Sharp LC-80LE632U HDTV Owners Guide

							59
■ Command table•  Commands not indicated here are not guaranteed to operate.
CONTROL ITEM
COMMANDPARAMETERCONTROL CONTENTS
POWER ON COMMAND SETTING
POWER SETTING The Power On command rejected.
It input-switches by the toggle. (It is the same as an input change key\
)
It input-switches to TV. (A channel remains as it is. (Last memory))
Although it can choose now, it is toggle operation in inside.
The screen position variable ranges depend on the View Mode or the 
signal type. The ranges can be seen on the position-setting screen.
0: Although it can choose now, it is toggle operation in inside.
1: Only available when 4:3 signal is being input.
5, 6: Only available when 4:3 signal is being input.
8: [PC] Available except when UXGA is being input. 
    [AV] Only available when 1080i/p is being input.
9: Only available when 720p is being input.
10, 11: Available when USB-Video, DLNA-Video or Internet application is used.
(Toggle)
0: (Toggle), 1:  STANDARD, 2: MOVIE , 3: GAME, 
4: USER, 5: DYNAMIC (Fixed), 6: DYNAMIC, 7: PC, 
100: AUTO
Volume (0–60)
Only PC mode. (0–180)
Only PC mode. (0–40)
0: (Toggle) [AV], 1: Side Bar [AV], 2: S.Stretch [AV]
3: Zoom [AV], 4: Stretch [AV], 5: Normal [PC]
6: Zoom [PC], 7: Stretch [PC], 
8: Dot by Dot [PC] [AV], 9: Full Screen [AV]
10: Auto [USB-Video, DLNA-Video or Internet applications], 11: Original [USB-Video, DLNA-Video or Internet applications]
An input change is included if it is not TV display.
In Air, 2–69ch is effective.
In Cable, 1–135ch is effective.
If it is not TV display, it will input-switch to TV. (same function as CH
U)
If it is not TV display, it will input-switch to TV. (same function as CH V)
Toggle operation of a closed caption.
0: (Toggle), 1: On, 2: Off
0: Off, 1: OFF TIMER – 30 MIN., 2: OFF TIMER – 60 MIN., 
3: OFF TIMER – 90 MIN., 4: OFF TIMER – 120 MIN.
The channel number of TV
The channel number of TV +1
The channel number of TV–1(Toggle) (1–135)
R S PW
I T GD
I T VD
I AVD
INPUT SELECTION TOGGLE
AV MODE SELECTION
VOLUME
POSITION
VIEW MODE
SURROUND
SLEEP TIMER
CHANNEL
CC DIRECT
(ANALOG)
(DIGITAL)
CH UP
CH DOWN CHANNEL H-POSITION H-POSITION
V-POSITION
CLOCK
PHASE
A VMD
VOLM
HPOS
V POS
CLCK
PHS E
ACSU
O F TM DCCH
CHUP
C H DW
CLCP
W I DE
0
x
0
*
*
*
*
*
*
*
*
*
*
x
x
x *
*
_
_
_ _
_ _ *
*
*
*
*
_
_
_
_
_
*
_
_
_ _
_ _ *
*
*
*
_ _
_
_
_
_
_ DIGITAL Air (Two-Part numbers, 2-digit plus 2-digit)
(0100-9999)
(1-999)
(0-999)
(0-9999)
(0-6383) DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)
DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit) Front half of DIGITAL CABLE CHANNEL NO. (Designate major channel)
Rear half of DIGITAL CABLE CHANNEL NO. (Designate minor channel)
DIRECT
CHANNEL
DA2P * * * *
DC 2 U * * * _
DC 2 L * * * _
DIGITAL Cable (One-Part numbers, 5-digit, less than 10,000)
DC 1 0 * * * *
DIGITAL Cable (One-Part numbers, 5-digit, more than 10,000)
DC 1 1 * * * *
_
_
_ The device name set in "IP Control Setup" is displayed.
DEVICE NAME
T V NM 1 _ _ _
The model name of the TV
MODEL NAME
MN R D 1 _ _ _
The current version of the TV software is displayed.
SOFTWARE VERSION
SWV N 1 _ _ _
The currently supported version of IP protocol is displayed.
IP PROTOCOL VERSION I PPV 1 _ _ __
(Toggle)
AUDIO SELECTION
ACHAx___
_0: (Toggle), 1: On, 2: Off
MUTE
MU T E* ____ _
_
_
_ _ _ Off
The Power On command accepted.
1 _ _ _ On [RS-232C]
The Power On command accepted.
When the power is in standby mode, commands also go to waiting status 
and so power consumption is just about the same as usual. With the 
commands in waiting status, the Center Icon Illumination on the front of the 
TV lights up.
2 _ _ _ On [IP]
Power On
1 _ _ _ Power On It shifts to standby.
P O W R 0 _ _ _ Power Off
_
_
_
_
TV
1-7
1: HDMI 1, 2: HDMI 2, 3: HDMI 3, 4: HDMI 4, 
5: COMPONENT, 6: VIDEO 1, 7: VIDEO 2
•  If an underbar (_) appears in the parameter column, enter a space.
•  If an asterisk (*) appears, enter a value in the range indicated in br\
ackets under CONTROL CONTENTS.
•  Any numerical value can replace the “x” on the table.
Using a PC
-$-&6@&JOEC





