Sharp LC-80LE632U HDTV Owners Guide

							39
■Updating the Software via the Network
1 Press a/
b on the Manual Update screen to select 
"Network Update", and then press ENTER.
•The TV connects to the network and checks for updates.•  To cancel, press ENTER.
Abort
Connecting to Internet..
Checking for the latest software version..
Accessing..
2  The current version of the TV and the latest version of software are displayed. To update the TV 
software, select “Yes”, and then press ENTER.
Latest software version has been found.
A software update is available.Proceed with update?
Update time may change depending on the network environment Current Version
 XXXXXXXX
Latest Version
 XXXXXXXX
Estimated Update Time
 XX
NoYe s
•  When a server connection cannot be established or an 
update is not available, a message is displayed.
If a server connection cannot be established, check the 
broadband connection and Internet Setup.
Cannot reach the server.
Check the network settings and try again.
OK
OK
The TV does not need to be updated.
3  After the update fi le is downloaded, the software  update process begins.
Downloading the latest software..
30%Abort
Update Version
 XXXXXXXX
50%
Do not unplug AC cord.
Remote control operation is disabled during update process.
Updating to the latest software..
Update Version
 XXXXXXXX
CAUTION
• Do not unplug the AC cord while the software is 
being updated.
4  When the software is successfully updated, a 
screen is displayed indicating that the update 
process is completed.
A screen indicating that the update is completed 
is displayed. 4 seconds later, the TV restarts 
automatically.
Software update is complete.
Update Version
 XXXXXXXX
•  If the software was not updated successfully, check the  broadband connection and Internet Setup, and then try 
updating the software again.
OK
Failed to complete update.
Please retry from Software Update menu.
■Updating the Software with a USB Memory DeviceTo check for the availability of a software update, visit
http://www.sharpusa.com/products/support/. If you 
have any questions, please
call 1-800-BE-SHARP (800-237-4277).
CAUTION
•  Do not remove the USB memory device or unplug  the AC cord while the software is being updated.
•  Be sure to properly follow the whole procedure  described below, step by step. Otherwise, for 
example, the TV cannot read the data in the USB 
memory device and software updating will fail.
1  Insert the USB memory device with the update fi le into the USB 1 or USB 2 terminal on the TV.
•  When you update the software, use only one USB  terminal. Either USB 1 or USB 2 is usable.
or
2 Press  a
/b  on the Manual Update screen to select 
"USB Update", and then press ENTER.
On-Screen Display Menu
-$-&6@&JOEC





 
						

							40
3 Press ENTER to start checking the data in the USB 
memory device.
Insert the USB memory device 
containing the software update file.
OK
4  During the data checking, “Checking” blinks.
Now checking the data 
in the USB memory device.
Checking
•  The current version of the TV software and the version  of the update fi le on the USB memory device are 
displayed.
Example
Software update file is detected 
in the USB memory device. Start update?
NoYe sCurrent Version                  :  UXXXXXX1
Update Version                  :  UXXXXXX2
•  If the USB memory device is not properly installed or  the correct update fi le cannot be found on the USB 
memory device, an error message is displayed.
  Check the fi le on the USB memory device, and then  reinsert the USB memory device correctly.
Software update file is not detected in the USB memory device.
Confirm that you have transferred the file
to the USB memory device and retry software update.
OK
There is more than one software file in the USB memory device. Confirm that only the software update file is in the USB memory device.
OK
On-Screen Display Menu
5  To update the TV software with the update fi le, select “Yes”, and then press ENTER.
Software update file is detected 
in the USB memory device. Start update?
NoYe sCurrent Version                  :  UXXXXXX1
Update Version                  :  UXXXXXX2
Example
30%
Now updating
Update Version                  :  UXXXXXX2
Do not unplug AC cord.
Remote Control operation is disabled during Update process.
CAUTION
•
Do not remove the USB memory device or unplug 
the AC cord while the software is being updated.
6  When the software is successfully updated, a 
screen is displayed indicating that the update 
process is completed.
  After this screen is displayed, the TV automatically  turns off and then turns on again.
Example
Software update is complete.
OK
Update Version                  :  UXXXXXX2
•  If the update has failed, check the fi le in the USB 
memory device and try Software Update again.
Failed to complete update.
Retry Software Update.
If system Update fails again,
contact the customer service center.
OK
Update Version                  :  UXXXXXX2
7  After the screen shown below is displayed, press 
ENTER.
System software was 
successfully updated.
Remove the USB memory device.
OK
8  Remove the USB memory device.
-$-&6@&JOEC





