Sharp Mx4141n Owners Manual

							11
PART NAMES
Using the [Home Screen] button 
Use your  nger to touch the [Home Screen] button. If you use a pen or other tool to touch the button, it may  
not operate properly.Risk of malfunctioning if you use with jewelry or other accessories.
Tray 1
Tray 5 (when a large capacity  tray is installed)* Tray 2
Tray 4  
(when a stand/2000 sheet paper drawer is installed)*
Tray 3 
(when a stand/2000 sheet paper drawer is installed)* Tray 3 (when a stand/1x500/2x500
sheet paper drawer is installed)* 
Tray 4 (when a stand/2x500 sheet  paper drawer is installed)*
Automatic
document feeder
Operation Panel
Finisher*
Right Tray*
USB port (A type)
Bypass tray Front cover
Saddle finisher
 (large stacker)*
Paper pass unit* Punch module*
Main power switch
Output
 tray
 (centre t ray)
Keyboard*
Touch Panel
[Home Screen] button (    )
Main power  indicator 
[POWER SAVE] button/indicatorPower button
Finisher (large stacker)*
Saddle finisher*
* Optional 
						

							12
This machine has a main power switch, found at the bottom left after the front cover is opened, and a power button (
), located on the operation panel.
CAUTION
•  When turning off the power, make sure that the indicators on the operation panel turn 
off as well.
•  If the machine suddenly turns off, such as in the event of a power failure, turn the  machine on again, and then turn off the machine following the correct procedure for  
turning off the machine.
Switching off the main power switch or removing the power cord from the outlet while any of the indicators are lit or blinking may damage the hard drive and cause data to be lost.
•  Switch off both the power button (
) and the main power switch and unplug the 
power cord if you suspect a machine failure, if there is a bad thunderstorm nearby, or  when you are moving the machine.
Turning on the power
•  Switch the main power switch to the “ 
  ” position.
•  After the main power indicator lights in green, press the power button (
).
Turning off the power
(1)   Press the power button (
) to turn off the power.
(2)   Switch the main power switch to the “
” position.
Restarting the machine
In order for some settings to take effect, the machine must be restarted. If a message in the  touch panel prompts you to restart the machine, press the power button (
) to turn off the 
power and then press the key again to turn the power back on.
•  When using the fax or Internet fax function, always keep the main power switch in 
the “ 
 ” position.
•  In some states of the machine, pressing the power button (
) to restart will not 
make the settings take effect. In this case, use the main power switch to switch  
the power off and then on.
Main power switch Power button
Main power indicator
TURNING THE POWER ON AND OFF 
						

							13
Tap
Touch and then quickly release  
the  nger.Used to select keys, tabs, checkboxes, etc.Double tap
Touch the screen twice.  Use this operation to enlarge or reduce the image in the 
preview.Drag
Drag (slide the  nger in the  desired direction) to rotate or delete original pages displayed 
as a preview.Pinch
Touch the screen with two  ngers  and move them toward each 
other. This is used to reduce the 
browser and preview display. 
Press
Touch a key and keep the  
 nger on the key for a short time.
Flick
Flick (quickly swipe with the  
 nger) to scroll the preview image.Slide   
Slide the  nger on the scroll  bar to move up or down through a long list.Spread
Touch the screen with two  ngers  and move them away from each 
other. This is used to enlarge the 
browser and preview display. 
The home screen is the  rst screen to be displayed. Touch an icon to display the corresponding screen. When the 
 button is touched on the operation panel, this home 
screen is displayed. 
* The actual screen displayed may vary depending on the model or how the machine  has been customized.
OPERATING THE TOUCH PANEL
In addition to the conventional single tap operation, you can also operate the touch panel using presses,  icks, and slides.HOME SCREENUp to 10 icons are displayed.Fixed areaUp to 12 icons are displayed. Icons that are not displayed can be displayed 
by scrolling horizontally.Scroll area
HDD  le retrieve
Operation Guide
Job status
System settingsThe scanned original is saved. 
Saved  data  can  be  edited  and  used  again  for another operation.
E-mail
Fax
The scanned original is attached to an e-mail and sent.
The scanned original is sent using the telephone line.
