Sharp LC-70LE735U Hdtv Owners Guide

							29
On-Screen Display Menu
Audio Settings
You can adjust the sound quality to your preference 
with the following settings.
Example
[Off]Clear Voice
MenuAudio
Settings
Auto Volume
[Off]
Bass[0]a15
b15
Treble[0]a15b15
Balance[    0] L
R
3D Surround[Off]
Bass Enhancer[On]
Reset Audio Settings
1 Press MENU to display the MENU screen, and then 
press
c/
d to select "Audio Settings".
2 Press 
a/
b to select a specifi c adjustment item.•  Select "Auto Volume", "3D Surround", "Bass Enhancer" 
or "Clear Voice", and then press ENTER to set each 
item.
3 Press 
a/
b (or 
c/
d) to select the desired setting, 
and then press ENTER.
4 Press MENU to exit.
Selected item
cbutton
dbutton
TrebleFor weaker treble For stronger treble
BassFor weaker bass For stronger bass
BalanceDecrease audio 
from the right 
speakerDecrease audio 
from the left 
speaker
•Audio menu is grayed out when "Output Select" is set to 
"Variable". (See page 32.)
•For resetting Audio adjustment items to the factory preset 
values, press 
a/
b to select "Reset", press ENTER, press 
a/
b to select "Yes", and then press ENTER.
Auto Volume
Different sound sources sometimes do not have the
same loudness level, such as a program and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
High:Reducing the loudness gaps among different 
sound sources strongly.
Middle:
Low:Reducing the loudness gaps among different 
sound sources slightly.
•Audio Settings menu is grayed out when "Output Select" is 
set to "Variable". (See page 32.)
3D Surround
The surround function produces Surround effect from 
the speakers.
3D Hall: Reproducing concert hall experience with 
realistic live surround sound using measured 
reverberant sound in the concert hall.
3D Movie: Reproducing movie theater experience 
with realistic live surround sound using measured 
reverberant sound in the movie theater.
3D Standard: Creating 3 dimensional surround sound 
with detailed control of the signal phase.
Normal: Providing mild surround sound.
Off: Outputs the normal sound.
•Audio Settings menu is grayed out when "Output Select" is 
set to "Variable". (See page 32.)
•For some discs, setup may be required on your DVD/BD 
player. In this case, please refer to the operation manual of 
your DVD/BD player.
Bass Enhancer
This function allows you to enjoy bass-enhanced sound.On:Bass Enhancer function is on.
Off:Normal sound.
•Audio Settings menu is grayed out when "Output Select" is 
set to "Variable". (See page 32.)
Clear Voice
This function emphasizes speech against background
noise for greater clarity.
•Audio Settings menu is grayed out when "Output Select" is 
set to "Variable". (See page 32.)
-$-&6@&JOEC


-$-&6@&JOEC








 
						

							30
Power Control
Power control setting allows you to save energy.
Power
ControlMenu
Audio Only
No Signal Off Power Saving
No Operation Off
[Disable][Enable] [    Standard]
Power Control
Example
1 Press MENU to display the MENU screen, and then 
press
c/
d to select "Power Control".
2 Press 
a/
b to select a specifi c adjustment item, 
and then press ENTER.
3 Press 
a/
b (or 
c/
d) to select the desired setting, 
and then press ENTER.
4 Press MENU to exit.
•  Skip this step for "Audio Only".
Audio Only
When listening to music from a music program, you 
can turn the screen off and enjoy audio only.
On:Audio is output without screen image.
Off:Both screen images and audio are output.
•The screen image will return to normal when a button 
(except those for audio adjustment, such as VOL, MUTE)
is pressed.
On-Screen Display Menu
Power Saving
This function allows you to set the Power Saving level 
in order to decrease the power consumption and 
increase the backlight lifespan.
Standard: Optimizes power reduction based upon video 
content. When set to "Standard", "" appears on the 
screen.
Advanced: Optimizes power reduction based upon video 
content and engages OPC. When set to "Advanced", 
"
" appears on the screen.
Off: This function does not work.
•"Power Saving" does not function when you set AV MODE 
to"AUTO" or "DYNAMIC (Fixed)".•You cannot select a different Power Saving item for each 
AV MODE.
When "Power Saving" is set, the "OPC" settings for all AV 
Modes will automatically change.
—If you set "OPC" to "On" when "Power Saving" is set to 
"Standard", then the "Power Saving" setting will change 
to "Advanced".
—When you change the "Power Saving" setting from 
"Advanced" to "Off" or to "Standard", "OPC" will be set 
to "Off".
—"AUTO" and "DYNAMIC (Fixed)" will remain set to "Off".
•
When "Power Saving" is set to "Standard" or "Advanced", 
the Power Saving leaf icon appears to the left of "OPC" in 
the Picture Settings menu screen.
•You can select Power Saving by pressing POWER
SAVING on the remote control unit. (See page 22.)
•  "Power Saving" is not available when the TV is in 3D mode.
No Signal Off
This function allows the TV to automatically shut the 
power down when there is no signal received.
Enable: The power will automatically shut down if there is 
no signal for 15 minutes.
Disable: This function does not work.
•When it is 5 minutes before the power shuts down, the 
remaining time will start to keep appearing every minute.
•When a TV program fi nishes, this function may not operate.
No Operation Off
This function allows the TV to automatically shut the 
power down when there is no operation.
Enable: The power will automatically shut down if there is 
no operation for 3 hours.
Disable: This function does not work.
•When it is 5 minutes before the power shuts down, the 
remaining time will start to keep appearing every minute.
-$-&6@&JOEC