 
						

							41
Enjoying Photo/Music/Video Playback
You can connect the TV to a USB memory device, USB hard drive or home ne\
twork (DLNA) server to enjoy 
viewing pictures, listening to music, and watching videos.
•  Depending on the USB memory device/USB hard drive/home network (DLNA) \
server, the TV may not be able to recognize the recorded data.
•  It may take time to read the recorded data if the USB memory device/USB \
hard drive/home network (DLNA) server contains  many fi les or folders.
•  Use only alphanumeric characters for naming fi les.
•  File names over 80 characters (may vary depending on character set) ma\
y not be displayed.
Connecting a USB Memory Device/USB Hard Drive
Insert the USB memory device with recorded photos, music or videos into \
the USB 1 or USB 2 terminal on the TV.•  If USB memory devices are inserted into both terminals, the USB 1 termin\
al has priority.
or
•  When connecting a USB hard drive, be sure to use a hard drive with an AC\
 adapter.
•  Do not remove a USB memory device or memory card from the TV while trans\
ferring fi les, using the slide show function, or  switching screens, or before you exit "USB" from the INPUT list.
•  Do not insert and remove a USB memory device/USB hard drive to and from \
the TV repeatedly.
•  When using a card reader, be sure to insert Memory fi rst before using the card reader.
•  USB input cannot be selected when displaying the browser. Close the brow\
ser fi rst.
CAUTION
•  Do not use a USB extension cable when connecting a USB memory device to \
the USB terminal on the TV.
• Using a USB extension cable with the USB memory device may prevent \
the TV from performing correctly.
Connecting a Home Network (DLNA) Server
Connect the TV to the home network (DLNA) server using an ETHERNET cab\
le.•  You can also connect a Home Network (DLNA) server by using a wireless \
LAN.
Home network (DLNA) server ETHERNET cable
Router
•  Do not disconnect a home network (DLNA) server from the TV while trans\
ferring files, when a screen is switching to another or before you exit "Home Network (DLNA)" from the INPUT list.
•  Do not connect and disconnect a home network (DLNA) server from the TV\
 repeatedly.
-$-&6@&JOEC





 
						

							42
Select the Files to Play Back
•  To play back data on a USB memory device, insert the USB memory device on the TV. USB mode is selected 
automatically. (Go to step 2)
•  Use the following procedure to switch back to USB mode  after switching from USB mode to another mode.
1   Select "USB" or "Home Network (DLNA)" from INPUT list screen.
2   Press D.
■  USB memory device
Press a
/b /c
/d
 to select the drive where you 
want to fi nd your fi les, and then press ENTER.
Drive1 Drive2
Drive5 Drive6 Drive3
Drive4
Example
•  If the TV is turned off and then on again, the number  assigned to the USB drive may change.
■ Home Network (DLNA)
Press a
/b  to select the server where you want to 
find your files, and then press ENTER.
Server1
Server2
Example
3   Press  c/
d  to select "Photo", "Music" or "Video", 
and then press ENTER.
Music
Photo
Video
Example
4   Press  c/
d  to select the desired folder, and then 
press ENTER.
•  You cannot switch the input mode if a USB memory device 
is not connected.
•  You do not need to select the drive/server in step 2 when  there is only one drive in the connected USB memory 
device or there is only one home network (DLNA) server 
connected to the TV.
•  16 is the maximum number of USB drives and 10 is the  maximum number of home network (DLNA) servers that 
can be displayed.
•  "VIEW MODE" is fi xed during the Photo or Music mode.  During "Video mode", you can select "Auto" or "Original".
•  The key guide display disappears automatically after a  particular time has elapsed. To display the key guide 
display again, press DISPLAY.
■ When displaying the data with the APPS
The Media screen can be displayed even by using the 
application window.
1   Press APPS to display the application window.
2   Press  a/
b /
c /
d  to select "USB Media" or "Home 
Network (DLNA)", and then press ENTER.
•  If "" is displayed after you switch to USB mode, 
check the USB connection.
•  If "
"or "" is displayed after you switch to 
Home Network (DLNA) mode, check your TV's network 
settings and connection.
•  You can also display the Media screen by pressing  FAV APP on the remote control unit. See page 35 for 
details on the FAV APP Key Assign function.
Enjoying Photo/Music/Video Playback
-$-&6@&JOEC