FTP/DesktopT h e   s c a n n e d   f i l e   i s   s e n t   t o   a   s p e c i f i e d 
directory  of  an  FTP  server  or  to  a  specified 
f o l d e r   o n   a   c o m p u t e r   c o n n e c t e d   t o   t h e network. Displays the status of the current job.
Allows  various  settings  to  be  adjusted  according  to  how  the  machine will be used or its current state of use. Refer to the Operation Guide when you have questions about operating the machine.
Page switch keysUse these keys to view a hidden page in the scrolling area.
Action panelTap  an  item  to  edit  Home  Screen  or  other  operation.
CopyThe scanned original is printed.CLOUD PORTALThis service may not be available  in some regions.  
						

							14
Step 
1
Select a  function
Step 
2
Step 
3
Step 
4
Step 
5
Place the original
Scan
Confirming preview
Start
Select the [Copy] key or Copy icon.
Output settings Editing
Confirmation
Con rm the results of the scan and any  
edits or settings.
Enter the number of prints and 
start printing.
Face up/down, orientation, missing  pages, folded pages
Page editing, deleting, etc.
OVERVIEW OF COPY OPERATION
Tap
Print 1 set of copies
Scan the originalTap
Scan another original
Tap
Document filing
The scanned original and the settings are  saved on the hard disk and can be used again.
Print
Tap
TapPlace the original in the automatic  document feeder
Insert all the way
Do not pass this line
Drag
Place the original on the document  glassAlign the edges Upward
Adjust to original size
Align to corner
Lift open
Downward
Placing a thick book         
						

							15
TransmissionStoring
For functions other than copy.
OVERVIEW OF OTHER OPERATIONSStep 
1
Select a  function
Step 
5
Step 
2
Place the original
Step 
3
Select the address
Step 
4
Confirmation
Start
HDD file  retrieve
Scan and store the file
E-mail Fax
Place the original in the automatic  document feeder
Insert all the way
Do not pass this line
Lift open
Downward
Tap
Tap
Select the address
Confirmation
Face up/down OrientationMissing pagesFolded pages
Scan the original
Select the folder
Tap
Place the original on the document  glass Align the edges Upward
Adjust to original size
Align to corner
Placing a thick book           
						

							16
•  Do not dispose of used toner cartridges. Place them in a plastic bag and keep them. The technician will collect the used toner cartridges when performing maintenance. 
•  To view the approximate amount of toner remaining, continually touch the [Home Screen] key during printing or when the machine is idle. The percentage of toner remaining will appear in the display while the key is touched.
•  When the percentage falls to “25-0%”, obtain a new toner cartridge and keep it ready for replacement.
•  Depending on your conditions of use, the colour may become faint or the image blurred.
MAINTENANCEWhen toner runs low, the colour and the message “Prepare a new toner cartridge.” appears. 
Prepare a new toner cartridge for the indicated colour.When toner runs out, the colour and the message “Replace the toner cartridge.” appears. 
Replace the toner cartridge for the indicated colour.Example: Replacing the yellow toner cartridge 
When a paper misfeed occurs, the message “A misfeed has occurred.” will appear in the touch  panel and printing and scanning will stop. In this event, touch the [Check how to remove misfeeds] key in the touch panel. 
When the key is touched, instructions for removing the misfeed will appear. Follow the 
instructions. When the misfeed is cleared, the message will automatically clear.
Old toner cartridge
Shake 5 or 6 times Gently insert straight into the machine  
until it locks Close
Open New toner cartridge
•  Do not throw toner cartridges into a  re. Toner may 
 y and cause burns.
•  Store toner cartridges out of the reach of small 
children.
•  Always store toner cartridges on their sides. If toner  cartridges are stored on end, the toner may harden  and become unusable.
•  Please use SHARP-recommended toner cartridges.  If toner cartridges other than SHARP-recommended 
toner cartridges are used, the machine may not 
attain full quality and performance and there is a  risk 
of damage to the machine.
•  The fusing unit and the output unit are hot.
•  Take care not to touch the fusing unit when  removing a misfeed.
•  There is a risk of burning.