 
						

							60
Using the Internet
By connecting your TV to a broadband system, you can access the Internet\
 from the TV.
•  Display the latest Internet information and access a range of useful inf\
ormation for AQUOS users from the original home page*.
•  Use "AQUOS ADVANTAGE LIVE" to obtain the latest software and receive onl\
ine user support.
•  You can enjoy a variety of streaming content and Internet applications.
* About the original home page
•  The original home page is a website set up specifi cally for AQUOS owners. 
•  The website is worth visiting as it provides a range of useful informati\
on, including tips on using your AQUOS  and a frequently asked questions section.
Connecting to the Internet
•  To connect your TV to the Internet, you must have a broadband Internet c\
onnection.
•  If you do not have a broadband Internet connection, consult the store wh\
ere you purchased your TV or ask your Internet service provider or telephone company.
•  When an Internet connection is made, an Ethernet and wireless connection\
 cannot be used at the same time.  Use only one of the connection types. (See page 62.)
+Using an ETHERNET cable
Use an ETHERNET cable (commercially available) to connect the ETHERNET\
 terminal on the TV to your broadband 
router (commercially available).
ETHERNET cable
Internet
Modem PC
LAN
Broadband router
-$-&6@&JOEC





 
						

							61
+Using the wireless LAN
This TV is equipped with a wireless LAN function.
For a wireless LAN connection, you must use "Wireless Setup" to connect \
the access point and TV. (See page 62.)
Internet
Modem PC
Wireless LAN router/
access point
•  This TV has a built-in wireless LAN function. Using a separate wireless \
USB LAN adapter may result in radio communications 
that do not comply with regulations on radio communications. Therefore, \
do not use a separate wireless LAN adapter.
•  This TV has received the following certifi cations. - Wi-Fi CERTIFIED™ (certifi cation program from the Wi-Fi Alliance
®)
- Wi-Fi Protected Setup™ (certifi cation program from the Wi-Fi Alliance®)
•  Operations cannot be guaranteed when used with access points that do not\
 have Wi-Fi® cer tifi cation.
•  A wireless LAN router/access point is required to connect the TV to the \
Internet using a wireless LAN. See the operation  manual of your access point for setup.
•  If your access point is set to a stealth mode (that prevents detection \
by other devices), you may not be able to establish a  connection. In this case, disable the stealth mode on the access point.
•  A wireless LAN connection and performance cannot be guaranteed for all r\
esidential environments. In the following cases, the  wireless LAN signal may be poor or drop, or the connection speed may bec\
ome slower.
- When used in buildings made with concrete, reinforced steel, or metal
- When placed near objects that obstruct the signal
- When used with other wireless devices that emit the same frequency
- When used in the vicinity of microwave ovens and other devices that emit\
 a magnetic fi eld, electrostatic charge, or electromagnetic interference
•  When there is signifi cant interference in the 2.4-GHz frequency (such as from other wireless\
 LAN devices, Bluetooth
® devices, 
2.4-GHz cordless telephones, and microwave ovens), it is recommended th\
at you use a wireless LAN router/access point that 
supports IEEE802.11a/n (5 GHz) and set the access point to transmit at\
 5 GHz. For setup details, see the operation manual of 
your access point.
•  For users outside the United States, be sure to select your country befo\
re using the wireless LAN function. (See page 63.)
•  A stable connection speed is required to play back streaming content. Us\
e an Ethernet connection if the wireless LAN speed  is unstable.
•  Before transferring to a third party or disposal, be sure to initialize \
the wireless LAN settings.
•  Please follow the legislation in your country when using the wireless LA\
N outdoors.
Using the Internet
-$-&6@&JOEC





