Sharp Lc32lb150u User Guide

37
Sharp 32" LED TV
www.sharpusa.com
13Press S or T to highlight Antenna, Cable, or 
Satellite Box, then press ENTER. 
AIf you select Antenna, your TV scans for 
available channels. The scan may take 
several minutes.BIf you select Cable, a message asks if you 
have a cable box:
• Select No, then press ENTER if no cable 
box is connected. Your TV scans for 
available channels. The scan may take 
several minutes.
• Select Ye s, then press ENTER if a cable box 
is connected. A message asks how you...

38
 LC-32LB150U Sharp 32" LED TV
www.sharpusa.com
CIf you select Satellite Box, a message asks 
how you connected the satellite box to 
your TV:
•Select HDMI, Component, or AV, then 
press ENTER if you connected a satellite 
box to your TV using one of these cables. 
Read the message, then press ENTER to 
close the wizard.
•Select Coaxial, then press ENTER if you 
connected a satellite box to your TV using 
a coaxial cable. Read the message, then 
press ENTER to start the channel scan (VHF 
channels...

39
Sharp 32" LED TV
www.sharpusa.com
On-screen menu overview
PICTURE menu (TV mode)
SOUND menu (TV mode)
CHANNELS menu (TV mode)SETUP menu (TV mode)
PHOTOS menu (USB mode)
Navigating the menus
Notes
• Depending on the signal source 
selected, you may see different 
options on your screen.
• Menu items that are not selectable are 
grayed out.
• Menus in this manual are described in 
TV mode, unless otherwise indicated.
• The screens shown in this manual are 
for explanation purposes and may 
vary from...

40
 LC-32LB150U Sharp 32" LED TV
www.sharpusa.com
Selecting a channel
To select a channel:
• Press CH or CH to go to the next or previous 
channel on the memorized channel list.
• Press the number buttons to enter the channel 
number you want, then wait for the channel to 
change or press ENTER to immediately change 
the channel.
• To select a digital sub-channel, press the number 
buttons to enter the main digital channel, press 
(sub-channel), then press the number button 
for the sub-channel. Wait...

41
Sharp 32" LED TV
www.sharpusa.com
Adjusting the picture
Adjusting the TV picture
You can adjust various settings to improve the 
quality of the TV picture. Also, you can reset all 
picture settings to the factory default.
To adjust the TV picture:
1Press MENU. The on-screen menu opens with 
the PICTURE menu displayed.
2Press 
T or ENTER to access the menu.
3Press 
S or T to highlight an option, then press 
ENTER to access the option. You can select:
•AV M o d e—Selects the picture mode. You can...

42
 LC-32LB150U Sharp 32" LED TV
www.sharpusa.com
•Overscan—Extends text and images past 
the screen edges to hide edge artifacts. 
Yo u  c a n  s e l e c t  On or Off.
•Active Backlight—Enhances the contrast 
ratio between light and dark areas of the 
picture. You can select On or Off.
•Color Temperature—Selects the color 
temperature. You can select Cool (to 
enhance the blues), Normal, or Warm (to 
enhance the reds).
•Noise Reduction—Selects the noise 
reduction mode to reduce picture noise...

43
Sharp 32" LED TV
www.sharpusa.com
Adjusting the computer image
When you connect a computer to your TV using the 
PC IN jack, you may need to adjust the computer 
image to improve the quality.
To adjust the computer image:
1Make sure that your TV is in PC mode. For more 
information, see “Selecting the video input 
source” on page38.
2Press MENU. The on-screen menu opens.
3Press 
W or X to highlight SETUP, then press 
ENTER. The SETUP menu opens.
4Press 
S or T to highlight PC, then press ENTER....

44
 LC-32LB150U Sharp 32" LED TV
www.sharpusa.com
•Analog TV Sound—(Analog channels only) 
Selects the audio mode. You can select:
•Mono—Select this option if there is noise 
or static on weak stereo broadcasts.
•Stereo—Select this option for programs 
broadcast in stereo.
•SAP—Select this option to listen to a 
secondary audio program, if available.
•Audio Language—(Digital channels only) 
Selects an alternate audio language, if 
available.
•Headphones/Audio Out—You can use the 
/AUDIO OUT jack on...

45
Sharp 32" LED TV
www.sharpusa.com
Playing TV audio only
You can turn off the picture on your TV and listen to 
the program audio only.
To play TV audio only:
1Press MENU. The on-screen menu opens.
2Press 
W or X to highlight CHANNELS, then press T or ENTER. The CHANNELS menu opens.
3Press 
S or T to highlight Audio Only, then 
press ENTER.
4Press 
S or T to select On.
5Press MENU to return to the previous menu, or 
press EXIT to close the menu.
Changing channel settings
Automatically scanning for...

46
 LC-32LB150U Sharp 32" LED TV
www.sharpusa.com
BIf you select Cable, a message asks if you 
have a cable box:
•Select No, then press ENTER if no cable 
box is connected. Your TV scans for 
available channels. The scan may take 
several minutes.
•Select Ye s, then press ENTER if a cable box 
is connected. A message asks how you 
connected the cable box to your TV.
•Select HDMI, Component, or AV, then 
press ENTER if you connected a cable 
box to your TV using one of these 
cables. Read the message,...