Replacing a toner cartridgeRemoving misfeeds
Caution
Caution
Gently pull straight  out with both hands
1
2
3
4
5  
						

							17
Basic 
Name MX-4140N/MX4141N/MX-5140N/MX-5141N 
Type Desktop
Colour Full colour
Copier system Laser electrostatic copier Scanning  resolutionScan (B/W): 600 × 600 dpi, 600 × 400 dpiScan (full colour): 600 × 600 dpiPrint: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi
Gradation Scan: equivalent to 256 levels / Print: equivalent to 256 levels Original paper  sizes Max. A3 (1
1 x 17) for sheets and bound documents
Copy sizes A3 wide (12 × 18) to A5R (5-1/2 × 8-1/2R), Transparency  lm, Heavy paper, Envelopes
Tray 1-4*: A3, B4, A4, A4R, B5, B5R, A5R, 11 × 17, 8-1/2 × 14, 
8-1/2 × 13-1/2, 8-1/2 × 13-2/5, 8-1/2 × 13, 8-1/2 × 11, 8-1/2 × 11R, 7-1/4 × 10-1/2R, 5-1/2 × 8-1/2R
Multi-bypass tray: A3 wide (12 × 18) to A5R (5-1/2 × 8-1/2R), Transparency  lm, Heavy paper, 
Envelopes, Long size paper (90 to 297 mm × 433 to 1,200 mm (3-35/64 to 11-45/64 × 17-3/64 to 47-15/64))
Lost margin (leading edge): 4 mm (11/64) ± 1 mm (± 3/64)Lost margin (trailing edge): 2 mm (6/64) - 5 mm (- 13/64)Leading edge / trailing edge: total 8 mm (21/64) or less
Near edge / far edge: total 4 mm (11/64) ± 2 mm (± 6/64) or less
*  When the Stand/2000 sheet paper drawer is installed, only A4 (8-1/2 × 11) can be used in trays 
3 and 4.
Warm-up time MX-4140N / MX-4141N  MX-5140N / MX-5141N
28 seconds  30 seconds
 This may vary depending on the ambient conditions.
First-copy time   MX-4140N / MX-4141N  MX-5140N / MX-5141N
Full colour:  6.7 seconds  5.7 seconds
B/W:  4.7 seconds  4.1 seconds
 This may vary depending on the state of the machine.
Continuous 
copying speeds*(when shifter is not in operation)     MX-4140N / MX-4141N
A4, 8-1/2 × 11  B5, 7-1/4 × 10-1/2  41 copies/min.
A4R, 8-1/2 × 11R  B5R, 7-1/4 × 10-1/2R  26 copies/min.
B4, 8-1/2 × 14    22 copies/min.
A3, 11 × 17    19 copies/min.
*  Continuous speed for same original source. Output may be temporarily 
interrupted to stabilize image quality. MX-5140N / MX-5141N51 copies/min.31 copies/min.26 copies/min.23 copies/min.
Copy ratios
Same size: 1:1 ± 0.8 %  Enlarge: 115 %, 122 %, 141 %, 200 %, 400 % 
  Reduce: 25 %, 50 %, 70 %, 81 %, 86 %, 100 %Zoom range: 25 to 400 % (25 - 200 % using RSPF/DSPF) in 1 % increments, 
total 376 increments. Can calculate zoom rate when mm is speci ed.
Paper feed / capacity 500 x 2 sheets in 2 trays plus 100-sheet multi-bypass tray
  Using 80 g/m 2
 (21 lbs. bond) weight paper
Max. paper feed / max. capacity 6,600 sheets in 4 trays (500 × 2 + 1,150 + 850) plus 100-sheet multi-bypass tray plus 3,500 sheets in large capacity tray
  Using 80 g/m 2
 (21 lbs. bond) weight paper
Continuous copy Max. 999 copies Memory Standard: 4 GB    HDD: 320 GB 
  1 GB = One billion bytes when referring to hard drive capacity.  Actual format 
capacity is less.
Ambient environment Operating environment
10 °C (54 °F) to 35 °C (91 °F) (20 % to 85 % RH) 590 - 1,013 hpa
Standard environment 20 °C (68 °F) to 25 °C (77 °F) (65 ± 5 % RH)
Required power supply Local voltage ± 10 % (For the power supply requirements, see the name plate in the lower corner of the left side of the machine.)