 
						

							62
Internet Setup
Example
Menu
EZ Setup
Internet Setup
Language
DivX®Setup
Broadcasting Setup
Initial Setup
Initial
Setup[English]
Connection Type
1 Press 
MENU to display the MENU screen, and then 
press c/
d  to select "Initial Setup".
2 Press  a
/b  to select "Internet Setup", and then 
press ENTER.
3 Press  a
/b  to select "Network Setup", and then 
press ENTER.
4 Press  a
/b  to select "Connection Type", and then 
press ENTER.
5 Press 
c/
d  to select "Wired" or "Wireless", and 
then press ENTER.
•  If you select "Wired", the signal is detected and setup 
is performed automatically. Use "IP Setup" to check 
and change the settings as necessary. (See page 63.)
•  If you select "Wireless", use "Wireless Setup" to  confi gure the access point settings. 
Wireless Setup
If your access point supports Wi-Fi Protected Setup 
(WPS), it is recommended that you use this function 
for the wireless connection. You can press the WPS 
button on the access point to confi gure the settings 
automatically.
•  The name of the WPS button function may differ depending  on the access point. See the operation manual of the 
access point for details.
1  Confi rm the current settings in "Connection Type".
•  If "Wired" is selected, press  c/
d  to select "Wireless".
2 Press  a
/b  to select "Wireless Setup", and then 
press ENTER.
•  Confi rm the settings. If each setting item is correct, 
press MENU to exit.
•  If you are confi guring the wireless setup for the fi rst  time or changing the settings, go to step 3.
3 Press  c/
d  to select "Change", and then press 
ENTER.
4 Press  a
/b  to select "WPS", and then press 
ENTER.
•  To select and register an access point manually, select 
"Search" or "Manual Setup" and make the necessary 
settings.
5 Press  a
/b  to select "Push button", and then press 
ENTER.
•  To confi gure the setting via PC, select "PIN code". 
Follow the on-screen instructions and the operation 
manual of the access point to confi gure the settings.
6  Select "Next" to complete the settings. 
•  The connection process starts and the WPS button on the access point can be pressed.
7  Press the WPS button on the access point.
•  Pressing the WPS button displays a confi rmation screen. Please wait until a connection is established.
8  When a connection is established, the connection 
details are displayed. Press ENTER.
Interactive Service
If you do not want other people to connect to the 
Internet in your absence, you can make settings to 
keep the TV away from the Internet.
1 Press  MENU to display the MENU screen, and then 
press c/
d  to select “Initial Setup”.
2 Press  a
/b  to select “Internet Setup”, and then 
press ENTER.
3 Press  a
/b  to select “Interactive Service”, and then 
press ENTER.
•  Input the 4-digit secret number by using 0-9.
4 Press 
c/
d  to select “No”, and then press ENTER.
•  If you want to allow Internet connection, select “Yes”, 
and then press ENTER.
5 Press  MENU to exit.
Checking Your Internet Connection
PressAQUOS NET once or twice to switch to the 
TV+Web or Web screen. 
•  If ""or "" is displayed after you connect to the 
Internet, check your TV's network settings and connection.
•  When the original home page appears, now you are  connected to the Internet.
•  You can also display the AQUOS NET screen by pressing  FAV APP on the remote control unit. See page 35 for 
details on the FAV APP key Assign function.
•  If you have failed to connect to the Internet in the above operation, then an error message will appear. In this case, 
press EXIT to exit from the connected TV feature to make 
changes to the network settings (see page 63).
•  If you still cannot connect to the Internet, please consult  your Internet service provider or telephone company.
•  When an application is used, you cannot make settings for  "Internet Setup".
If you need to make the settings of "Internet Setup", press 
EXIT to exit from the connected TV feature.
Using the Internet
-$-&6@&JOEC





