Sharp Mxm264n User Guide

4-131
FACSIMILE
Contents
OPERATION WHEN A JOB IN THE JOB QUEUE IS 
COMPLETED
When a normal transmission job is completed, it moves to the completed jobs screen and Send OK appears in the 
status column.
Received faxes, timer transmission jobs, retry jobs, and forwarding jobs are handled in the job status screen as 
explained below.
Fax reception jobs
While a fax is being received, Receiving appears in the job queue screen.
When reception is completed, the job moves to the completed jobs screen and In...

4-132
FACSIMILE
Contents
CHECKING A RESERVED JOB OR THE JOB IN 
PROGRESS
The detailed contents of a broadcast transmission or serial polling job can be displayed. Select (touch) the key of the job 
that you wish to check and touch the [Detail] key. The job details screen will appear (see below).
The job name and progress (number of completed destinations / total destinations) appear at the top of the screen.
Touch a tab to display the information that appears on that tab. The following information...

4-133
FACSIMILE
Contents
CHECKING COMPLETED JOBS
You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on 
completed broadcast transmission jobs, received fax forwarding jobs, serial polling jobs, and jobs that used document 
filing. Touch the key of the desired job in the completed jobs screen and touch the [Detail] key. The job detail screen 
(see below) will appear.
The job name appears at the top of the job detail screen.
To view...

4-134
FACSIMILE
Contents
CANCELLING A FAX IN PROGRESS OR A 
RESERVED FAX
Follow the steps below to cancel a fax transmission that is in progress or a reserved fax job.
1
Press the [JOB STATUS] key.
2
Select the fax job that you wish to 
cancel.
(1) Touch the key of the fax job to be cancelled.
(2) Touch the [Stop/Delete] key.
3
Touch the [Yes] key.
If you do not wish to cancel the selected fax job...
Touch the [NO] key.
Printing of received faxes and forwarding jobs set using Inbound Routing Settings...

4-135
FACSIMILE
Contents
GIVING PRIORITY TO A RESERVED FAX 
JOB
When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. 
If you need to give priority to a job and send it ahead of the other jobs, follow the steps below.
1
Press the [JOB STATUS] key.
2
Select the fax job to which you wish to 
give priority.
(1) Touch the key of the desired job.
(2) Touch the [Priority] key.
The selected job moves up to the position immediately 
following the job...

4-136
FACSIMILE
Contents
CHECKING THE ACTIVITY LOG 
(Image Sending Activity Report)
IMAGE SENDING ACTIVITY REPORT
You can have the machine print a log of recent image sending activity (date, name of other party, time required, result, 
etc.). The Image Sending Activity Report contains useful information such as the types of errors that occurred.
The most recent 200 transactions are included in the report.
You can have the machine print the Image Sending Activity Report each time the number of...

4-137
FACSIMILE
Contents
INFORMATION APPEARING IN THE RESULT COLUMN
Error types and other information are printed in the result column of transaction and activity reports. When a transaction 
report or activity report is printed, check the result of the transaction in the result column and take action as needed.
Examples of messages that are printed in the result column
MessageExplanation
OKThe transaction was completed normally.
G3Communication took place in G3 mode.
ECMCommunication took place in G3...

4-138
FACSIMILE
Contents
FACSIMILE SPECIFICATIONS
*1 Transmission speed is for an A4 or 8-1/2 x 11 document with approximately 700 characters at standard resolution 
(8 x 3.85 lines/mm) sent in high speed mode (33.6 kbps (JBIG) or 14.4 kbps). This is only the time required to 
transmit the image information; the time required to send protocol signals is not included. Actual transmission times 
will vary depending on the contents of the document, the receiving machine type, and telephone line conditions....

5-1
This chapter provides detailed explanations of the procedures for using the scanner function and the Internet fax function.
USB memory mode can be used without installing a peripheral device.
To use the Internet fax function, the Internet fax expansion kit and the hard disk drive are needed.
BEFORE USING THE MACHINE AS A 
NETWORK SCANNER
NETWORK SCANNER FUNCTION . . . . . . . . . . . . .  5-3
PREPARATIONS FOR USE AS A NETWORK 
SCANNER  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

5-2
SCANNER/INTERNET FAX
SPECIAL MODES
SPECIAL MODES  . . . . . . . . . . . . . . . . . . . . . . . . .  5-71
STORING SCAN OPERATIONS (Programs)  . . . .  5-73
ERASING PERIPHERAL SHADOWS ON THE 
IMAGE (Erase) . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-75
SCANNING AN ORIGINAL AS TWO 
SEPARATE PAGES (Dual Page Scan) . . . . . . . . .  5-77
SENDING AN IMAGE AT A SPECIFIED TIME 
(Timer Transmission)  . . . . . . . . . . . . . . . . . . . . . .  5-79
WHITENING FAINT COLOURS IN THE 
IMAGE...