Power consumption  Max. 1.84 kW (including options such as the desk)
Dimensions MX-4140N / MX-5140N
648 mm (W) × 764 mm (D) × 954 mm (H) (25-33/64 (W) × 30-3/32 (D) × 37-9/16 (H))
MX-4141N / MX-5141N648 mm (W) × 764 mm (D) × 960 mm (H) (25-33/64 (W) × 30-3/32 (D) × 37-51/64 (H))
WeightMX-4140N / MX-5140N 
Approx. 119 kg (262 lbs.) MX-4141N / MX-5141NApprox. 125 kg (276 lbs.) /Approx. 126 kg (278 lbs.)
Overall  dimensions With multi-bypass tray extended
987 mm (W) × 764 mm (D) (38-55/64 (W) × 30-3/32 (D))
With right side exit tray extended 972 mm (W) × 764  mm (D) (38-9/32 (W) × 30-3/32 (D))
SPECIFICATIONS 
						

							18
Automatic document feeder \(Standard equipment\)
NameMX-4140N / MX-5140N Reversing Single Pass FeederMX-4141N / MX-5141NDuplex Single Pass Feeder
Document feeder types Reversing Single Pass Feeder (RSPF) Duplex Single Pass Feeder (DSPF) 
Original paper sizes A3 (1 1 × 17) to A5 (5-1/2 × 8-1/2)
Original paper types Paper weight
Thin paper 35 g/m
2
 (9 lbs.) to 49 g/m 2
 (13 lbs.)
Plain paper 50 g/m 2
 (13 lbs.) to 128 g/m 2
 (34 lbs.)
Two-sided 50 g/m 2
 (13 lbs.) to 105 g/m 2
 (28 lbs.) 50 g/m 2
 (13 lbs.) to 128 g/m 2
 (34 lbs.)
Paper storage capacity 100 sheets (80 g/m
2
 (21 lbs.))
(or maximum stack height of 13 mm (1/2))
150 sheets (80 g/m 2
 (21 lbs.))(or maximum stack height of 19.5 mm (50/64))
  B/W 
Scan speed (copy)  Colour 51 sheets/minute (600 × 600 dpi)51 sheets/minute (600 × 600 dpi)85 sheets/minute (600 × 400 dpi)51 sheets/minute (600 × 600 dpi)
  When scanning one-sided, A4 (8-1/2 × 11) horizontal documents
Tray
Name Stand / 1 × 500 Sheet paper drawer (MX-DE22)Stand / 2 × 500 Sheet paper drawer(MX-DE23)
Paper sizes A3 (11 × 17) to A5R (5-1/2 × 8-1/2R) Useable paper
60 g/m
2 (16 lbs.) to 220 g/m
2 (59 lbs.)
Paper capacity 500 sheets / 500 × 2 sheets Dimensions MX-DE22 / MX-DE23 615 mm (W) × 670 mm (D) × 272 mm (H) (24-39/64 (W) × 26-52/64 (D) × 10-23/32 (H))
Weight Approx. 18.5 kg (40.8 lbs.) Approx. 22.9 kg (50.5 lbs.)
Large capacity tray/  Stand/2000 sheet paper drawer
Name
Large capacity tray 
(MX-LC11) Stand/2000 sheet paper drawer (MX-DE21)
Paper sizes A4 (8-1/2 × 11) Tray 3/4: A4 (8-1/2 × 11) 
Useable paper 60 g/m 2
 (16 lbs.) to 105 g/m 2
 (28 lbs.) Tray 3/4: 60 g/m
2
 (16 lbs. bond) to 
105 g/m 2
 (28 lbs. bond)
Paper capacity 3,500 Tray 3: 1,150 
Tray 4: 850
Dimensions 370 mm (W) × 575 mm (D) × 520 mm (H) 
(14-9/16 (W) × 22-41/64 (D) × 20-15/32 (H))
615 mm (W) × 670 mm (D) × 272 mm (H) (24-39/64 (W) × 26-52/64 (D) × 10-23/32 (H))
Weight Approx. 29.2 kg (64.37 lbs.) Approx. 26 kg (57.4 lbs.)  
