Sharp Lc39le440m User Guide

							LC-29LE440M
LC-39LE440M
LCD COLOUR TELEVISION
OPERATION MANUAL
Only for LC-39LE440M
Printed in Thailand
J3PI2101B_Cover.indd   1J3PI2101B_Cover.indd   15/27/2013   1:57:29 PM5/27/2013   1:57:29 PM 
						

							 1
Supplied accessories
Remote control unit
“AAA” size battery (
g2)Antenna adaptor
(For Philippine model only)
Operation manual Stand base Screws
Contents
Page
Supplied accessories ..............................................1
Contents ...................................................................1
Dear SHARP customer ............................................2
Important Safety Precautions ................................2
Trademarks ..............................................................2
Setting the TV ..........................................................3
Attaching the stand .................................................3
Connecting external devices ..................................4
Remote control unit ................................................5
Part names ...............................................................6
Auto setup ................................................................7
Quick guide for Menu operation ............................7
Selecting the input source ......................................7
On-screen Language Selection............................. 8
Channel Setup ........................................................ 8Page
Programme Edit ...................................................... 8
Basic Operation ...................................................... 8
Teletext .................................................................... 9
Stereo reception in analogue cable TV 
channel mode ....................................................... 10
Picture Format ...................................................... 10
Other convenience functions .............................. 11
Media Operation ................................................... 13
Media Browser ...................................................... 13
Playback fi les ........................................................ 13
Operation Window ................................................ 14
Playable File Types ............................................... 14
Appendix ............................................................... 15
Specifi cations ....................................................... 16
J3PI2101B_EN.indd   1J3PI2101B_EN.indd   15/27/2013   1:57:14 PM5/27/2013   1:57:14 PM 
						

							 2
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of 
trouble-free operation of your product, please read the Important Safety Precautions carefully before 
using this product.
Important Safety Precautions
• Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the product. 
Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the product.
• Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming 
pool and in a wet basement.
• Do not place vases or any other water-fi lled containers on this product. The water may spill onto the product causing fi re  or 
electric shock.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting 
in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended 
by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s 
instructions. Use only the mounting hardware recommended by the manufacturer.
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven 
fl oor surface can cause the product to fall from the cart.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and 
openings since insuffi cient ventilation can cause overheating and/or shorten the life of the product. Do not place the product 
on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in 
installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or 
the manufacturer’s instructions are followed.
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a 
sharp object. If the LCD panel is broken, be careful not to be injured by broken glass.
• Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating 
products (including amplifi ers).
• To  prevent fi re, never place any type of candle or naked fl ames on the top or near the TV set.
• To  prevent fi re or shock hazard, do not place the AC power cord under the TV set or other heavy items.
• Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take special 
care near children and pets.
• The LCD panel is a very high technology product with 1,049,088 (only for LC-29LE440M)/2,073,600 (only for LC-39LE440M) 
pixels, giving you fi ne picture details.
  Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fi xed point of blue, 
green or red. This is within product specifi cations and does not constitute a fault.
• Headphones—Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
• Do not display a still picture for a long time, as this could cause an after image to remain.
 Precautions when transporting the TV
• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry the 
TV by two people holding it with two hands — one hand on each side of the TV.
• Install the product on the place where the AC cord can be unplugged easily from the AC outlet.
Trademarks
• The terms HDMI and HDMI High-Defi nition Multimedia Interface, and the HDMI Logo are trademarks or registered 
trademarks of HDMI Licensing LLC in the United States and other countries.
• 
DivX®, DivX Certifi ed® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.• DivX  Certifi ed® to play DivX® video, including premium content.
• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an offi cial 
DivX Certifi ed® device that plays DivX video. Visit divx.com for more information and software tools to convert your fi les  into 
DivX videos. 
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certifi ed
® device must be registered in order to play purchased DivX Video-
on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to 
vod.divx.com for more information on how to complete your registration.
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
• This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of 
this product is prohibited without a license from Microsoft.
• THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND 
NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL 
STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER 
ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER 
LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR 
ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND 
COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM.
• THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF 
A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN 
COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY 
A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED 
TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL 
INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM.
• All other trademarks are property of their respective owners.
J3PI2101B_EN.indd   2J3PI2101B_EN.indd   25/27/2013   1:57:15 PM5/27/2013   1:57:15 PM 
						

