Sharp Lc39le440m User Guide
Have a look at the manual Sharp Lc39le440m User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
10 Stereo reception in analogue cable TV channel mode You can see the each signal type you selected on the TV-screen when you press . When 2-channel sound reception is available, you can select your preferred audio with the AUDIO I/II. Each time you press AUDIO I/II, the sound channel will switch to the alternative channel available. NOTE • In case of bad reception, the stereo sound also can be disturbed. • The sound multiplex displayed when pressed is user selected sound. It may not the same one which is from the program being broadcasted Picture Format Picture Size The required picture format can be set by pressing the PICTURE SIZE button. Press PICTURE SIZE until the required format is displayed. You move through the following formats when you press the button: 4:3, 16:9, Cinema, Real. Other formats Press PICTURE SIZE until the desired size is reached. 4:3 The picture is displayed in 4:3 format with black bars to the right and left. 16:9 The width of the picture will be zoomed evenly. Cinema Use Cinema to increase a small 4:3 letterbox signal. 4:3 Letterbox picture increased to Cinema format. Real All images are displayed on the TV screen of 16:9 ratio without overscanning. Selectable picture mode TV - 4:3, 16:9, Cinema AV - 4:3, 16:9, Cinema Component (SD) - 4:3, 16:9, Cinema Component (HD) - 4:3, 16:9 HDMI (SD) - 4:3, 16:9, Cinema, Real HDMI (HD) - 4:3, 16:9, Real PC - 4:3, 16:9 Media (Movie) - 4:3, 16:9, Cinema Media (DivX) - 4:3, 16:9, Cinema, Real J3PI2101B_EN.indd 10J3PI2101B_EN.indd 105/27/2013 1:57:22 PM5/27/2013 1:57:22 PM
11 You can change the default settings to convenience use. Selected Items Setup hint CHANNEL See page 7, 8. PICTURE Picture Mode Dynamic Enhanced picture contrast and sharpness (factory-set) Standard Standard picture quality (factory-set) Mild Intended for bad-quality signals (factory-set) User Your personal preferences Contrast / Brightness / Color / Tint / Sharpness (available only when you selected “User” at Picture Mode)You can adjust the picture to your preference. • Tint is available in NTSC-signal mode or Component/HDMI- signal with 60Hz. Color Temperature Cool (Bluish) / Medium (Neutral) / Warm (Reddish) Noise Reduction Sometimes it is not possible to input a high-quality HD signal. The actual signal input is too small and noisy, e.g. a video fi lm in letterbox format, or a noisy analogue cable TV signal. This feature can slightly reduce interferences caused by the faulty input signal. Off / Low / Middle / High Backlight You can use the Backlight feature to adjust the screen brightness for improved picture clarity. SOUND Sound Mode You can change the sound mode setting. If you select “User”, you can change the setting of Treble and Bass and TV memorizes your setting. Standard / Music / Movie / Sports / User Treble / Bass / Balance (Treble / Bass are available only when you selected “User” at Sound Mode)You can adjust the sound quality to your preference. Auto Volume This will automatically adjust volume so each channel and input has the same average volume level. On / Off Surround The Surround-Sound feature processes the audio signal to expand the listening fi eld wider and deeper to create a ‘pseudo surround-sound’ from the TV’s speakers. The feature works with stereo signals from TV broadcast or AV input. On / Off Other convenience functions J3PI2101B_EN.indd 11J3PI2101B_EN.indd 115/27/2013 1:57:22 PM5/27/2013 1:57:22 PM
