Sharp Lc32lb150u User Guide

7
Sharp 32" LED TV
www.sharpusa.com
2If the TV stand is attached, remove the four screws that secure the stand to your TV.
3Remove the TV stand.
4Remove the screws in the mounting holes on the back of your TV, then follow the instructions that came with 
the wall-mount bracket.
Notes
• The length of the wall-mount screws vary depending on the wall-mount 
bracket you purchased. See the instructions that came with the 
wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV...

8
 LC-32LB150U Sharp 32" LED TV
www.sharpusa.com
TV components
Package contents
•32" LED TV
• Remote control and batteries (2 AAA)
•Stand column and screws (4)
• TV base and screws (4)
•Power cord
• Quick Setup Guide
• Important Information
FrontSide
#ItemDescription
Remote control 
sensor and 
power indicatorThe remote control sensor 
receives signals from the remote 
control. Do not block.
The power indicator: 
• Lights blue when your TV is 
on.
•Lights red when your TV is 
off (standby mode)....

9
Sharp 32" LED TV
www.sharpusa.com
Back
#ItemDescription
Power connectorPlug the power cord into this 
connector.
DIGITAL AUDIO 
OUTPUT (optical)
Connect a digital audio 
amplifier, home theater system, 
or sound bar to this jack to 
listen to TV audio through the 
external speakers. For more 
information, see “Using digital 
audio” on page31.
COMPONENT/AV
Y/VIDEO, P
B, PR
OR
COMPONENT/AV 
Y/VIDEOThe COMPONENT/AV Y/VIDEO 
jack works as one of the three 
component video jacks or as a 
composite video...

10
 LC-32LB150U Sharp 32" LED TV
www.sharpusa.com
Remote control
#ButtonDescription
 POWERPress to turn your TV on or off (standby mode). 
Warning: When your TV is off, power still flows 
through it. To disconnect power, unplug the power 
cord.
NumbersPress to enter channel numbers and the parental 
control password.
Press to enter a digital sub-channel number. For more 
information, see “Selecting a channel” on page 40.
AUDIO
Press to select the audio mode for an analog program. 
Yo u  c a n  s e l...

11
Sharp 32" LED TV
www.sharpusa.com
What connection should I 
use?
Your TV has several connection types for 
connecting devices to your T V.
For the best video quality, you should connect a 
device to the best available connection.
Use the following tables to identify cables:
You can use the HDMI 1/ARC/DVI jack on your TV 
to connect a DVI device to your TV. You need to 
attach an HDMI-to-DVI adapter to the end of the 
HDMI cable that connects to the DVI device. 
Video 
qualityConnection 
type and...

12
 LC-32LB150U Sharp 32" LED TV
www.sharpusa.com
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the 
best connection type available. For more information, see “What connection should I use?” on page11.
Using HDMI (best)
To connect a cable or satellite box using HDMI:
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall...

13
Sharp 32" LED TV
www.sharpusa.com
Using DVI (same as HDMI but requires an audio connection)
To connect a cable or satellite box using DVI:
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the 
adapter to the DVI OUT jack on the cable or satellite box....

14
 LC-32LB150U Sharp 32" LED TV
www.sharpusa.com
Using component video (better)
To connect a cable or satellite box using component video:
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect a component video cable (not provided) to the COMPONENT/AV Y/VIDEO, P
B, and PR video jacks on 
the back of your TV and the component video out jacks on the...

15
Sharp 32" LED TV
www.sharpusa.com
Using composite video (good)
To connect a cable or satellite box using composite video:
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect an AV cable (not provided) to the COMPONENT/AV Y/VIDEO jack and L and R audio jacks on the back 
of your TV and to the composite video and audio out jacks on the cable or...

16
 LC-32LB150U Sharp 32" LED TV
www.sharpusa.com
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3Connect a coaxial cable (not provided) to the ANT/CABLE jack on the back of your TV and to the coaxial out jack 
on the cable or satellite box.
4Plug your TV’s power cord into a power...