Sharp MD-MT877H PORTABLE MINIDISC RECORDER Operation Manual
Have a look at the manual Sharp MD-MT877H PORTABLE MINIDISC RECORDER Operation Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEUTSCH FRAN‚AIS ESPA„OL SVENSKA ITALIANO NEDERLANDS ENGLISH 11 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours) Important Introduction Ð Battery Charger Ð About the Battery Charger : continued 2 1 How to use the Charge / Operation switchRemoving Charge mode(RELEASE)Operation mode (LOCK)For charging Move it to charge mode (see ÒUsing with the Recharge- able BatteryÓ page 12). For operations Move it to operation mode when playing back or record- ing (see ÒUsing with the AC AdaptorÓ page 14). l Move the Charge / Operation switch to charge mode. Charge mode (RELEASE) Setting the battery charger and hanging the remote control.When the remote control is not used, hang it on the holder for your convenience.For use with the AC adaptor.When using the unit with AC adaptor, use it horizontally. Do not stand the unit.
12 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours) Power Source Ð Using with the Rechargeable Battery Ð Using with the Rechargeable Battery ChargingWhen the rechargeable battery is used for the first time or when you want to use it after a long period of disuse, be sure to charge it fully.l After the rechargeable battery is charged or used, it will get slightly warm. This is normal. l When the portable MD is turned on or operating, the battery will not be charged. To the DC IN 5V socketAC 230-240V 50/60Hz Charge mode Do not force the battery cover open too far. 1 Insert the rechargeable battery. 2 Move the Charge/Operation switch to charge mode. 3 Place the portable MD into the battery charger and connect the AC adaptor.
DEUTSCH FRAN‚AIS ESPA„OL SVENSKA ITALIANO NEDERLANDS ENGLISH 13 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours) Caution:lUse the specified battery AD-N55BT only. Do not charge a battery (nickel-cadmium, alkaline, etc.) other than that specified.lDo not remove the outer cover of the re- chargeable battery. It may cause heat gen- eration, fire, or explosion.lDo not dip the battery in water, do not dis- pose of it in a fire, and do not take it apart.lIf the rechargeable battery terminal is dirty, charging may not start. In such a case, wipe off the dirt with a dry cloth.lDo not disassemble the battery. About Power Source : continuedAbout the liquid crystal display (LCD)The condition of the portable MD will be shown on the LCD when inserting it into the battery charger. Display Conditions Scrolling lCharging. Turns offlThe charging is complete.lWhen the portable MD is not in- serted correctly to the battery charger, or Rechargeable terminal is dirty, it may not be possible to charge the battery. (Wipe the terminal by cot- ton swab.)lRefreshing (see page 41). The unit checks and, if necessary, discharge the rechargeable bat- tery to recharge it automatically. (At this time battery indicator is flashing.) About charging timeAfter about 3.5 hours have passed, Ò Ó will go out. The battery is charged up to 95% if it is completely discharged. Notes:lCharge the battery within the range of 5°C - 35°C (41°F - 95°F).lThe unit can be left in the charging state after it is com- pleted.lIf the MiniDisc unit is not to be used for some time, remove the battery. (The battery drains gradually even when the power is turned off.)lCarry the battery in the supplied case. Power Source Ð Using with the Rechargeable Battery Ð
14 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)Using with the AC Adaptor 1 Place the portable MD to the battery charger. 2 Move the Charge/Operation switch to operation mode. 3 Plug the AC adaptor. Caution: lIf the Charge/Operation switch is not set to operation mode, no operation is possible. (See ÒHow to use the Charge/Operation switchÓ, page 11) lWhen the unit is not in use for extended periods, re- move the AC adaptor from the wall socket. lInsert the plugs firmly. Note: When power failure occurs whilst playing back using the AC adaptor, disconnect the adaptor from the outlet. Other- wise, playback may start automatically when the power returns. To the DC IN 5V socket AC 230-240V 50/60Hz Operation mode Power Source Ð Using with the AC Adaptor Ð
DEUTSCH FRAN‚AIS ESPA„OL SVENSKA ITALIANO NEDERLANDS ENGLISH 15 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours) Use one commercially available alkaline battery (LR6, ÒAAÓ size). When using the alkaline batteries, make sure the recharge- able battery is inserted. Caution: lDo not use rechargeable batteries (nickel-cadmium battery etc.) in the battery case. Power Source Ð Using with the Alkaline Battery Ð Using with the Alkaline Battery 1 Open the case cover. 2 Insert a alkaline battery into the battery case. 3 Attach the battery case to the portable MD. 1 2Press Open Back of the portable MD RELEASE LOCK
16 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours) Preparation Ð Hold Function Ð Hold FunctionThe present operation condition can be kept even if other buttons are accidentally pressed in a place such as a crowded train. To cancel the hold mode: Move the HOLD switch away from the safety posi- tion (the opposite direction of the arrow). lIf the hold function is active whilst the power is turned off, the power cannot be turned on by mistake and the battery will not be drained.l If the alkaline batteries are inserted or the AC adaptor is connected, you can set this function even when the power is turned off. To cancel the hold modePress and hold down for 2 seconds or more whilst the unit is in the hold mode.l ÒHOLD OFFÓ will be shown Hold Release Press the ¥ n / ÐHOLD button for 2 seconds or more.Move the HOLD switch to the safety position (direction indicated by the arrow). Orange mark Remote control unit Main unit Hold
17 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours) Inserting a MiniDisc 1 Slide the OPEN lever to release the com- partment door. 2 Lift it up. 3 Insert a MiniDisc as shown. 4 Close the compartment door. Notes:lDo not place the MiniDisc under the holder.lIf any resistance is felt, do not force the MiniDisc into the unit, as it may cause damage to the unit. If resistance is felt, remove the MiniDisc and reload it.lThe lid can not be opened if ÒTOCÓ is displayed refer to the instruction on page 22. 3 4 12 Preparation Ð Inserting a MiniDisc Ð Recordable Recording preventedWhen you record on a MiniDisc, check that the erase prevention tab is set to the ÒrecordableÓ position.
18 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours) AUDIO OUTRIGHT LEFT Connections To the wall socket To the DC IN 5V socket Red : To Right White : To Left To the OPTICAL/ LINE IN socket To a stereo system with ÒAUDIO OUTÓ or ÒLINE OUTÓ sockets. (See left, Analogue connection.) Note: If the audio system has only one pair of sockets, they are usually for input only and recording via this connection is not possible. AC 230-240V 50/60HzTo connect to a stereo system with ÒAUDIO OUTÓ or ÒLINE OUTÓ socketsYou can record your favorite CDs or tapes to an MD. Preparation Ð Connections Ð
19 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours) DIGITAL OUT Preparation Ð Connections Ð Connections : continuedTo connect to a stereo system with a ÒDIGITAL OUTÓ or ÒOPTICAL OUTÓ socket To a stereo system with a ÒDIGITAL OUTÓ socket. (See left, Digital connection.) Compared to analogue connection recording, it allows high-quality recording. Note: Some audio systems do not have a DIGITAL OUT socket. Check before connecting.To the OPTICAL/ LINE IN socket AC 230-240V 50/60Hz To the wall socket To the DC IN 5V socket
20 Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)Recording Basic Operation Ð Recording Ð As for the details, see page 16. Before RecordingCancel the hold mode. The portable MD does not work whilst in hold mode.