12 Selected Items Setup hint TIME Sleep Timer Sleep Timer switches the TV to standby after a defi ned period of time. To cancel the Sleep Timer, set to “Off”. Off/10/20/30/60/90/120/180/240min Auto Sleep When the Set and Remote key operation are not operated with specifi ed period by this setting(3/4/5 H), the power status is changed to stand by mode automatically. Off/3/4/5 H OSD Timer OSD is cleared automatically as per this setting. • “CH LIST” OSD will disappear after 10 seconds in spite of this setting. • The OSD which is linked with the OSD Timer setup is limited to the OSDs for the overall Menu and the Input Select. 5/10/15/20/25/30 S OPTION OSD Language See page 8. TT Language See page 9. Aspect Ratio See page 10. Blue Screen On: You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent. On / Off Key Lock You can lock the panel buttons to prevent your settings from being changed accidentally (by children, for example). When the Key Lock is in On, all control buttons on the TV panel do not operate. On / Off First Time Installation See page 7. Reset Press or ENTER to enter the Reset to default screen. Press to select “Yes”. Reset the TV function will now begin.• When you proceed the Reset function and all item in the PICTURE, SOUND, TIME, OPTION will back to factory value. At this time, TV channel preset will not reset. Software Update (USB) Upgrade the software with the USB drive , check with your SHARP authorized Service Center. DivX Reg. Code In order to play DivX ® VOD (Video On Demand) content on this unit, you fi rst need to register the unit with your DivX® VOD content provider. You do this by generating a DivX® VOD registration code, which you submit to your provider. Deactivation You can fi nd the deregistration code (8-10 digit). Please use this code to deactivate on DivX ® website. SCREEN Auto Adjust “Horizontal Pos.”, “Vertical Pos.”, “Clock” and “Phase” are adjusted automatically as per the input PC video signal. • When PC-input mode was selected and a PC-signal was input, Auto Adjust will be performed automatically. Horizontal Pos. To adjust the horizontal placing of the image. Vertical Pos. To adjust the vertical placing of the image. Clock Eliminates the vertical (Clock) interfering lines. Phase Eliminates the horizontal (Phase) interfering lines. Other convenience functions (Continued) J3PI2101B_EN.indd 12J3PI2101B_EN.indd 125/27/2013 1:57:22 PM5/27/2013 1:57:22 PM
13 Media Operation You can enjoy viewing pictures and text fi les, playing music and movie fi les from your USB storage device. 1Connect the USB storage device into the USB Input terminal. 2Press MEDIA to display the Media Menu. NOTE • Do not disconnect a USB storage device while it is being accessed. Doing so can damage the device or the fi les stored on the device. You can safely connect or disconnect the USB storage device when the TV is not in MEDIA mode. • Back up all the data in the USB storage device in case if data was lost due to unexpected accident. We do not assume any liability for the losses by misuse or malfunction. • Not all USB storage devices are compatible with this TV. • The character that exceeds the display area is not displayed. • Do not use USB extension cable. Media Browser Media Selection PHOTO MUSIC MOVIE TEXT File Selection DeleteMUSIC 2/2 C:\MP3 Music01.mp3 Music02.mp3 Music05.mp3 Music06.mp3 Music09.mp3 Music10.mp3Music03.mp3 example.jpg Music07.mp3 example.jpg Music11.mp3 Music12.mp3Album: Title: Music12.mp3 Bit Rate: 224K Artist: xxxx.. Sampling: 44K Ye a r : Size: 5129 KBytes NOTE • The content will change in accordance with each media setting screen. Information window Playback fi les 1Press c/ d to select PHOTO, MUSIC, MOVIE or TEXT at Media Selection and press ENTER. 2Press c/d to select “C”, then press ENTER. 3Select folder or fi le with a / b/ c / d, and then start the playback with ENTER. You can playback the files with the following remote control buttons. Button Action c / dPress to rotate the picture. ENTERPress to start the playback. Press to open the folder. Press to open the operation window. ▶ ▌▌Press to start the playback or slideshow. Press to pause the playback. ■Press to stop the playback. During the playback, press to select the next fi le. During the playback, press to select the previous fi le. During the playback, press to search forward. During the playback, press to search backward. NOTE • When playing a movie fi le that was created by the supported video codec with nonsupported audio codec, the video fi le will playback with no sound. (see page 14) J3PI2101B_EN.indd 13J3PI2101B_EN.indd 135/27/2013 1:57:22 PM5/27/2013 1:57:22 PM