 
						

							63
Using the Internet
+If you cannot connect to the Internet
Perform the procedures below to check your TV's 
network settings.
IP Setup
1 Press  EXIT to exit from the connected TV feature.
2 Press MENU to display the MENU screen, and then 
press c/
d  to select “Initial Setup”.
3 Press  a
/b  to select “Internet Setup”, and then 
press ENTER.
4 Press  a
/b  to select “Network Setup”, and then 
press ENTER.
5 Press  a
/b  to select “IP Setup”, and then press 
ENTER.
•  Check that numbers are displayed for each setting.
•  If there are any settings without numbers, specify the 
numbers by following the on-screen instructions.
•  For information on how to enter text, see page 64.
Example
InitializeChange
IP Address  :  Auto Setup
Netmask  :  Auto Setup
Gateway  :  Auto Setup
DNS  :  Auto Setup
Proxy  :  No Use
MAC Address  :  XX:XX:XX:XX:XX:XX Setting IP information
[Current Setup]
6Press MENU to exit.
Setting the Country
1  Repeat steps 1 to 4 in IP Setup.
2 Press  a
/b  to select "Country", and then press 
ENTER.
3 Press  a
/b  to select "US", "Canada", "Mexico" or 
"Others", and then press ENTER.
•  If you select “Others”, you need to set the desired area.
4 Press  MENU to exit.
Setting the Zip Code
1  Repeat steps 1 to 4 in IP Setup.
2 Press  a
/b  to select “Zip Code”, and then press 
ENTER. After “Change” is highlighted, press 
ENTER again.
3  Enter your zip code.
• Use  0-9 on the remote control unit, or use the software 
keyboard.
4  After “Complete” is highlighted, press ENTER.
5 Press  MENU to exit.
Displaying Updated Information and 
Support Service
This function can be used to display up-to-date 
information on the original home page and allow you to 
receive support service over the network.
Original Home Page
1 Press AQUOS NET once or twice.•  You can also display the original home page by 
pressing FAV APP on the remote control unit. See 
page 35 for details on the FAV APP key Assign 
function.
•  Each time you press AQUOS NET, the screen image  toggles as shown below:
TV+Web      Web      TV
•  When you are not connected to the Internet, a network function explanation screen is displayed.
The services displayed vary depending on 
circumstances.
2 Press  a
/b /c
/d
 to select a title, and then press 
ENTER.
•  The service details vary depending on circumstances.
3Press EXIT to exit from the connected TV feature.
•  Web page appearances may differ depending on the type 
of screen (TV+Web or Web).
•  When displaying TV+Web with a channel in which the  V-Chip is enabled, the cursor keys on the remote control 
unit do not function.
AQUOS Advantage Live
1 Press  APPS to display the application window.
2 Press 
c/
d to select “AQUOS ADVANTAGE LIVE”, 
and then press ENTER.
•  You can also display the AQUOS ADVANTAGE LIVE 
screen by pressing FAV APP on the remote control 
unit. See page 35 for details on the FAV APP Key 
Assign function.
3 Press  a
/b /
c /
d  to select the desired service.
4 Press 
EXIT to exit from the connected TV feature.
•  The display may change as a result of a software update.
-$-&6@&JOEC





