Sets the number of screen splits (number of 
monitors)	in	the	horizontal/vertical	direction	used	for	
the enlargement.
ENLARGE-POS  .........   Specify the split screen to be displayed when the 
enlargement function is used.
H-POS	/	V-POS  ......... 	 Adjust 	the	 horizontal/vertical	 position	of	the	 enlarged	
screen.
BEZEL ADJUST
Sets whether or not to use...

E28
nDual screen display
You	can	display	the	screens	of	the	PC	input	signal	and	
AV	
input signal simultaneously.
Set	this	function	with	“PIP 	MODES”	in	the	PIP/PbyP 	menu.
PIPMain screen 
Sub 
screenA sub screen is displayed 
inside a main screen.
PbyP
Main  
screen  Sub 
screen
A main screen and a sub 
screen are displayed in a 
line.
PbyP2
Main screen  Sub 
screen
Displays	a	main	screen	
which	measures	1024	
pixels in the longest 
direction and a sub 
screen in a line.
*	 The	currently	selected	input...

E29
nZOOM2 SPECIAL SETTING
If you connect a laptop computer with any of the following 
screen resolutions and black bands appear around the 
screen,	set	ZOOM2	SPECIAL
	SETTING	of	INPUT	SIGNAL	on	
the	OPTION	menu	to	ON	and	then	select	ZOOM2	in	the	SIZE	
setting.
This displays the area inside the black band.
Laptop computer 
resolution Corresponding	signal*1
1280x800
1280x1024,	1280x960,	1400x1050*2
1280x6001280x720
1024x600 1024x768
*1:		 This	setting	is	effective	only	when	the	screen	resolution,...

E30
nADVANCED items (AV input) (See page 23 
for additional Menu item details.)
FLESH TONE
Adjust	the	hue	control.
3D-NR
Reduce the noise of playback images on video.
Setting	a	higher	level	reduces	more	noise.	However,	it	may	
cause blurring on an image.
MPEG-NR
Reduce block noise caused by digital compression.
3D-Y/C (AV VIDEO)
Specify	whether	to	perform	3-dimension	 Y/C	separation.
If	dot	interference	or	cross-color	is	occurring	in	fast-motion	
scenes,	selecting	“OFF”	may	improve	the	image	quality....