						

							19
SPECIFICATIONS
Finisher
Name Finisher (MX-FNX9) 
Paper sizes Depends on feeder speci  cations 
Useable paper Paper weight  55 g/m2
 (13 lbs.) to 300 g/m 2
 (110 lbs. Cover)
No. of trays 1 
Tray capacity (80g/m 2
 (21 lbs.)) Non-stapled 
A3 wide (12 × 18) / A3 (11 × 17) /B4 (8-1/2 × 14): 250 sheets
A4 (8-1/2 × 11) / A4R (8-1/2 × 11R) / B5 /
B5R (7-1/4 × 10-1/2R) / A5R (5-1/2 × 8-1/2R): 500 sheets
Staple function  A3 (11 × 17) / B4 (8-1/2 × 14): 30 units or 250 sheets A4 (8-1/2 × 11) / A4R (8-1/2 × 11R) / B5 /30 units or 500 sheets
   Offset output is not available for A3 wide (12 × 18) /
B5R (7-1/4 × 10-1/2R) / A5R (5-1/2 × 8-1/2R).
Max. no. of stapled sheets(90 g/m 2
 (24 lbs.)) Max. no. of 50 sheets (A4 (8-1/2 × 11), A4R (8-1/2 × 11R), B5)
Max. no. of 30 sheets (A3 (11 × 17), B4 (8-1/2 × 14))
Staple position 1 bottom, 1 top, 2 middle 
Required power supply Supplied from this machine 
Weight Approx. 12 kg (26.5 lbs.) Dimensions When output paper tray is stored 
  428 mm (W) x 593 mm (D) x 198 mm (H) 
  (16-55/64 (W) x 23-11/32 (D) x 7-51/64 (H))When output paper tray is extended
  623 mm (W) x 593 mm (D) x 198 mm (H) 
  (24-17/32 (W) x 23-11/32 (D) x 7-51/64 (H))
Saddle stitch finisher \(large stacker\)
MX-FN18 
Name Saddle Stitch Finisher (large stacker) 
Paper sizes Depends on feeder speci cations 
Useable paper Paper weight  55 g/m
2
 (13 lbs. bond) to 300 g/m 2
 (110 lbs. Cover)
No. of trays 2 
Tray capacity (80 g/m 2
 (21 lbs.)) Upper tray
Non-stapled  A3 wide (12 × 18) / A3 (11 × 17) / B4 (8-1/2 × 14) /  A4R (8-1/2 × 11R) / B5R (7-1/4 × 10-1/2R): 650 sheets 
A5R (5-1/2 × 8-1/2R): A4 (8-1/2 × 11) / B5: 1,550 sheets
Staple function  A4 (8-1/2 × 11) / B5: 100 units or 1,550 sheets A3 (11 × 17) / B4 (8-1/2 × 14) / A4R (8-1/2 × 11R):50 units or 650 sheets
Lower tray Non-stapled  A3 wide (12 × 18) / A3 (11 × 17) / B4 (8-1/2 × 14) /  A4R (8-1/2 × 11R) / B5R (7-1/4 × 10-1/2R): 650 sheets
A4 (8-1/2 × 11) / B5: 2,450 sheetsA5R (5-1/2 × 8-1/2R): 1,700 sheets
Staple function  A4 (8-1/2 × 11) / B5: 100 units or 1,550 sheets A3 (11 × 17) / B4 (8-1/2 × 14) / A4R (8-1/2 × 11R):50 units or 650 sheets
Saddle stitch tray  10 units (11 to 15 sheets), 15 units (6 to 10 sheets),  25 units (1 to 5 sheets)
   Offset output is not available for A3 wide (12 ×  18) / B5R (7-1/4 × 10-1/2R) /
A5R (5-1/2 × 8-1/2R).