 
						

							64
Entering Text (Software Keyboard)
When you are editing an input screen or specifying the 
Ethernet settings used for accessing the Internet, enter 
text from the software keyboard.
•  You can enter up to 128 characters for text.
•  Some special characters or diacritics may not be available depending on where you enter the text.
Buttons Description
a Moves the focus up. When the focus is at the top edge, this moves the fo\
cus to 
the opposite edge (bottom edge). 
b Moves the focus down. When the focus is at the bottom edge, this moves t\
he 
focus to the opposite edge (top edge). 
c Moves the focus left. When the focus is at the left edge, this moves the\
 focus to 
the opposite edge (right edge).
When the focus is on “Character Set”, this selects the character t\
ype (moving 
backwards).
When the focus is in an input box, this moves the cursor in the input bo\
x to the left. 
d Moves the focus right. When the focus is at the right edge, this moves t\
he focus to 
the opposite edge (left edge).
When the focus is on “Character Set”, this selects the character t\
ype (moving 
forwards).
When the focus is in an input box, this moves the cursor in the input bo\
x to the 
right.
ENTER Performs the processing for the button currently in the focus. 
EXIT Closes the software keyboard without applying the original input element\
s for the 
entered text.
Erases the text in the input box where the cursor is currently located. \
RETURN When the cursor is at the end of a sentence, this acts as a backspace. 
0-9 Directly enters the single-byte number for that button.
A (red) Directly enters prediction candidate 1. 
B (green) Directly enters prediction candidate 2.
C (blue) Directly enters prediction candidate 3.
D (yellow) Enters a space. 
Caps Off/Caps On/Caps Lock
If “alphabet” is selected in “Character Set”, this switches \
characters between uppercase and lowercase.
Each time you press ENTER, the character type switches as 
shown below:
Caps Off: all the characters are lowercased
Caps On: only the fi rst character is uppercased
Caps Lock: all the characters are uppercased
Done
Applies the entered information and closes the software 
keyboard.
Quit
Closes the software keyboard without applying the entered 
information.
•  You can also close the software keyboard by pressing 
EXIT on the remote control unit.
Displays the icon “”, indicating that a new line has been 
inserted.
Clear
Erases the character string.
•  When the cursor is somewhere in a line: the character 
string to the right of the cursor will be erased.
•  When the cursor is at the right end of a line: the entire line  will be erased.
Delete
If the cursor is at the right end of a line, this erases text one 
character at a time.
•  You can also delete text by pressing RETURN on the 
remote control unit.
Using the Internet
The text you enter is displayed as you type it in. 
To move the cursor (the current input position), use 
“
” or “” on the software keyboard.
Press c/
d  to select the type of characters entered: 
alphabet, number or sign.
(The selectable types depend on the input source.)
While you are entering text, likely input conversion candidates 
are displayed based on what you typed in.
• You can also enter text by pressing A, B or Con the remote 
control unit. Enters a space.
-$-&6@&JOEC





 
						