 
						

							43
Enjoying Photo/Music/Video Playback
Playing Back Files on a USB 
Memory Device
Photo Mode
Viewing Thumbnails
...
...picture 5picture 4picture 2picture 1picture 3
Example
Buttons for thumbnail operations
Buttons Description
a /
b /
c /
d Select a desired item.
ENTER Display the photo.
RETURN Return to the previous process.
A (red) Select the images to be displayed. Press 
this button to add or remove a checkmark.
B (green) Display the music list screen.
C (blue) Start the slide show.
D (yellow) Display the USB MENU screen.
•  When there are invalid photo fi les, the X mark will be 
displayed for the fi le.
•  You can see the fi le name, shooting date, fi le size and pixel  size of the selected photo in the lower-left corner of the 
screen (shooting date is only available in the EXIF fi le format).
Viewing Individual Photos
The photo selected on the thumbnail selection screen 
is displayed.
Buttons for individual display operation
Buttons Description
c /
d Go to the previous/next photo in the same 
directory.
RETURN Return to the thumbnail selection screen.
A (red) Rotate the photo by 90 degrees to the left.
B (green) Rotate the photo by 90 degrees to the right.
•  Rotating photos only applies to the temporarily selected 
item and this setting is not saved.
•  The key guide display disappears automatically after a  particular time has elapsed. To display the key guide 
display again, press DISPLAY.
Slide Show
The photos displayed on the thumbnail selection 
screen are displayed as a slide show.
Buttons for slide show operation
Buttons Description
RETURN Return to the thumbnail selection screen.
D (yellow) Display the USB MENU screen.
•  The selected BGM is played repeatedly.
•  The slide show continues until you press RETURN.
•  For setting the slide show speed, select "Select Slide Show 
Interval" on the USB MENU screen.
•  The key guide display disappears automatically after a  particular time has elapsed. To display the key guide 
display again, press DISPLAY.
-$-&6@&JOEC





 
						

							44
Enjoying Photo/Music/Video Playback
USB Menu
Remove USB Device
[10sec]
Select Slide Show Interval
Select Slide Show BGM
Set All Slide Show Image
Reset All Slide Show Image USB MENU
Example
■
 Select Slide Show Interval
Specify the length of time before the next image 
appears.
1   Press D to display the USB MENU screen.
2   Press  a
/b  to select "Select Slide Show Interval", 
and then press ENTER.
3 Press a /b to select "5sec","10sec","30sec" or 
"60sec",and then press ENTER.
•  Depending on the photo fi les, the length of the slide show  interval may differ from the selected interval time.
■ Select Slide Show BGM
You can select the music to be played in the 
background while the slide show is being displayed.
1   Press D to display the USB MENU screen.
2   Press  a
/b  to  select "Select Slide Show BGM", 
and then press ENTER.
•  The list screen is displayed.
•  You can display the list screen by pressing B on the 
thumbnail selection screen.
3  Select the music.•  Checkmarks are added to the selected music.
...
...music 5music 4music 2music 1music 3SONG_01.MP3
SONG_02.MP3
SONG_03.MP3
SONG_04.MP3
SONG_05.MP3
SONG_06.MP3
SONG_07.MP3 3:42
4:55
4:08
4:20
3:55
4:26 4:35I
I
I
I
I
I I
SONG_03.MP3
0:14 / 4:35
Example
Buttons for slide show BGM select operation
Buttons Description
a /b /c
/d
Select a desired item.
ENTER Play music.
RETURN Return to the previous process.
A (red) Select the music to be played back. Press 
this button to add or remove a checkmark.
B (green) Stop music.
C (blue) Play/Pause music.
D (yellow) Display the USB MENU screen.
4   Press RETURN to display the thumbnail selection 
screen, and then press C to start the slide show 
and the background music.
•  All of the music fi les are selected by default.
■ Set/Reset All Slide Show Image
Set or reset the images to be displayed.
1   Press D to display the USB MENU screen.
2   Press a /b to select "Set All Slide Show 
Image"/"Reset All Slide Show Image", and then 
press ENTER.
•  When you select "Set All Slide Show Image", 
checkmarks are added to all the images.
•  When you select "Reset All Slide Show Image", remove  all the checkmarks from all the images.
...
...picture 5picture 4picture 2picture 1picture 3
Example
3   Press C to start the slide show.
■  Remove USB Device
1   Press D to display the USB MENU screen
2   Press a
/b to select "Remove USB Device", and 
then press ENTER.
3   Press  c
/d
 to select "Yes"/"No", and then press 
ENTER.
•  When you select "Yes", the USB device can be safely 
removed.
-$-&6@&JOEC





