Sharp Mx4141n Owners Manual

Q UICK  START  GUIDE
DIG ITA L  FULL COLO UR MULTI FUNCT IONAL SYST EMMX -4 140N/MX-4 14 1 N /M X-51 4 0N / M X-5 1 41 N
Keep this manual close at hand for reference whenever needed.  

2
For the users of the fax function 
 Important safety instructions
•  If any of your telephone equipment is not operating properly, you should immediately remove  it from your telephone line, as it may cause harm to the telephone network.
•  Never install telephone wiring during a lightning storm. 
•  Never install telephone sockets in wet locations unless the socket is speci cally designed for  wet locations.
•  Never touch uninsulated telephone wires or terminals unless the telephone line has been...

3
FAX interface cable and Line cable
These special accessories must be used with the device. 
The Declaration of Conformity is included in optional Facsimile expansion kit (MX-FX11).Notice for users in the UK
MAINS PLUG WIRING INSTRUCTIONS 
The mains lead of this equipment is already  tted with a mains plug which is either a non-rewireable (moulded) or a rewireable type. Should the fuse need to be replaced, a BSI or ASTA approved fuse to BS1362 marked 
 or 
 and of the same rating as the one removed from...

4
SOFTWARE LICENCE
The SOFTWARE LICENCE will appear when you install the software from the CD-ROM. By using all or any portion of the software on the CD-ROM or in the machine, you are  
agreeing to be bound by the terms of the SOFTWARE LICENCE. 
The explanations in this manual are based on American English and the North American version of the software. 
Software for other countries and regions may vary slightly from the North American version.
•  The explanations in this manual assume that you have a...

Contents
5
OPERATION MANUALS AND HOW TO USE THEM
  
 
6
CAUTIONS
    
7
Symbols in this manual
   ——————————————————————— 
7
Power notes
   ————————————————————————————  
7
Installation notes
   ——————————————————————————  
8
About consumables
   —————————————————————————  
9
Handling precautions
   ————————————————————————  
9
PART NAMES
    
11
TURNING THE POWER ON AND OFF
    
12
HOME SCREEN
    
13
For operating the touch panel and functions the icon.
OVERVIEW OF COPY OPERATION
   
14
OVERVIEW OF...

6
OPERATION MANUALS AND HOW TO USE THEMQuick Start Guide \(this document\) Features important safety notes, names of parts and  components, information about the power-on procedure, operation overviews, information for people who manage the machine, and information about other aspects of this machine.
Read this section before using the machine for the  rst time.Users Manual Can be downloaded from the machine to a computer and  viewed. Refer to this document to learn more about printer mode and settings...

7
When moving the machine, switch off the main power and remove the power plug from the outlet  before moving. 
The cord may be damaged, creating a risk of  re or electrical shock.
 CAUTION
  
Pulling on the cord may cause damage such as wire exposure and breakage, and may result in  re or  electrical shock.If you will not use the machine for a long time, be sure to remove the power plug from the outlet for  safety.
Power notes
 WARNING
Be sure to connect the power cord only to a power outlet that meets...

8
Do not install the machine on an unstable or slanted surface. Install the machine on a surface that can  withstand the weight of the machine. Risk of injury due to the machine falling or toppling. 
If peripheral devices are to be installed, do not install on an uneven  oor, slanted surface, or otherwise 
unstable surface. Danger of slippage, falling, and toppling. Install the product on a  at, stable surface that can withstand the weight of the product.Do not install in a location with moisture or...

9
CAUTIONS
D 
Toner may  y and cause burns.
About consumables
 CAUTION
Store a toner cartridge out of the reach of children.
Do
o 
If the liquid spills or the object falls into the machine,  re or electrical  shock may result.Do not remove the machine casing. High-voltage parts inside the machine may cause electrical shock.D Doing so may result in personal injury or damage to the machine.D 
If gas from the spray comes in contact with hot ele ctrical components or the fusing unit inside 
the machine, fire...

10
Do not look directly at the light source. 
Doing so may damage your eyes.Do not block the ventilation ports on the machine. Do not install the machine in a location that  will block the ventilation ports. 
Blocking the ventilation ports will cause heat to build up in the machine, creating a risk of  re.
 CAUTION
The fusing unit and paper exit area are hot. When removing a  misfeed, do not touch the fusing unit and paper exit area. Take care not to burn yourself.When loading paper, removing a misfeed,...