Sharp Lc39le440m User Guide

LC-29LE440M
LC-39LE440M
LCD COLOUR TELEVISION
OPERATION MANUAL
Only for LC-39LE440M
Printed in Thailand
J3PI2101B_Cover.indd   1J3PI2101B_Cover.indd   15/27/2013   1:57:29 PM5/27/2013   1:57:29 PM 

 1
Supplied accessories
Remote control unit
“AAA” size battery (
g2)Antenna adaptor
(For Philippine model only)
Operation manual Stand base Screws
Contents
Page
Supplied accessories ..............................................1
Contents ...................................................................1
Dear SHARP customer ............................................2
Important Safety Precautions ................................2
Trademarks...

 2
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of 
trouble-free operation of your product, please read the Important Safety Precautions carefully before 
using this product.
Important Safety Precautions
• Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the product. 
Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the...

 3
Setting the TV
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna.
orVHF/UHF 
antenna 300-ohm twin-
lead fl at  feeder 
(not supplied) 75-ohm 
impedance 
converter 
(not supplied)
Antenna adaptor
(supplied for Philippine only)75-ohm coaxial 
cable (round cable) 
(not supplied)
To antenna terminal
For Philippine model only
If your outdoor antenna uses a 75-ohm coaxial cable with 
a standard DIN45325 plug (IEC 169-2), plug it into the 
antenna jack at the rear of the set.If...

 4
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player 
and PC. To view external source images, select the input source from INPUT SELECT on the remote control unit or /ENTER on the TV.
CAUTION 
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, PC or 
other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully...

 5
Remote control unit
1a (POWER)
Enter standby mode or turn on the power
2
 (info)
Display program position number
3 INPUT SELECT
Select an input source
4 PICTURE SIZE
Select picture format
5 0 – 9
Select channel
Select Teletext page
6 AUDIO I/II
Select between the available broadcast audio
7 MEDIA
To enter Media Browser
Inserting the batteries
Before using the TV for the fi rst time, insert two “AAA” size batteries (supplied). When the batteries become 
depleted and the remote control fails to operate,...

 6
Part names
TV (Front)
Remote control sensor
Power Indicator
POWER indicator
Lighted (Red) The TV is off (standby mode).
Lighted (Green) The TV is on.
TV (Rear/Location of controls)
1
2
3
4
5
6
7
8
9
10
1113
12
Warning: When 
mounting the TV on a 
wall, NEVER remove the 
stand neck.
stand neck1 
/ENTER button
2 P (Channel) 
/// buttons
3 
 (Volume) +/–// buttons, 
MENU button
 Press hold 
 (Volume) +/– 
simultaneously about 1 second the 
menu will be appear.
4 
a
 (Power) button
5 HEADPHONE jack (Ø 3.5...

 7
Auto setup
Your television has an Automatic Tuning System which 
makes tuning in your television easy. This Automatic 
tuning System scans the entire reception range in your 
area and automatically stores all available analogue 
channels of suitable signal strength in the correct 
order.
Preparation:
Press a
 (Power).
1First Time Installation menu will appear.
Press 
c/
d to select desired language.
First Time Installation
Enter Return
ENTERRETURN
English
Off OSD Language
Auto Sleep
2If you cancel...

 8
On-screen Language 
Selection
1Press MENU (unless you have already selected 
when the set was fi rst switched on). Then press 
c/
d to select “OPTION”, then press 
b or 
ENTER.
OSD Language
West
16:9
On English
TT Language
Aspect Ratio
Blue Screen
Key Lock Off OPTION
First Time Installation
Reset
Software Update(USB)
DivX Reg. Code
Deactivation
2Press 
a/
b to select “OSD Language”, then 
press 
c/
d to select the desired language.
3Press RETURN to exit the menu.
Channel Setup
Press MENU. Select...

 9
Information display
Press . The program information will appear for 
approx. 5 seconds.
Quick View
 button allows you to go back to the last selected 
TV channel.
When you press 
 during external input mode, TV 
switches to the last channel.
Also, when you press 
 during TV, you will not 
return to external input mode, but only switch channels 
between last channel and current channel.
MUTE
Press . The sound will be cut off.
The MUTE can be released by pressing  again or  (Volume) + or -.
Still...