							 3
Setting the TV
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna.
orVHF/UHF 
antenna 300-ohm twin-
lead fl at  feeder 
(not supplied) 75-ohm 
impedance 
converter 
(not supplied)
Antenna adaptor
(supplied for Philippine only)75-ohm coaxial 
cable (round cable) 
(not supplied)
To antenna terminal
For Philippine model only
If your outdoor antenna uses a 75-ohm coaxial cable with 
a standard DIN45325 plug (IEC 169-2), plug it into the 
antenna jack at the rear of the set.If your outdoor antenna uses a 75-ohm coaxial cable with F 
type plug, plug it into the antenna jack at the rear of the set.
CAUTION 
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE 
AC CORD CONNECTED.
• The illustrations used throughout this manual are based on LC-39LE440M.
NOTE 
• The method of connection differs depending on a type of wires for aerials that you use. Attach an optional conversion plug (for 
the Philippines) compatible with the type of wires for arials that you use to the installation device. Make sure to power off the 
device for safety when you connect to a wire for aerials.
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
1Confi rm the screws supplied with the TV.
LC-29LE440M Screw (4 
m 16 mm): 
m 4, (4 
m 10 mm): 
m 1
LC-39LE440M Screw (4 
m 10 mm): 
m 4, (4 
m 25 mm): 
m 3
2Attach the stand base, insert and tighten the screws into the holes on the bottom of the stand base.
NOTE 
• To detach the stand, perform the steps in reverse order.
LC-29LE440M
4x16 mm 4x10 mm
LC-39LE440M
4x25 mm
4x10 mm
If your outdoor antenna uses a 300-ohm twin-lead fl at 
feeder (F type), connect a 300-ohm to 75-ohm impedance 
converter and plug it into the antenna jack at the rear of the 
set. If you use M type plug, plug it into the antenna jack at 
the rear of the set directly.
VHF/UHF 
antenna
J3PI2101B_EN.indd   3J3PI2101B_EN.indd   35/27/2013   1:57:15 PM5/27/2013   1:57:15 PM 
						

							 4
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player 
and PC. To view external source images, select the input source from INPUT SELECT on the remote control unit or /ENTER on the TV.
CAUTION 
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, PC or 
other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected using 
the composite terminals.
When using composite A/V cable 
(commercially available)
AUDIOL
R
VIDEOVCR/Game 
console/
Camcorder
Connecting a DVD player
You can use the Component/HDMI1/HDMI2 terminals when connecting to a DVD player and other audiovisual 
equipment.
When using HDMI-certifi ed cable 
(commercially available)When using component cable 
(commercially available)
L
R
Y
PB(CB)
PR(CR)
DVD player DVD player
Connecting a PC
You can use the PC Monitor terminal when connecting to a PC.
ANALOG
RGB
AUDIO
PC
• The illustrations used throughout this manual are based on LC-39LE440M.PC compatibility chart
ResolutionHorizontal 
FrequencyVertical 
FrequencyVESA 
Standard
VGA
640 
g 48031.5 kHz 60 Hz
✓
SVGA
800 
g 60037.9 kHz 60 Hz
✓
XGA
1024 
g 76848.4 kHz 60 Hz
✓
WXGA
1280 
g 76847.7 kHz 60 Hz
✓
WXGA
1280 
g 72045.0 kHz 60 Hz
✓
WXGA
1360 
g 76847.7 kHz 60 Hz
✓
SXGA
1280 
g 102464.0 kHz  60 Hz
✓
WXGA+1440 g 90055.9 kHz  60 Hz
✓FULL HD1920 g 108067.5 kHz 60 Hz
✓
VGA and XGA are registered trademarks of International Business 
Machines Corp.
J3PI2101B_EN.indd   4J3PI2101B_EN.indd   45/27/2013   1:57:16 PM5/27/2013   1:57:16 PM 
						