14 Playable File Types Photo File TypeExtension NameDetail Spec JPEG .jpg, .jpegMax Resolution: 15360×8640 (Base- line), 1024x768 (Progressive) BMP .bmpMax Resolution: 9600×6400 Pixel Depth: 1/4/8/16/24/32 bpp PNG .png Max Resolution: 9600×6400 (Non- Interlaced), 1200x800 (Interlaced) Music File TypeExtension NameDetail Spec MP3 .mp3 Sample Rate: 32K~48KHz Bit Rate: 32K~320Kbps WMA .wma AAC .aac, .m4a Movie File TypeExtension NameDetail Spec Motion JPG .avi Max Resolution and Frame Rate: 720p@30fps Max Data Rate: 10 Mbps Audio Codec: MP3, MP2, PCM/ ADPCM, AC-3, AAC, WMA Xvid, MPEG-2/4 SP/ASP, H.264 Max Resolution and Frame Rate: 720p@30fps Max Data Rate: 20 Mbps Audio Codec: MP3, MP2, PCM/AD- PCM, AC-3, AAC, WMAMPEG-2/4 SP/ASP, H.264.mp4, .mov MPEG-2 .ts, .trp MPEG-4 SP/ASP, H.264.mkv MPEG-1/2 .mpg DivX .div, .divx, .avi, .mp4 Max Resolution: 720×576 Max Data Rate: 20 Mbps Audio Codec: MP3, MP2, PCM/AD- PCM, AC-3, AAC MPEG-2 .vobMax Resolution:720×576 Max Data Rate: 20 Mbps Audio Codec: MP2, AC-3 Remark: please note that some movie fi les can not be displayed due to the multi codecs issue even at the same format. Text File TypeExtension NameDetail Spec Text .txt Less than 1M Bytes Encoding: ANSI, Unicode (UTF-8) Line break: CR+LF File System Standard Hi Speed FS, FAT32, FAT16, NTFS (NTFS compressed fi le is not supported) Operation Window 1Press or ENTER during playback the fi le.Operation window will appear at bottom of the TV. 2Press c / d to select the desired command, then press ENTER to execute. Details of operation commands Icon Operation ▐▐ ▶Pause/Playback Skip fi le to forward or reverse direction. ■Stop. Repeat playback. Press ENTER repeatedly to select desired repeat option. Play background music when you view photo or text. It works only when the music and the photo (or text) in the same folder. Show the playlist.Press a / b and ENTER to select the playback Show the fi le information. Rotate the image. Zoom in / Zoom out. Move the frame from the center position. • Available only for Zoom in mode. Fast Forward / Review playback. Show the next / previous page in text view mode. Turn off the sound and turn on when press again. Direct jump by desired time. Select start point, then select end point. Repeat material between two selected points. Slow-motion Playback. One frame is advanced each time select this command. Select picture format. (fi le MOVIE only) Display the subtitles You can select the language when playing back a video recorded with multilingual subtitles. Press or ENTER then press c / d to select then press ENTER. Press a / b to select “Subtitle” then press c / d to select deisred subtitle. J3PI2101B_EN.indd 14J3PI2101B_EN.indd 145/27/2013 1:57:23 PM5/27/2013 1:57:23 PM
15 Appendix Troubleshooting The problems described below are not always caused by malfunctions. Check the TV again before having the TV serviced. Problem Possible Solution • No power. • When the a (POWER) switch does not work, remove the power plug and insert it again, and then press a (POWER) on the TV after waiting for more than fi ve seconds. • Is the AC cord disconnected? • Has the power been turned on? (See page 6.) • Unit cannot be operated. • External infl uences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the unit after fi rst turning the power off the TV or unplugging the AC cord and re-plugging it in after 1 or 2 minutes. • Remote control unit does not operate.• Are batteries inserted with polarity (+, –) aligned? (See page 5.) • Are batteries worn out? (Replace with new batteries.) • Are you using it under strong or fl uorescent lighting? • Is a fl uorescent light shining on the remote control sensor? • Picture is cut off. • Are screen mode adjustments such as picture size made correctly? (See page 10.) • Strange colour, light colour, or dark, or colour misalignment.