Required power supply Supplied from this machine 
Weight Approx. 73 kg (160.9 lbs.) Dimensions When output paper tray is stored 
  640 mm (W) × 641.5 mm (D) × 1100 mm (H) 
  (24-39/64 (W) × 25-1/4 (D) × 43-19/64 (H))When output paper tray is extended
  753 mm (W) × 641.5 mm (D) × 1100 mm (H) 
  (29-1/32 (W) × 25-1/4 (D) × 43-19/64 (H))
Max. no. of stapled sheets (90 g/m 2
 (24 lbs.)) Max. no. of 50 sheets (A4 (8-1/2 × 11), B5)
Max. no. of 30 sheets (A3 (11 × 17), B4 (8-1/2 × 14), A4R (8-1/2 × 11R))
Staple position 1 bottom, 1 top, 2 middle 
Staple method (for saddle stitch) Centred fold with stapling in 2 centre places 
Saddle stitch fold position Centred fold 
Saddle usable sizes A3 (11 × 17) / B4 (8-1/2 × 14) / A4R (8-1/2 × 11R) / A3 wide (12 × 18) Saddle usable paper weight 60 g/m
2
 (16 lbs.) to 220 g/m 2
 (80 lbs. Cover)
Paper weighting 106 g/m 2
 (28 lbs.) to 220 g/m 2
 (80 lbs. Cover) is only able to be 
used in cover mode and for single sheet fold.
Max. no. of saddle-stitched sheets Max. no. of 15 sheets (80 g/m
2
 (21 lbs.)):
14 sheets (80 g/m 2
 (21 lbs.)) + 1 sheet (220 g/m 2
 (80 lbs. Cover))
Max. no. of 10 sheets (90 g/m 2
 (24 lbs.)):
9 sheets (90 g/m 2
 (24 lbs.)) + 1 sheet (220 g/m 2
 (80 lbs. Cover)) 
						

							20
MX-FN10 
Name Saddle Stitch Finisher
Paper sizes Depends on feeder speci cations
Useable paper Paper weight  55 g/m2
 (13 lbs.) to 300 g/m 2
 (110 lbs. Cover)
No. of trays 1 
Tray capacity (80 g/m 2 
(21 lbs.)) Upper tray
Non-stapled  A3 wide (12 × 18) / A3 (11 × 17) / 
B4 (8-1/2 × 14) / A5R (5-1/2 × 8-1/2R): 500 sheets
A4 (8-1/2 × 11) / A4R (8-1/2 × 11R) / B5 /B5R (7-1/4 × 10-1/2R): 1,000 sheets
Staple function  A3 (11 × 17) / B4 (8-1/2 × 14): 30 units or 500 sheets A4 (8-1/2 × 11) / A4R (8-1/2 × 11R) / B5 / B5R:
30 units or 1,000 sheets (For A4 (8-1/2 × 11), B5, 50 sets 
only when stapled in a single location on the far s ide)  
Saddle stitch tray  10 units (11 to 15 sheets), 15 units (6 to 10 sheets), 20 units (1 to 5 sheets) 
   Offset output is not available for A3 wide (12 ×  18) / A5R (5-1/2 × 8-1/2R).
Required power supply Supplied from this machine 
Weight Approx. 40 kg (88.2 lbs.) Dimensions When output paper tray is stored 
  497 mm (W) × 631 mm (D) × 988 mm (H) 
  (19-9/16 (W) × 24-27/32 (D) × 38-57/64 (H))When output paper tray is extended
  656 mm (W) × 631 mm (D) × 988 mm (H) 
  (25-53/64 (W) × 24-27/32 (D) × 38-57/64 (H))
Max. no. of stapled sheets (90 g/m 2
 (24 lbs.)) Max. no. of 50 sheets (A4 (8-1/2 × 11), A4R (8-1/2 × 11R), B5, B5R)
Max. no. of 25 sheets (A3 (11 × 17), B4 (8-1/2 × 14))
Staple position 1 bottom, 1 top, 2 middle 
Staple method (for saddle stitch) Centred fold with stapling in 2 centre places 
Saddle stitch fold position Centred fold 
Saddle usable sizes A3 (11 × 17) / B4 (8-1/2 × 14) / A4R (8-1/2 × 11R) Saddle usable paper weight 60 g/m
2
 (16 lbs.) to 220 g/m 2
 (80 lbs. Cover)
Paper weighting 106 g/m 2
 (28 lbs.) to 220 g/m 2
 (80 lbs. Cover) is only able to be 
used in cover mode and for single sheet fold.