							 5
Remote control unit
1a (POWER)
Enter standby mode or turn on the power
2
 (info)
Display program position number
3 INPUT SELECT
Select an input source
4 PICTURE SIZE
Select picture format
5 0 – 9
Select channel
Select Teletext page
6 AUDIO I/II
Select between the available broadcast audio
7 MEDIA
To enter Media Browser
Inserting the batteries
Before using the TV for the fi rst time, insert two “AAA” size batteries (supplied). When the batteries become 
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
1Open the battery cover.2Insert the two supplied “AAA” size batteries.3Close the battery cover.
• Place batteries with their terminals corresponding to the 
(
e) and (
f) indications in the battery compartment.
CAUTION 
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fi re or the like.
• If the remote control will not be used for a long time, remove the batteries.
• Do not subject the remote control unit to shock. In addition, do not soak the remote control unit with liquids or place it
  in an area with high humidity.
• Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the unit.
11
2113
17
20 18
16 12
147
9 5
8
10612 3 4
15
19
8 MENU
Activate the menu / In menu, return 1 step
9 RETURN
Exit menu / In Media browser, return 1 step
10a
/
b/c
/d
 (Cursor)
Cursor buttons
11 ENTER/CH LIST
Memorize
Channel List
12¬
 (MUTE)
Turn the sound on/off
13
m
 (TELETEXT)
Teletext ON / Text mix / OFF
14
 (+/-)
Volume
15
FREEZE / 3
 (HOLD)
Still picture
Hold the text page
16
/  (SUBPAGE)
Switches between the present channel and the last 
selected channel
Sub page selection
17 P (+/-)
Change the TV channel or Teletext page up or down
18
k
 (Reveal hidden or TELETEXT)
Reveal quiz page answers
19
v
 (TOP/BOTTOM/FULL)
Teletext enlargement
20
H
 / 
 
/ S
 / J
 / K
/ L
Control buttons for USB-playback
21
Fastext/TOPtext buttons
J3PI2101B_EN.indd   5J3PI2101B_EN.indd   55/27/2013   1:57:20 PM5/27/2013   1:57:20 PM 
						

							 6
Part names
TV (Front)
Remote control sensor
Power Indicator
POWER indicator
Lighted (Red) The TV is off (standby mode).
Lighted (Green) The TV is on.
TV (Rear/Location of controls)
1
2
3
4
5
6
7
8
9
10
1113
12
Warning: When 
mounting the TV on a 
wall, NEVER remove the 
stand neck.
stand neck1 
/ENTER button
2 P (Channel) 
/// buttons
3 
 (Volume) +/–// buttons, 
MENU button
 Press hold 
 (Volume) +/– 
simultaneously about 1 second the 
menu will be appear.
4 
a
 (Power) button
5 HEADPHONE jack (Ø 3.5 mm)
  •  The speakers do not output 
volume when headphones are 
plugged in.
6 USB terminal*
7 HDMI 1 Input terminal
  •  AUDIO PC/HDMI1/HDMI2 input 
alternative
8 VIDEO Output terminal
9 COMPONENT/AV VIDEO Input 
terminals
  • Audio input alternative
10 ANT. (Antenna) input terminal 
11 HDMI 2 Input terminal
12 PC Monitor Input
  • Audio input mini pin jack
13 Bracket holes Fix a wall mounting 
bracket (not supplied) here. Before 
wall-mounting, please check 
carefully the location of the TV’s 
mounting-holes.
*  USB terminal use for USB Media Player. (See page 13.)
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• The illustrations used throughout this manual are based on LC-39LE440M.
J3PI2101B_EN.indd   6J3PI2101B_EN.indd   65/27/2013   1:57:21 PM5/27/2013   1:57:21 PM 
						

