Sharp MX M310 User Manual

49
CONVENIENT COPY FUNCTIONS
3
COVER  COPY
Cover copy mode is used to add a cover to the front or back, or both the front and back, of a multipage document.
To use cover copy mode, the RSPF must be used.
Copying onto a cover Not copying onto a cover
One-sided originals
Back cover 
(no copying)
Front cover 
(can copy onto front side) One-sided copies 
(copying onto a cover)
Two-sided originals
SHARPSHARPCover original
1234
1234
3
45 12
Cover original
SHARP
Back cover 
(no copying)
Front cover 
(can copy...

50
CONVENIENT COPY FUNCTIONS
1Touch the   key and then touch the 
[COVER] key in the special modes 
menu screen.
The cover  setting screen 
will appear.
The cover icon ( , etc.) 
will also appear in the 
screen to indicate that 
the function is turned on.
2Select the cover(s) that you wish to 
add.
To add only a front cover, touch the [FRONT] key. To 
add only a back cover, touch the [BACK] key. To add 
both a front and back cover, touch the 
[FRONT+BACK] key.
3Specify whether or not the front cover 
is...

51
CONVENIENT COPY FUNCTIONS
3
B/W REVERSE COPY
The B/W REVERSE feature is used to reverse black and white in a copy to create a negative image.
 When the B/W reverse function is selected, the 
exposure mode will be automatically set to TEXT 
mode. Other exposure modes cannot be selected. If 
B/W reverse is cancelled, TEXT mode will not 
automatically be cancelled.
1Touch the   key and then touch the 
[B/W REVERSE] key in the special 
modes menu screen.
The [B/W REVERSE] 
key is highlighted.
The B/W...

52
CONVENIENT COPY FUNCTIONS
CARD SHOT
The front and back of a card can be copied onto one sheet of paper.
This function is convenient for making copies for certification purposes and helps save paper.
 Copying is only possible on standard size paper.
 The image cannot be rotated when using this 
function.
1Make sure that a suitable paper size is  
selected, or select another size using 
the [PAPER SELECT] key.
2Touch the   key and then touch the 
[CARD SHOT] key in the special 
modes screen.
The CARD...

53
CONVENIENT COPY FUNCTIONS
3
5Place the original on the document 
glass.
Place the front side of the 
original face down and 
close the document 
cover/RSPF.
6Select the number of copies and any 
other desired copy settings, and then 
press the [START] key ( ).
The front side of the card 
is scanned.
7Place the back side of the original 
face down on the document glass.
8Press the [START] key ( ).
The back side of the card 
is scanned and copying 
begins.
 The original must be placed on the 
document...

54
4
Chapter 4
NETWORK SCANNER FUNCTION
INTRODUCTION
The network scanner expansion kit enables the machine to be used as a network scanner.
* Memory can be added by installing a commercially available 128 MB or 256 MB memory module (144-pin SDRAM 
SODIMM). For more information, consult your dealer.  To enable the network scanner function of this machine, a product key (password) must be entered using a 
administrator setting. This is only required once. Use the PRODUCT KEY program to enter the product...

55
4
ABOUT THE NETWORK SCANNER 
FUNCTION
When the network scanner function is added to the machine, a document or photo can be scanned into an image file 
and sent over a network or the Internet to a file server, e-mail destination, or your own computer. The scanned 
image can be sent to the following types of destinations:
1. The scanned image can be sent to a memory 
storage device on a network (a designated 
directory on an FTP server). (This is called 
Scan to FTP in this manual.) 
When sending...

56
SETTINGS AND PROGRAMMING 
REQUIRED FOR THE NETWORK 
SCANNER FEATURE
To use the Network Scanner feature, settings for the SMTP server, DNS server, and destination addresses must be 
established.
To establish the settings, use a computer that is connected to the same network as the machine to access the 
machines Web page.
SETTINGS REQUIRED FOR THE NETWORK SCANNER FUNCTION
To use transmit images using the network scanner function, configure the settings in the Web pages as follows:
The following...

57
NETWORK SCANNER FUNCTION
4
ABOUT THE WEB PAGE
When you access the Web page in the machine, the following page will appear in your browser.
A menu frame appears on the left side of the page. When you click an item in the menu, a screen appears in the 
right frame that allows you to establish settings for that item.
For detailed explanations of the procedures for establishing settings, click Help in the menu frame.
Menu frame
Click the menu items displayed here to configure the corresponding settings....

58
NETWORK SCANNER FUNCTION
BASIC SETTINGS FOR NETWORK SCANNING
Click Network Scanning in the menu frame, and then establish the required settings. These settings should only be 
established by the network administrator.
For detailed explanations of the procedures for establishing settings, click Help in the menu frame.
1Click Network Scanning in the menu 
frame.
The Network Scanning 
Setup page appears.
2Select the transmission methods that 
you wish to use.
Select the scanner delivery methods that you...