Sharp MX M310 User Manual

39
CONVENIENT COPY FUNCTIONS
3
1Place the original(s). (p.23, p.24)
2Touch the [OUTPUT] key.
3Touch the [STAPLE SORT] key.
When the [STAPLE 
SORT] key is selected, 
the offset tray is 
automatically selected as 
the output tray. The top 
tray and centre tray 
cannot be used.
4Touch the [OK] key.
5Select the number of copies and other 
copy settings, and then press the 
[START] key ( ).
6[When using the RSPF:]
Copying will start after all originals have been 
scanned.
[When using the document glass:]...

40
SPECIAL MODES
When the [SPECIAL MODES] key in the main screen of copy mode is touched, the special modes screen will 
appear. This screen contains the following special function keys.
[MARGIN SHIFT] key (p.42)
Use this to shift the image on the copy paper to 
create binding margins.
[ERASE] key (p.43)
Use this to erase peripheral shadows that occur 
when making copies of books and other thick 
originals.
[DUAL PAGE COPY] key (p.44)
Use this to make separate copies of the left and 
right pages of bound...

41
CONVENIENT COPY FUNCTIONS
3
GENERAL PROCEDURE FOR USING THE SPECIAL 
FUNCTIONS
1Touch the [SPECIAL MODES] key.
2Touch the key of the desired special 
mode.
Example:
Selecting the margin shift 
function
Procedures for modes that require further settings 
are explained starting on the next page.
SPECIAL MODES
2-SIDED COPY
MARGIN SHIFT
PAMPHLET COPY
Downloaded From ManualsPrinter.com Manuals 

42
CONVENIENT COPY FUNCTIONS
MARGIN SHIFT COPY
The margin shift function is used to automatically shift the text or image on the copy paper approximately 10 mm 
(1/2) in its initial setting.
1Touch the [MARGIN SHIFT] key in the 
special modes screen.
The margin shift setting 
screen will appear.
The margin shift icon 
( , etc.) will also 
appear in  the screen to 
indicate that the function 
is turned on.
2Select the shift direction.
Touch the [RIGHT], 
[LEFT], or [DOWN] key.
The selected key will be...

43
CONVENIENT COPY FUNCTIONS
3
ERASE COPY
The erase function is used to erase the shadow lines on copies that are produced when copying thick originals or 
books. The erase modes that can be selected are shown below. The erase width is initially set to 10 mm (1/2).
EDGE ERASE
Eliminates shadow lines around the edges of copies 
caused when heavy paper or a book is copied.
CENTRE ERASE
Eliminates shadow lines produced by the bindings of 
bound documents.
EDGE + CENTRE ERASE
Eliminates both the shadow lines...

44
CONVENIENT COPY FUNCTIONS
DUAL PAGE COPY
The dual page copy function produces separate copies of two adjoining pages on the document glass. It is 
especially useful when copying books and other bound documents.
[Example] Copying the right and left pages of a book
1Touch the [DUAL PAGE COPY] key in 
the special modes screen.
The [DUAL PAGE 
COPY] key is highlighted 
to indicate that the 
function is enabled, and 
the dual page copy icon 
( ) will appear in the 
screen.
2Touch the [OK] key in the...

45
CONVENIENT COPY FUNCTIONS
3
PAMPHLET COPY
The pamphlet copy function is used to arrange copies in the proper order for centre-stapling and folding into a 
booklet. Two original pages are copied onto each side of the copy paper, such that a total of four pages are copied 
onto each sheet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.
[Example]: Copying 8 originals with pamphlet copy
 Scan the originals in order from the first page to the 
last page. The order...

46
CONVENIENT COPY FUNCTIONS
JOB BUILD MODE
Use this function when you need to copy more originals than can be placed in the RSPF at once. (The maximum 
number of originals that can be placed in the RSPF at once is 100.)
Example: Copying 130 sheets (A4 (8-1/2 x 11) size originals)
1Touch the [JOB BUILD] key in the 
special modes menu screen.
The [JOB BUILD] key is 
highlighted.
The job build copy icon 
( ) will also appear in 
the screen to indicate 
that the function is 
enabled.
2Touch the [OK] key in...

47
CONVENIENT COPY FUNCTIONS
3
MULTI SHOT COPY
The multi shot copy function is used to copy two or four originals onto one sheet of copy paper in a specified order.
Example: Copying four originals onto one sheet of paper
 (Page number: 4 in 1 ( ), layout: ( )) 
 When using the multi shot copy function, place the 
originals, select the desired paper size, and select 
the copy mode before selecting the multi shot copy 
function in the special modes screen.

When using the multi shot copy function, the...

48
CONVENIENT COPY FUNCTIONS
ORIGINAL SIZE
If you wish to use the paper other than the automatically selected original size, original size setting is specified by 
the special modes. The mix feeding setting (p.26) is also selected here.
1Touch the   key and then touch the 
[ORIGINAL SIZE] key in the special 
modes menu screen.
The original size setting 
screen will appear.
2Touch the [MANUAL] key.
3Select the original size.
[MANUAL] key is highlighted and the selected paper 
size is displayed.
4Touch the...