							 7
Auto setup
Your television has an Automatic Tuning System which 
makes tuning in your television easy. This Automatic 
tuning System scans the entire reception range in your 
area and automatically stores all available analogue 
channels of suitable signal strength in the correct 
order.
Preparation:
Press a
 (Power).
1First Time Installation menu will appear.
Press 
c/
d to select desired language.
First Time Installation
Enter Return
ENTERRETURN
English
Off OSD Language
Auto Sleep
2If you cancel Auto Sleep (see page 12), 
press 
a/
b/
c/
d to select “Off”. Then press 
ENTER.
First Time Installation
Enter Return
ENTERRETURN
English
Off OSD Language
Auto Sleep
3TV will search for TV-channels. Connect your 
antenna now.
The tuning’s progress will be displayed in percent 
for confi rmation.
NOTE 
• Please be patient - the Auto Tuning 
process can take several minutes to 
complete.
4When the display reads 100%, normal TV-screen 
will appear.
NOTE 
• To cancel the auto tuning, press RETURN, 
then press c to select “Yes” during the process.
THE AUTOMATIC TUNING PROCESS WILL ONLY 
START BY ITSELF THE FIRST TIME YOU SWITCH 
THE SET ON. HOWEVER YOU CAN RESTART 
THIS PROCESS VIA THE MENU SYSTEM (see 
page 12).
• If you could not set up a correct language in this auto setup 
process, you will be able to make your preferred language 
selection as illustrated in page 8 (On-screen Language 
Selection).
Quick guide for Menu 
operation
Call Menu and for example: Select “Auto Tuning”.
1Press INPUT SELECT. Select TV, then press 
ENTER. Press MENU.
2Press 
c/
d to select “CHANNEL”, then press 
b or ENTER.
Auto Tuning
CHANNEL ATV Manual Tuning
Programme Edit
3Press 
a/
b to select “Auto Tuning”, then press 
d or ENTER.
CHANNEL ATV Manual Tuning
Programme EditAuto Tuning
Press 
c/
d to select “Yes” to confi rm or choose 
the “No” to return to the menu screen.
... on the following pages the MENU can be called in 
the same way as here.
4Press RETURN to exit the menu.
NOTE 
• The Menu screen disappears automatically after a defi ned 
period of time with “OSD Timer”. (see page 12)
Selecting the input source
Press INPUT SELECT to view a signal from another 
device connected to your TV, such as a VCR or DVD 
player. You can select each input source depending on 
which input jacks you used to connect your devices.
To select the video input source, press 
a/
b, then 
press ENTER.
J3PI2101B_EN.indd   7J3PI2101B_EN.indd   75/27/2013   1:57:21 PM5/27/2013   1:57:21 PM 
						

							 8
On-screen Language 
Selection
1Press MENU (unless you have already selected 
when the set was fi rst switched on). Then press 
c/
d to select “OPTION”, then press 
b or 
ENTER.
OSD Language
West
16:9
On English
TT Language
Aspect Ratio
Blue Screen
Key Lock Off OPTION
First Time Installation
Reset
Software Update(USB)
DivX Reg. Code
Deactivation
2Press 
a/
b to select “OSD Language”, then 
press 
c/
d to select the desired language.
3Press RETURN to exit the menu.
Channel Setup
Press MENU. Select “CHANNEL/ATV Manual Tuning”, 
then press 
d or ENTER.
Press 
a/
b to select desired item, then press 
c/
d to setting.
ATV Manual Tuning
Current CH 3+
Color System NTSC
Sound System M
Fine-Tune 67.25 MHz
AFC On
Search
MenuMENU
Current CH: Set the channel number.
Color System: Select the color system. Color System 
has already been preset to automatic. Do not change 
anything here. Any changes can cause picture or 
sound disruption.
Sound System: Select the sound system. The correct 
sound system is already installed. Any changes can 
cause sound disruption.
Fine-Tune: Adjust the frequency of the channel fi nely.
AFC: Automatic Fine Tuning.
Search: Press 
c to search down from the current 
frequency, and press 
d to search up.
Press RETURN to exit the menu.
Programme Edit
You can preset your favorite channel (Channel List).
Press MENU. Select “CHANNEL/Programme Edit”, 
then press 
d or ENTER.
Programme Edit
AT V
AT V
AT V
AT V
AT V
AT V
AT V
AT V
AT V
AT V
2 1ABC
3
4
5
6
7
8
9
10
Delete
Rename Move Skip
EnterENTERMenuMENU
Delete (red button): You can delete channel.
Rename (green button): You can input or change the 
name of a channel on the cursor screen with 
a/
b/
c/
d, ENTER and Green buttons.
Move (yellow button): Press 
a/
b to select the 
position that you want to swap the channel with, then 
press Yellow button.
Skip (blue button): 
 mark will appear.
Basic Operation
Channel selection
With the Numbered buttons (0-9).
Example:
•  No. 2: Press 2.
•  No. 29: Press 2 and within 2 seconds, press 9.
•  No. 929: Press 9, 2, 9 same as above.
Press P +/- to change up or down a channel. This 
takes approx. 2 seconds. If the auto search only stored 
5 stations, only these 5 will appear. Skipped channels 
will not appear.
NOTE 
• As TV CH is called up when you input and set the fi rst  digit, 
CH inputs of over two digits cannot be made with external 
input.
Channel List
The Channel List shows a list of all receivable 
programmes.
Press CH LIST to display the Channel List.
Press 
a/
b then press ENTER to select the desired 
channel.
Press CH LIST to display the selected channel.
NOTE 
• To display the programmes on the channel list, it is 
necessary to input the programme name in “Programme 
Edit” mode.
J3PI2101B_EN.indd   8J3PI2101B_EN.indd   85/27/2013   1:57:22 PM5/27/2013   1:57:22 PM 
						

