Sharp Lc32lb150u User Guide

67
Sharp 32" LED TV
www.sharpusa.com
Tro u bl e s h o o t i n g
Restoring settings to the defaults
When you restore default settings, all the settings 
you have customized (including parental controls) 
are reset.
To restore settings to the defaults:
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight SETUP, then press T or 
ENTER. The SETUP menu opens.
3Press 
S or T to highlight Reset All, then press 
ENTER. The SETUP · RESET ALL menu opens.
4Press 
S or T to highlight Reset All,...

68
 LC-32LB150U Sharp 32" LED TV
www.sharpusa.com
Video and audio
ProblemSolution
Picture does not 
fill the screen. 
There are black 
bars around the 
picture.• Change the aspect ratio. An 
increasing amount of digital TV 
and movies are presented in 
wide screen (16:9). See the View 
Mode option in “Adjusting the 
TV picture” on page41.
No picture (screen 
is not lit) and no 
sound.• Press   on the TV or the 
remote control.
• Make sure that the Audio Only 
option is set to Off. See “Playing 
TV...

69
Sharp 32" LED TV
www.sharpusa.com
Only snow (noise) 
appears on the 
screen.• Try another channel. The station 
may be experiencing problems.
• Make sure that the antenna or 
cable TV is connected correctly 
and securely. See “Connecting a 
cable or satellite box” on 
page12 or “Connecting an 
antenna or cable TV (no box)” 
on page17.
• If you are using an antenna, the 
digital channel signal may be 
low. To check the digital 
channel signal strength, see 
“Checking the digital signal 
strength”...

70
 LC-32LB150U Sharp 32" LED TV
www.sharpusa.com
Remote control
General
Good picture, but 
no sound.• Increase the volume.
• Make sure that the sound is not 
muted.
• Make sure that you do not have 
headphones connected. When 
headphones are connected, no 
sound comes from the TV 
speakers.
• Make sure that the correct 
audio mode is selected.
• Make sure that the audio cables 
are connected correctly and 
securely to your TV.
• Make sure that the antenna or 
cable TV is connected correctly 
and...

71
Sharp 32" LED TV
www.sharpusa.com
MHL-enabled device or Roku Streaming Stick
“No signal” 
error message is 
displayed.• Press INPUT an d make sure th at 
you have selected the correct 
input for the device or service 
you are trying to use.
• If you are using a cable or 
satellite box, use the remote 
that came with that box to 
change channels.
• Make sure that you have the 
correct input selected to view 
channels from the cable or 
satellite box.
After Auto 
Channel Search, 
there are no...

72
 LC-32LB150U Sharp 32" LED TV
www.sharpusa.com
CEC-compatible device
My TV is playing 
the audio from 
a connected 
device but is 
not displaying 
the video.• Make sure that the MHL cable is 
connected securely to your TV 
and the device.
• Make sure that you are using an 
MHL cable. An MHL cable may 
be difficult to identify. It may 
look like a micro USB-to-HDMI 
cable because the cable 
connectors are the same, but 
the cable itself is thinner. The 
cable also may not be labeled 
MHL.
• Try...

73
Sharp 32" LED TV
www.sharpusa.com
My TV’s remote 
control does 
not control the 
device.• Make sure that there are no 
obstructions between the 
remote control and the remote 
control sensors on your TV and 
the device.
• If the device is not a Sharp 
device, all the buttons may not 
work.
• Make sure that the CEC Control 
feature is turned on. See 
“Turning CEC Control on or off” 
on page58.
• If you are trying to control the 
volume on an HDMI CEC audio 
receiver using your TV remote 
control,...

74
 LC-32LB150U Sharp 32" LED TV
www.sharpusa.com
Specifications
Specifications are subject to change without notice.
Dimensions and weight
Screen
Display resolutions
Tu ne r
InputsOutputs
Audio
Power
Miscellaneous
Without stand28.8 × 17.4 × 2.5 in. (73.2 × 45.3 × 6.4 cm)
12.4 lb. (5.6 kg)
With stand28.8 × 19.3 × 8.1 in. (73.2 × 49 × 20.4 cm)
13.9 lb. (6.3 kg)
Screen size measured 
diagonally31.5 in. 
Display typeLED
Screen refresh rate60Hz
Display resolution1080p
Panel resolution1920 (H) × 1080 (V)...

75
Sharp 32" LED TV
www.sharpusa.com
Programming universal 
remote controls
You can operate your Sharp TV with a new or 
existing universal remote control.
To program a universal remote control:
1See the table in “Common universal remote 
control codes” for common codes. If you have 
problems programming your remote or need a 
different remote control code, see the 
instructions that came with the remote control 
or check the remote control manufacturer’s 
website for the latest remote control code...

76
 LC-32LB150U Sharp 32" LED TV
www.sharpusa.com
Legal notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) this device may not 
cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause 
undesired operation.
This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These...