 
						

							45
Enjoying Photo/Music/Video Playback
Music Mode
...
...music 5music 4music 2music 1music 3SONG_01.MP3
SONG_02.MP3
SONG_03.MP3
SONG_04.MP3
SONG_05.MP3
SONG_06.MP3
SONG_07.MP3 3:42
4:55
4:08
4:20
3:55
4:26 4:35I
I
I
I
I
I I
SONG_03.MP3
0:14 / 4:35
Example
Buttons for music mode
Buttons Description
a /b /c
/d
Select a desired item.
ENTER Play music.
RETURN Return to the previous process.
A (red) Select the music to be played back. Press 
this button to add or remove a checkmark.
B (green) Stop music.
C (blue) Play/Pause music.
D (yellow) Display the USB MENU screen.
•  When there are invalid music fi les, the X mark will be 
displayed for the fi le.
•  The displayed play time may differ slightly from the actual  play time depending on the fi les.
USB Menu
Set All Auto Play
Reset All Auto Play USB MENU
Remove USB Device
Example
* See page 44 for details on the Remove USB Device  function.
■  Set/Reset All Auto Play
Set or reset the music to be played back.
1   Press D to display the USB MENU screen.
2   Press  a
/b  to select "Set All Auto Play"/"Reset All 
Auto Play", and then press ENTER.
•  When you select "Set All Auto Play", checkmarks are 
added to all the music fi les.
•  When you select "Reset All Auto Play", remove all the  checkmarks from all the music fi les.
3   Press C to play back the music.
*
Video Mode
...
...video 5video 4video 2video 1video 3VIDEO_01.avi
VIDEO_02.divx
VIDEO_03.divx
VIDEO_04.avi
VIDEO_05.divx
VIDEO_06.divx
VIDEO_07.avi 3:42
4:55
4:08
4:20
3:55
4:26 4:35I
I
I
I
I
I I
Example
Buttons for fi le selecting operations
Buttons
Description
a /b /c
/d
Select a desired item.
ENTER When selecting a video fi le: Play the
video.
RETURN Return to the previous process.
A (red) Select/deselect items (checkmarks are 
addded to the selected items).
D (yellow) Display the USB MENU screen.
Buttons for playing mode
Buttons Description
a Go to the beginning of a fi le by pressing  a
once and the previous fi le by pressing  a
twice.
b Go to the next fi le.
d
The fast forward speed changes every time 
you press d. After playing to the end, the TV 
goes to the next fi le and starts to play.
c The reverse speed changes every time you 
pressc
. After going back to the beginning, 
the TV starts to play the same fi le.
ENTER Pause the video.
RETURN Go back to the fi le selection screen.
A (red) Jump to the scene where playback was last 
stopped.
B (green) Stop a video.
C (blue) Display the USB operation panel.
D (yellow) Display the USB MENU screen.
0-9 Jump to a point in the video during playback 
of a fi le without chapters.
You can jump to a later point by pressing a 
higher number.*
* During playback of a fi le without chapters, playback points  are set automatically. Playback points are set at intervals of 
a one-tenth of playback time.
Example for a fi le with a playback time of 100 minutes:
Pressing 1 jumps 10 minutes forward, and pressing 2 jumps 
20 minutes forward. Pressing 0 returns to the start of the fi le 
being played back.
-$-&6@&JOEC