							65
Using the Browser
ENTER,a/
b /
c /
d• Press a /
b /
c /
dto select a link that you want to jump, 
and then press ENTER.
EXIT•  Press the button to return to the TV screen.
RETURN•  Press the button to return to the previous page.
Example : The image shown below, which is only for  explanation, is subject to change.
About links
•  Web pages on the Internet often include “links” that allow you to jump to other web pages (or sites).
•  “Links” can take various forms, including words  or images, but they always work in the same way 
letting you jump to the link destination when you 
select them.
•  Selected items (such as links of text input fi elds) are  enclosed in a yellow frame.
•  You can jump from a “link” to the corresponding link  destination.
CAUTION
•  If the power is cut due to a power failure or the TV being 
unplugged while you are using the Internet, information 
such as bookmarks or cookies may not be saved correctly.
When a security notifi cation window is displayed:
• Press 
ENTER to close the window.
•  This window appears when you visit a web page that has  security protection, or when you move from a protected 
page to an unprotected page.
•  In “Security Settings” you can set whether or not this  window is displayed. (See page 68.)
When a cookie confi rmation window appears:
Choose whether or not to accept the cookie (see page 68), 
and then press 
ENTER.
•  In “Cookies” settings you can set whether or not this  window is displayed. You can also opt to delete all the 
cookies at once. (See page 68.)
To users who access the Internet from a PC
•  When you access the Internet from this TV, the procedures may not be the same as regular 
browser-based access on a PC.
•  You cannot download fi les.
•  You cannot view a history of the pages you have  visited.
•  You cannot change the startup page displayed  when you press AQUOS NET.
•  Pop-up windows appear in separate tabs.
•  On some pages, video and audio cannot be  played, and text or images may not be displayed 
correctly.
When “z” is displayed in a page:•  The page failed to load successfully, or it contains images 
with formats that cannot be displayed on the TV. Try 
reloading the page by selecting “
” (see page 66) in the 
toolbar.
Using the Internet
Photo Player
:ToolD:ScrollAQUOSConsole
Click   this  bu t t on  to  go   to  AQUOS  Network.
Page   1
       o f  3Add Widgets
Legal
AQUOSCenterAQUOS NetworkWhat’s New
Featured Content
Sports
Entertainment
AQUOSGallery
CONSOLE
MondayTodayWednesdayTuesday
AQUARIUSGEMINIPISCESARIES
Pages with security protection are 
clearly shown as such.
If content on a page is continued on another page, 
directions to that page are shown clearly.
You can use  a/
b /
c /
d  to go to the continuation of a 
page.
•  Where there is link text or a link image in the  direction pressed, the text or image is selected fi rst. 
If this happens, press the same direction button 
several times.
Tab
-$-&6@&@JOEE





 
						

							66
Using the Toolbar
You can use the toolbar to control the browser and to 
specify settings.
1PressD on the remote control unit to display the 
toolbar.
2Press c/
d  to select a function, and then press 
ENTER.
Selected item Description
Displays the linked page in a new tab.
Displays the Tab menu.
Returns to the previous page.
Goes back to the original page when you 
have viewed the previous page.
Refreshes the page.
Interrupts a page while it is loading.
Displays the original home page.
Select this to open a bookmark.
Adds the current page to your bookmarks.
Displays the Browser menu.
Using Tabs
You can use tabs to view up to 3 web pages at the 
same time. Each page appears in a separate tab, and 
you can switch between the tabs.
1PressB on the remote control unit to display the 
Tab menu.
•  You can also display the Tab menu by clicking “” in 
the toolbar.
Selected item Description
Select This Displays the web page in the 
selected tab.
Close This Tab Closes the selected tab.
•  You can also press C on the 
remote control unit to close a 
tab.
Close Other Tabs Closes the other (unselected) tabs.
Create New Tab Creates a new tab.
•  You can also press A on the 
remote control unit to create a 
tab.
2Press c/
d  to select a tab.
3Press
a/
b  to select the item you want to use, and 
then press ENTER.
Using the Internet
-$-&6@&JOEC





 
						

