Home > Sharp > Recorder > Sharp MD-MT877H PORTABLE MINIDISC RECORDER Operation Manual

Sharp MD-MT877H PORTABLE MINIDISC RECORDER Operation Manual

Here you can view all the pages of manual Sharp MD-MT877H PORTABLE MINIDISC RECORDER Operation Manual. The Sharp manuals for Recorder are available online for free. You can easily download all the documents as PDF.

Page 11

DEUTSCH
FRAN‚AIS
ESPA„OL
SVENSKA
ITALIANO
NEDERLANDS
ENGLISH
11
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
Important Introduction
Ð Battery Charger Ð
About the Battery Charger : continued
2
1
How to use the Charge / Operation switchRemoving
Charge
mode(RELEASE)Operation
mode
(LOCK)For charging
Move it to charge mode (see
ÒUsing with the Recharge-
able BatteryÓ page 12).
For operations
Move it to operation mode
when playing back or record-
ing (see ÒUsing with the AC...

Page 12

12
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
Power Source
Ð Using with the Rechargeable Battery Ð
Using with the Rechargeable Battery
ChargingWhen the rechargeable battery is used for the first time
or when you want to use it after a long period of disuse,
be sure to charge it fully.l
After the rechargeable battery is charged or used, it will get
slightly warm. This is normal.
l
When the portable MD is turned on or operating, the battery
will not be charged.
To the DC...

Page 13

DEUTSCH
FRAN‚AIS
ESPA„OL
SVENSKA
ITALIANO
NEDERLANDS
ENGLISH
13
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
Caution:lUse the specified battery AD-N55BT only. Do not charge
a battery (nickel-cadmium, alkaline, etc.) other than that
specified.lDo not remove the outer cover of the re-
chargeable battery. It may cause heat gen-
eration, fire, or explosion.lDo not dip the battery in water, do not dis-
pose of it in a fire, and do not take it apart.lIf the rechargeable battery...

Page 14

14
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)Using with the AC Adaptor
1
Place the portable MD to the battery
charger.
2
Move the Charge/Operation switch to
operation mode.
3
Plug the AC adaptor.
Caution:
lIf the Charge/Operation switch is not set to operation
mode, no operation is possible.
(See ÒHow to use the Charge/Operation switchÓ, page 11)
lWhen the unit is not in use for extended periods, re-
move the AC adaptor from the wall socket.
lInsert the plugs firmly....

Page 15

DEUTSCH
FRAN‚AIS
ESPA„OL
SVENSKA
ITALIANO
NEDERLANDS
ENGLISH
15
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
Use one commercially available alkaline battery (LR6, ÒAAÓ
size).
When using the alkaline batteries, make sure the recharge-
able battery is inserted.
Caution:
lDo not use rechargeable batteries (nickel-cadmium
battery etc.) in the battery case.
Power Source
Ð Using with the Alkaline Battery Ð
Using with the Alkaline Battery
1
Open the case cover.
2
Insert a alkaline...

Page 16

16
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
Preparation
Ð Hold Function Ð
Hold FunctionThe present operation condition can be kept even if other buttons are accidentally pressed in a place such
as a crowded train.
To cancel the hold mode:
Move the HOLD switch away from the safety posi-
tion (the opposite direction of the arrow).
lIf the hold function is active whilst the power is
turned off, the power cannot be turned on by
mistake and the battery will not be drained.l...

Page 17

17
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
Inserting a MiniDisc
1
Slide the OPEN lever to release the com-
partment door.
2
Lift it up.
3
Insert a MiniDisc as shown.
4
Close the compartment door.
Notes:lDo not place the MiniDisc under the holder.lIf any resistance is felt, do not force the MiniDisc into the
unit, as it may cause damage to the unit. If resistance is
felt, remove the MiniDisc and reload it.lThe lid can not be opened if ÒTOCÓ is displayed 
refer to
the...

Page 18

18
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
AUDIO OUTRIGHT LEFT
Connections
To the wall socket To the
DC IN 5V socket
Red : To Right
White : To Left
To the OPTICAL/
LINE IN socket
To a stereo system with ÒAUDIO OUTÓ or ÒLINE OUTÓ
sockets. (See left, Analogue connection.)
Note:
If the audio system has only one pair of sockets, they are
usually for input only and recording via this connection is not
possible.
AC 230-240V
50/60HzTo connect to a stereo system with ÒAUDIO...

Page 19

19
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
DIGITAL OUT
Preparation
Ð Connections Ð
Connections : continuedTo connect to a stereo system with a ÒDIGITAL OUTÓ or ÒOPTICAL OUTÓ socket
To a stereo system with a ÒDIGITAL OUTÓ socket.
(See left, Digital connection.)
Compared to analogue connection recording, it allows
high-quality recording.
Note:
Some audio systems do not have a DIGITAL OUT socket.
Check before connecting.To the OPTICAL/
LINE IN socket
AC 230-240V
50/60Hz...

Page 20

20
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)Recording
Basic Operation
Ð Recording Ð
As for the details, see page 16.
Before RecordingCancel the hold mode.
The portable MD does not work
whilst in hold mode. 
Start reading Sharp MD-MT877H PORTABLE MINIDISC RECORDER Operation Manual

Related Manuals for Sharp MD-MT877H PORTABLE MINIDISC RECORDER Operation Manual

All Sharp manuals