 
						

							46
■
 Using the operation panel
You can use the operation panel for video playback 
operations.
You can call up this operation panel by pressing 
MENU after you press 
a /b to select "USB Operation 
Panel" from "System Options" > "View Option".
PLAY
System Options0:04:11 / 0:07:42
Resume
Audio
CCTitle
jump
•Hold down to go in reverse.
d Starts playback.
ŒHold down to fast forward.Video without chapters: Press one time 
to return to the previous playback point.* 
Press two times to return to the previous fi le.Video with chapters: Press one time to 
return to the previous chapter. Press two 
times to return to the previous fi le.
)Sets pauses and still pictures./Video without chapters: Press one time to 
advance to the next playback point.* Press 
two times to display the next fi le.
Video with chapters: Press one time to 
advance to the next chapter. Press two 
times to display the next fi le.
Audio Change the audio when multiple audio is  available for the video you are watching.
+Playback stops.
CC Change the Closed Caption display.
Title Displays the title (edition).
Resume jump Jump to the scene where playback was  last stopped.
* During playback of a fi le without chapters, playback points  are set automatically. Playback points are set at intervals of a 
one-tenth of playback time.
Example for a fi le with a playback time of 100 minutes:
Playback points are set every 10 minutes. Pressing 
/one time after viewing the fi le for 15 minutes jumps to the 
20-minute playback point.
•  Reverse/fast forward continues from one fi le to another  during continuous playback.
•  Use "CC" on the operation panel to change the Closed  Caption display. You can also switch the Closed Caption 
display by using "System Options" > "View Option" > 
"Change CC" or by pressing CC on the remote control unit.
•  Use "Audio" on the operation panel to change the audio.  You can also switch the audio by using "System Options" > 
"View Option" > "Change Audio".
USB Menu
Menu for fi le selecting operations
Set All Auto Play
Reset All Auto Play USB MENU
Remove USB Device
Example
*  See page 44 for details on the Remove USB Device  function.
■  Set/Reset All Auto Play
Set or reset the video to be played back.
1   Press D to display the USB MENU screen.
2   Press  a
/b  to select "Set All Auto Play"/"Reset All 
Auto Play", and then press ENTER.
•  When you select "Set All Auto Play", checkmarks are 
added to all the video fi les.
•  When you select "Reset All Auto Play", remove all the  checkmarks from all the video fi les.
3   Press ENTER to play back the video.
Menu for playing mode
Chapter
Show Video Information
Title (Edition) USB MENU
Remove USB Device
Example
*  See page 44 for details on the Remove USB Device  function.
■  Title (Edition)/Chapter
Select the title or chapter you want to play back.
1   Press D to display the USB MENU screen.
2   Press  a
/b  to select "Title (Edition)" or "Chapter", 
and then press ENTER.
3   Press  a
/b  to select the desired title or chapter, 
and then press ENTER.
•  The selected title or chapter is played back.
•  "0-9" is displayed for fi les without chapters. Playback 
jumps to the playback point of the selected number.
•  If there is Edition information, this screen is displayed when 
the title is selected.
•  If there is no title or edition, you cannot select "Title  (Edition)".
•  "Chapter" cannot be selected when there is no chapter.
■  Show Video Information
The information of the current fi le is displayed.
1   Press D to display the USB MENU screen.
2   Press  a
/b  to select "Show Video Information", 
and then press ENTER.
*
*
Enjoying Photo/Music/Video Playback
-$-&6@&JOEC





 
						