							 9
Information display
Press . The program information will appear for 
approx. 5 seconds.
Quick View
 button allows you to go back to the last selected 
TV channel.
When you press 
 during external input mode, TV 
switches to the last channel.
Also, when you press 
 during TV, you will not 
return to external input mode, but only switch channels 
between last channel and current channel.
MUTE
Press . The sound will be cut off.
The MUTE can be released by pressing  again or  (Volume) + or -.
Still picture
Press FREEZE to make a still picture. To cancel the 
still picture, press FREEZE again.
NOTE 
• The still picture function is available only for TV and AV-input 
mode.
• During still picture mode, Aspect Ratio feature is not 
available. (If you press PICTURE SIZE, still picture mode 
will be canceled.)
• During the playback of a movie fi le in MEDIA mode, still 
picture function is not available.
NOTE 
• During TV or external input mode, if there is no signal 
reception, the TV will change to standby after approx. 15 
minutes (PC mode: 5 minutes).
• Some functions are activated and de-activated with the 
same key. Others require RETURN key for de-activating.
Teletext
Teletext is sent page by page. This unit is able to 
automatically store up to 899 pages, but they can only 
be accessed once they have been stored. This can 
take a few moments.
TT Language menu allows the installation of the 
teletext language.
The languages displayed are only those supported by 
the channel.
Fastext/TOPtext
The Fastext/TOPtext is teletext with a special directory.
On the lower part of the screen there are four different 
coloured fi elds (red, green, yellow and blue). These 
fi elds lead directly to the pages shown within. The 
coloured buttons on the remote control correspond 
to the coloured fi elds. Press the appropriate coloured 
button in order to activate the desired colour fi eld.
Switch on / off Teletext
Teletext is not transmitted by all channels.
Select a channel that shows teletext.
Press 
. You will now see a teletext page. 
(If “100” is shown without any text information, it may 
mean that the channel you have selected does not 
support teletext.)
Press 
 again. Teletext and TV picture are shown 
simultaneously.
Press 
 again in order to switch off teletext.
Press  again in order to switch on teletext again. The 
last page which was stored is now shown.
NOTE 
• You cannot select any other channels as long as teletext is 
switched on. Switch teletext off when you want to switch 
over to another channel.
Select Page
Press P +/- until the page you desire appears. Or ... 
enter the requested page number by using the 10 
Number Buttons.
And if you mistype something, just enter the complete 
3-digit wrong page number then enter the desired 
number again. Or ... press one of the coloured teletext 
buttons so that a page from Fastext/TOPtext is shown.
Hold Pages
Some pages are divided up into subpages by the 
channel.
Subpages are automatically shown in turn, as they are 
transmitted. In order to hold the page, press 
. Press  again in order to display the next subpage.
Directly Select Subpages
You can directly select the subpages if required. You 
may use one of two operations.
1. Press 
 in order to select subpage 2. 0 0 0 0 
is shown. Enter 0 0 0 2. It can take a minute before 
subpage 0002 appears. Press 
 again in order 
to switch off the subpage feature.
Or:
2. Wait a few seconds, and the right now available 
subpages will be shown in the bottom line. Select 
your page with 
c/
d. 
Enlargement
In order to enlarge the display, press .
Either the upper or lower half of the screen is enlarged.
Each time you press 
 you switch between the 
display of the upper or lower half of the screen or the 
full picture.
Answering Quiz Questions
Some pages contain quiz questions with concealed 
answers.
Press 
 in order to show the answers.
J3PI2101B_EN.indd   9J3PI2101B_EN.indd   95/27/2013   1:57:22 PM5/27/2013   1:57:22 PM