							67
Saving the URL of the Current Page
Adding a web page to your bookmarks allows you to 
return to that page later by simply selecting it from your 
list of bookmarks.
1Display the page that you want to bookmark.
2PressD on the remote control unit to display the 
toolbar.
3Press c/
d  to select  “”
 in the toolbar, and then 
press ENTER.
4Select “Yes”, and then press ENTER.
•  The page is added to your bookmarks.
Opening a Bookmarked Page
1Press D on the remote control unit to display the 
toolbar.
2Press c/
d  to select  “”
 in the toolbar, and then 
press ENTER.
•  Your bookmarks list is displayed.
3Press
a/
b /
c /
d  to select the page you want to 
access, and then press ENTER.
•  The selected page is displayed.
•  If you have bookmarked 11 or more web pages, press 
c/
d  to scroll through your bookmarks list. 
When opening a bookmark in a new tab:
1 Press
A instead of ENTER.
•  The Bookmarks menu appears.
2Select “Open in New Tab”, and then press 
ENTER.
Editing Bookmarks
You can rearrange or delete the  bookmarks.
■
Switching between the URL and title name
1Press
D on the remote control unit to display the 
toolbar.
2Press c/
d  to select  “”
 in the toolbar, and then 
press ENTER.
•  Your bookmarks list is displayed.
3Press
a/
b  to select the title you want to edit from 
the bookmarks list, and then press A on the remote 
control unit.
•  The Bookmarks menu appears.
4Select “Display by Address” or “Display by Title” in 
the Bookmarks menu, and then press ENTER.
■ Rearranging displayed items
1Press
D on the remote control unit to display the 
toolbar.
2Press c/
d  to select  “”
 in the toolbar, and then 
press ENTER.
•  Your bookmarks list is displayed.
3Press
a/
b  to select the title you want to display 
in a different position from the bookmarks list, and 
then press A on the remote control unit.
•  The Bookmarks menu appears.
4Press a/
b  to select “Move Up” or “Move Down”, 
and then press ENTER.
■ Deleting bookmarks
1Press
D on the remote control unit to display the 
toolbar.
2Press c/
d  to select  “”
 in the toolbar, and then 
press ENTER.
•  Your bookmarks list is displayed.
3Press
a/
b  to select the title you want to delete, 
and then press A on the remote control unit.
•  The Bookmarks menu appears.
4Press a/
b  to select “Delete”, and then press 
ENTER.
•  To delete all the bookmarks, select “Delete All”.
5Press c/
d  to select “Yes”, and then press 
ENTER.
Using the Internet
-$-&6@&JOEC





 
						

							68
Browser Settings
You can check or modify your browser settings from 
the Browser menu. 
The Browser menu includes a display settings menu 
and a security settings menu.
1PressD to display the toolbar.
2Press
c/
d to select  “”
 in the toolbar, and then 
press ENTER.
3Press
c/
d  to select the settings menu you want to 
access.
4Press a/
b  to select and confi rm the item you want 
to set.
5Press a/
b /
c /
d  to specify the required setting, 
and then press ENTER.
6Press D to exit.
View Settings
Zoom In/Out: Zoom in: Displays content enlarged to 200%.
Normal: Displays content at 100%.
Zoom out: Displays content reduced to 75%.
Encoding: Selects the desired encoding from the list below:
Western (ISO-8859-1)/Unicode (UTF-8)
Page Information: Displays information about the currently  displayed page.
Reset: Yes: Resets the browser settings.
No: Does not reset the browser settings.
•  “Reset” does not reset the certifi cation enable/disable and Encoding settings.
Security Settings
Security: Save Setting: If you select this option, a message is displayed when you move from a protected page to an 
unprotected page.
To change this setting, remove the tick, select “Save 
Setting” and then press ENTER.
Root Certifi cates/CA Certifi  cates: Displays the list of 
certifi cates. To disable a certifi cate, select the certifi cate 
to be disabled and press A to display the sub-menu. 
Select “Disable”, and then press ENTER.
• Disabled certifi cates are shown unticked in the  certifi cate list screen.
Cookies: Accept all: Select this option to accept all cookies.
Reject all: Select this option when you do not want to accept cookies.
Prompt before accepting: When you open a page  that uses cookies, this option displays a confi rmation 
message.
Delete All Cookies: Deletes all your cookies.
Server Certifi  cates: Displays certifi cates for the connected 
server.
Browser Information: Displays browser information.
•This product contains NetFront Browser of  ACCESS CO., LTD.
•ACCESS, the ACCESS logo and NetFront are registered trademarks or trademarks of 
ACCESS CO., LTD. in the United States, 
Japan and/or other countries.
  © 2009 ACCESS CO., LTD. All rights  reserved.
•This software is based in part on the work of the Independent JPEG Group.
Using the Internet
-$-&6@&JOEC