Max. no. of saddle-stitched sheets Max. no. of 15 sheets (80 g/m
2
 (21 lbs.)):
14 sheets (80 g/m 2
 (21 lbs.)) + 1 sheet (220 g/m 2
 (80 lbs. Cover))
Max. no. of 10 sheets (90 g/m 2
 (24 lbs.)):
9 sheets (90 g/m 2
 (24 lbs.)) + 1 sheet (220 g/m 2
 (80 lbs. Cover))
Saddle stitch finisher
Finisher \(large stacker\)
Name Finisher (MX-FN11) 
Paper sizes Depends on feeder speci cations
Useable paper Paper weight  55 g/m 2
 (13 lbs.) to 300 g/m 2
 (110 lbs. Cover)
No. of trays 2 
Tray capacity (80g/m 2
 (21 lbs. bond)) Upper tray
Non-stapled  A3 wide (12 × 18) / A3 (11 × 17) / B4 (8-1/2 × 14) / 
A4R (8-1/2 × 11R) / B5R (7-1/4 × 10-1/2R): 650 sheets 
A5R (5-1/2 × 8-1/2R): A4 (8-1/2 × 11) / B5: 1,550 sheets
Staple function  A4 (8-1/2 × 11) / B5: 100 units or 1,550 sheets
A3 (11 × 17) / B4 (8-1/2 × 14) / A4R (8-1/2 × 11R):50 units or 650 sheets
Lower tray
Non-stapled  A3 wide (12 × 18) / A3 (11 × 17) / B4 (8-1/2 × 14) /  A4R (8-1/2 × 11R) / B5R (7-1/4 × 10-1/2R): 650 sheets
A4 (8-1/2 × 11) / B5: 2,450 sheetsA5R (5-1/2 × 8-1/2R): 1,700 sheets
Staple function  A4 (8-1/2 × 11) / B5: 100 units or 1,550 sheets A3 (11 × 17) / B4 (8-1/2 × 14) / A4R (8-1/2 × 11R):50 units or 650 sheets
   Offset output is not available for A3 wide (12 ×  18) / B5R (7-1/4 × 10-1/2R) / 
A5R (5-1/2 × 8-1/2R).
Required power supply Supplied from this machine 
Weight Approx. 44 kg (97 lbs.) Dimensions When output paper tray is stored 
  515 mm (W) × 645 mm (D) × 1100 mm (H) 
  (20-9/32 (W) × 25-25/64 (D) × 43-19/64 (H))When output paper tray is extended
  645 mm (W) × 645 mm (D) × 1100 mm (H) 
  (25-25/64 (W) × 25-25/64 (D) × 43-19/64 (H))
Max. no. of stapled sheets (90 g/m 2
 (24 lbs.)) Max. no. of 50 sheets (A4 (8-1/2 × 11), B5)
Max. no. of 30 sheets (A3 (11 × 17), B4 (8-1/2 × 14), A4R (8-1/2 × 11R))
Staple position 1 bottom, 1 top, 2 middle
Punch module \(for finisher\) 
Name Punch module for MX-FNX9 MX-PNX1A, MX-PNX1B, MX-PNX1C, MX-PNX1D Punch module for MX-FN11MX-PNX6A, MX-PNX6B, MX-PNX6C, MX-PNX6D
Paper size for punch module A3 (11 × 17) to B5R (7-1/4 × 10-1/2R) Holes
MX-PNX1A 2 holes, MX-PNX1B 3 holes 
MX-PNX1C 4 holes, MX-PNX1D 4 holes (wide) MX-PNX6A 2 holes, MX-PNX6B 3 holes
MX-PNX6C 4 holes, MX-PNX6D 4 holes (wide)
Required power supply Supplied from Finisher Dimensions
98 mm (W) × 477 mm (D) × 137 mm (H) (3-55/64 (W) × 18-25/32 (D) × 5-13/32 (H))
115 mm (W) × 600 mm (D) × 995 mm (H)  (4-39/64 (W) × 24 (D) × 39-13/16 (H))
Weight Approx. 3 kg (6.6 lbs.) Approx. 8 kg (17.6 lbs.)