• Adjust the picture tone. (See page 11.) • Is the room too bright? The picture may look dark in a room that is too bright. • Check the colour system setting. (See page 8.) • Power is suddenly turned off. • The unit’s internal temperature has increased. • Remove any objects blocking the vent or clean. • Check the Auto Sleep setting. (See page 12.) • Is the sleep timer set? (See page 12.) • No picture. • Is the connection to external equipment correct? (See page 4.) • Is the Picture Mode adjustment correct? (See page 11.) • Is the antenna connected properly? (See page 3.) • No sound. • Is the volume too low? (See page 5.) • The TV sometimes makes a cracking sound.• This is not a malfunction. This happens when the cabinet slightly expands and contracts according to changes in temperature. This does not affect the TV’s performance. Cautions regarding use in high and low temperature environments• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. • Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction. Storage temperature: f20°C to e60°C. J3PI2101B_EN.indd 15J3PI2101B_EN.indd 155/27/2013 1:57:24 PM5/27/2013 1:57:24 PM
16 Specifi cations Item Model LC-29LE440M LC-39LE440M LCD panel with LED backlight 28.5” (723.1 mm) Advanced Super View & BLACK TFT LCD38.57” (979.7 mm) Advanced Super View & BLACK TFT LCD Resolution 1,049,088 pixels (1366 g 768)2,073,600 pixels (1920 g 1080) Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV FunctionTV-Standard PAL: B/G, D/K, I SECAM: B/G, D/K, NTSC3.58 : M Receiving ChannelVHF/UHF 44.25 — 863.25 MHz TV-Tuning System Analog 199 carrier STEREO/BILINGUAL NICAM/A2 Dual/US Stereo Audio amplifi er 9 W g 2 Terminals Antenna UHF/VHF 75 q AV VIDEO RCA pin(AV input) VIDEO RCA pin(AV output) COMPONENT Y :Composite Input ,RCA g2 (Pb,Pr Audio Input 1 Alternative) HDMI 1 HDMI in with HDCP, (PC Monitor Audio Input Alternative) HDMI 2 HDMI in with HDCP PC 15 pin mini D-sub, AUDIO in (Ø 3.5 mm jack) USB USB for multimedia player function (photo, music, movie and text) Headphone Ø 3.5 mm jack OSD language English/French/Portuguese/Arabic/Persian/Simplifi ed Chinese/Thai/Vietnamese/Indonesian/Russian/Malay/Spanish Power Requirement AC 110 — 240 V, 50/60 Hz Power Consumption 53 W (1 W Standby) 63 W (1 W Standby) Dimensionswithout stand (mm) 662.3 (W) g 403.0 (H) g 67.7 (D) 888.0 (W) g 531.4 (H) g 68.8 (D) with stand (mm) 662.3 (W) g 428.6 (H) g 170.0 (D) 888.0 (W) g 557.3 (H) g 197.8 (D) Weight without stand (with stand) 4.7 kg (5.3 kg) 9.0 kg (9.5 kg) Operating Temperature 0°C — +40°C • As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production units. There may be some deviations from these values in individual units. CAUTION • Installing the Liquid Crystal Television requires special skill that should only be performed by qualifi ed service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury. • Carefully read the instructions that come with the bracket before beginning work. • The TV screen may fail to display component input signals from the following source equipment: - Source equipment that intermix NTSC and PAL formats. - Output from an old VHS deck. - Devices such as old game consoles with signal outputs other than NTSC/PAL format. This product does not support the direct input of the aforementioned source equipment. When connecting the above mentioned source equipment, run the equipment’s signal output through correction devices such as a Time Base Corrector (TBC) or Frame Synchronizer (FS). J3PI2101B_EN.indd 16J3PI2101B_EN.indd 165/27/2013 1:57:24 PM5/27/2013 1:57:24 PM
LC-29LE440M LC-39LE440M Unit:mm J3PI2101B_EN.indd 17J3PI2101B_EN.indd 175/27/2013 1:57:24 PM5/27/2013 1:57:24 PM
J3PI2101B SH13/05 N J3PI2101B_Cover.indd 3J3PI2101B_Cover.indd 35/27/2013 1:57:29 PM5/27/2013 1:57:29 PM