Sharp Mx4141n Owners Manual

11
PART NAMES
Using the [Home Screen] button 
Use your  nger to touch the [Home Screen] button. If you use a pen or other tool to touch the button, it may  
not operate properly.Risk of malfunctioning if you use with jewelry or other accessories.
Tray 1
Tray 5 (when a large capacity  tray is installed)* Tray 2
Tray 4  
(when a stand/2000 sheet paper drawer is installed)*
Tray 3 
(when a stand/2000 sheet paper drawer is installed)* Tray 3 (when a stand/1x500/2x500
sheet paper drawer is installed)* 
Tray 4...

12
This machine has a main power switch, found at the bottom left after the front cover is opened, and a power button (
), located on the operation panel.
CAUTION
•  When turning off the power, make sure that the indicators on the operation panel turn 
off as well.
•  If the machine suddenly turns off, such as in the event of a power failure, turn the  machine on again, and then turn off the machine following the correct procedure for  
turning off the machine.
Switching off the main power switch or...

13
Tap
Touch and then quickly release  
the  nger.Used to select keys, tabs, checkboxes, etc.Double tap
Touch the screen twice.  Use this operation to enlarge or reduce the image in the 
preview.Drag
Drag (slide the  nger in the  desired direction) to rotate or delete original pages displayed 
as a preview.Pinch
Touch the screen with two  ngers  and move them toward each 
other. This is used to reduce the 
browser and preview display. 
Press
Touch a key and keep the  
 nger on the key for a short time....

14
Step 
1
Select a  function
Step 
2
Step 
3
Step 
4
Step 
5
Place the original
Scan
Confirming preview
Start
Select the [Copy] key or Copy icon.
Output settings Editing
Confirmation
Con rm the results of the scan and any  
edits or settings.
Enter the number of prints and 
start printing.
Face up/down, orientation, missing  pages, folded pages
Page editing, deleting, etc.
OVERVIEW OF COPY OPERATION
Tap
Print 1 set of copies
Scan the originalTap
Scan another original
Tap
Document filing
The scanned...

15
TransmissionStoring
For functions other than copy.
OVERVIEW OF OTHER OPERATIONSStep 
1
Select a  function
Step 
5
Step 
2
Place the original
Step 
3
Select the address
Step 
4
Confirmation
Start
HDD file  retrieve
Scan and store the file
E-mail Fax
Place the original in the automatic  document feeder
Insert all the way
Do not pass this line
Lift open
Downward
Tap
Tap
Select the address
Confirmation
Face up/down OrientationMissing pagesFolded pages
Scan the original
Select the folder
Tap
Place the...

16
•  Do not dispose of used toner cartridges. Place them in a plastic bag and keep them. The technician will collect the used toner cartridges when performing maintenance. 
•  To view the approximate amount of toner remaining, continually touch the [Home Screen] key during printing or when the machine is idle. The percentage of toner remaining will appear in the display while the key is touched.
•  When the percentage falls to “25-0%”, obtain a new toner cartridge and keep it ready for replacement.
•...

17
Basic 
Name MX-4140N/MX4141N/MX-5140N/MX-5141N 
Type Desktop
Colour Full colour
Copier system Laser electrostatic copier Scanning  resolutionScan (B/W): 600 × 600 dpi, 600 × 400 dpiScan (full colour): 600 × 600 dpiPrint: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi
Gradation Scan: equivalent to 256 levels / Print: equivalent to 256 levels Original paper  sizes Max. A3 (1
1 x 17) for sheets and bound documents
Copy sizes A3 wide (12 × 18) to A5R (5-1/2 × 8-1/2R), Transparency  lm, Heavy paper,...

18
Automatic document feeder \(Standard equipment\)
NameMX-4140N / MX-5140N Reversing Single Pass FeederMX-4141N / MX-5141NDuplex Single Pass Feeder
Document feeder types Reversing Single Pass Feeder (RSPF) Duplex Single Pass Feeder (DSPF) 
Original paper sizes A3 (1 1 × 17) to A5 (5-1/2 × 8-1/2)
Original paper types Paper weight
Thin paper 35 g/m
2
 (9 lbs.) to 49 g/m 2
 (13 lbs.)
Plain paper 50 g/m 2
 (13 lbs.) to 128 g/m 2
 (34 lbs.)
Two-sided 50 g/m 2
 (13 lbs.) to 105 g/m 2
 (28 lbs.) 50 g/m 2
 (13...

19
SPECIFICATIONS
Finisher
Name Finisher (MX-FNX9) 
Paper sizes Depends on feeder speci  cations 
Useable paper Paper weight  55 g/m2
 (13 lbs.) to 300 g/m 2
 (110 lbs. Cover)
No. of trays 1 
Tray capacity (80g/m 2
 (21 lbs.)) Non-stapled 
A3 wide (12 × 18) / A3 (11 × 17) /B4 (8-1/2 × 14): 250 sheets
A4 (8-1/2 × 11) / A4R (8-1/2 × 11R) / B5 /
B5R (7-1/4 × 10-1/2R) / A5R (5-1/2 × 8-1/2R): 500 sheets
Staple function  A3 (11 × 17) / B4 (8-1/2 × 14): 30 units or 250 sheets A4 (8-1/2 × 11) / A4R (8-1/2 × 11R)...

20
MX-FN10 
Name Saddle Stitch Finisher
Paper sizes Depends on feeder speci cations
Useable paper Paper weight  55 g/m2
 (13 lbs.) to 300 g/m 2
 (110 lbs. Cover)
No. of trays 1 
Tray capacity (80 g/m 2 
(21 lbs.)) Upper tray
Non-stapled  A3 wide (12 × 18) / A3 (11 × 17) / 
B4 (8-1/2 × 14) / A5R (5-1/2 × 8-1/2R): 500 sheets
A4 (8-1/2 × 11) / A4R (8-1/2 × 11R) / B5 /B5R (7-1/4 × 10-1/2R): 1,000 sheets
Staple function  A3 (11 × 17) / B4 (8-1/2 × 14): 30 units or 500 sheets A4 (8-1/2 × 11) / A4R (8-1/2 ×...