							47
DivX® Setup
This is the function to confi rm your registration code. 
You need to register the code at http://www.divx.com.
1Press MENU to display the menu screen.
2Pressc
/d
 to select "Initial Setup", and then press 
ENTER.
3Press a
/b  to select "DivX® Setup", and then 
press ENTER.
■  DivX
® VOD registration
You can fi nd your registration code on this menu. You
need to register the TV at http://www.divx.com before 
playing the DivX content.
■  DivX
® VOD deregistration
You can fi nd your deregistration code on this menu. 
You need to deregister the TV at http://www.divx.com 
to release the registration.
USB Device Compatibility
USB device USB Memory, USB card reader (Mass 
Storage class), USB hard drive
File system FAT/FAT32/NTFS (USB hard drive only)
Photo fi le 
format JPEG (.jpg) (DCF2.0 compliant)
Music fi le 
format MP3 (.mp3)
Bitrate: 32k, 40k, 48k, 56k, 64k, 80k, 
96k, 112k, 128k, 160k, 192k, 224k, 
256k, 320kbps
Sampling frequency: 32k, 44.1k, 48kHz
Video fi le format
File
extension Container Video
Audio
.avi AVI
DivX 3.11/4.x/5.1/6.0XviD
H.264
MPEG4
Motion Jpeg MP3
Dolby Digital LPCM
ADPCM
.mkv MKV
DivX 3.11/4.x/5.1/6.0XviD
H.264
MPEG4 MP3
Dolby Digital LPCM
ADPCM
.asf
.wmv ASF
DivX 3.11/4.x/5.1/6.0XviD
MPEG4 VC-1
Windows Media Video v9
MP3
Dolby Digital LPCMWMA
.mp4 .mov .3gp MP4
(SMP4) H.264
MPEG4
Motion Jpeg MP3
AAC
.vro
.mpg
.mpeg PS
MPEG2
MPEG1 Dolby Digital
MPEGLPCM
•  Progressive format jpeg fi les are not supported.
•  USB 1.1 devices may not be played properly.
•  Operation using USB hubs is not guaranteed.
•  Some video fi le formats may not be played depending on 
the fi le.
•  Some images may not be displayed in the appropriate  aspect ratio depending on the fi le format.
Enjoying Photo/Music/Video Playback
-$-&6@&JOEC





 
						

							48
Playing Back Files on a Home 
Network (DLNA) Server
Photo Mode
Viewing Thumbnails
/Root/Pictures/Folders/Pictures
Photo2
FolderBFolderA
FolderA
Example
Buttons for thumbnail operations
ButtonsDescription
a /
b /
c /
d Select a desired item.
ENTER When selecting a folder icon: Enter this 
directory.
When selecting a photo thumbnail: Enlarge 
the photo.
RETURN Return to the previous process.
C (blue) Start the slide show.
D (yellow) Display the Home Network (DLNA) Menu 
screen.
•  You can see the fi le name, shooting date, fi le size and pixel 
size of the selected photo in the lower-left corner of the 
screen (shooting date is only available in the EXIF fi le format).
Viewing Individual Photos
The photo selected on the thumbnail selection screen 
is displayed.
Buttons for individual display operation
Buttons Description
c /
d Go to the previous/next photo in the same 
directory.
RETURN Return to the thumbnail selection screen.
A (red) Rotate the photo by 90 degrees to the left.
B (green) Rotate the photo by 90 degrees to the right.
•  Rotating photos only applies to the temporarily selected 
item and this setting is not saved.
Slide Show
The photos displayed on the thumbnail selection 
screen are displayed as a slide show.
Buttons for slide show operation
Buttons Description
RETURN Return to the thumbnail selection screen.
D (yellow) Display the Home Network (DLNA) Menu 
screen.
•  The slide show continues until you press RETURN.
•  For setting the slide show speed, display the Home 
Network (DLNA) Menu screen.
Home Network (DLNA) Menu
Home Network (DLNA) Menu
10sec
60sec 30sec
5sec
Example
■ Select Slide Show Interval
Specify the length of time before the next image 
appears.
1   Press D to display the Home Network (DLNA)  Menu screen.
2 Press a /b to select "5sec","10sec","30sec" or 
"60sec",and then press ENTER.
•  Depending on the photo fi les, the length of the slide show  interval may differ from the selected interval time.
Enjoying Photo/Music/Video Playback
-$-&6@&JOEC