-$-&6@&JOEC








 
						

							31
On-Screen Display Menu
System Options
Menu
View Option System Options
3D Setup
Input Terminal Setting AQUOS LINK Setup
Menu Design
Operation Lock Out
[Off]
Icon Light Up Setting
Demo ModeSystem
Options[On]
Example
1 Press MENU to display the MENU screen, and then 
press
c/
d to select "System Options".
2 Press 
a/
b to select a specifi c adjustment item and 
then press ENTER.
3 Press 
a/
b (or 
c/
d) to select the desired setting, 
and then press ENTER.
4 Press MENU to exit. 
View Option
These functions are useful for adjusting the audio 
and video settings. The View Option functions can be 
operated with the remote control unit.
APPS
The application window can be displayed by selecting 
"APPS" on the MENU screen.
•  You can display the application window by pressing APPS
on the remote control unit. (See page 22.)
View Mode
This function changes the screen size. 
Select "View Option" on the menu to display the View 
Mode menu screen. 
The View Mode menu varies depending on the input source.
•  You can select View Mode by pressing VIEW MODE on 
the remote control unit.
— See page 24 for adjusting the video being input from a 
TV, other audiovisual equipment, USB-Video, DLNA-
Video or Internet applications.
—
See page 61 for adjusting the video being input from a PC.
Freeze
Allows you to capture and freeze a moving image that 
you are watching.
• You can select Freeze by pressing FREEZE on the remote 
control unit. See page 21 for details of Freeze function.
Change Audio
Allows you to change the audio when multiple audio is 
available for the program you are watching.
■ MTS/SAP stereo mode
The TV has a feature that allows reception of sound 
other than the main audio for the program. This feature 
is called Multi-channel Television Sound (MTS). The TV 
with MTS can receive mono sound, stereo sound
and Secondary Audio Programs (SAP). The SAP feature 
allows a TV station to broadcast other information, 
which could be audio in another language or something 
completely different like weather information.
You can enjoy Hi-Fi stereo sound or SAP broadcasts 
where available.
•Stereo broadcasts: View programs like live sporting 
events, shows and concerts in dynamic stereo sound.
•SAP broadcasts: Receive TV broadcasts in either MAIN 
or SAP sound. 
MAIN sound: The normal program soundtrack (either in 
mono or stereo). 
SAP sound: Listen to a second language, supplementary 
commentary or other information. (SAP is mono sound.)
If stereo sound is diffi cult to hear.
•  Obtain a clearer sound by manually switching to fi xed 
mono-sound mode.
You can change MTS as shown below to match the 
television broadcast signal.
PressENTER to toggle between audio modes.
Examples: when receiving MTS and SAP
STEREO mode: 
STEREO MONOSTEREO + SAP mode: ST(SAP)  SAP(ST)    MONO
MAIN + SAP mode: MAIN           SAPMONO mode: MONO
■ Digital broadcasting audio modeThe types of audio transmitted in a digital broadcast include 
SURROUND as well as MONO and STEREO. In addition, it 
is possible for multiple audio tracks to accompany a single 
video track.
PressENTER to toggle between audio modes.
Example: when receiving Digital broadcasting
STEREO (Audio1)  STEREO (Audio2)
               SURROUND (Audio3)
•  MTS only operates while in TV mode.
-$-&6@&JOEC


-$-&6@&JOEC








 
						

							
32
Change CC
Allows you to change the Closed Caption display.
Select "Change CC" on the menu to display the Closed 
Caption information.
•  The information displayed varies depending on the program  you are watching.
•  You can change Closed Caption by pressing  CC on the 
remote control unit. See page 23 for details of Closed 
Caption function.
Input Terminal Setting
Audio Setup
You can output digital audio to an AV amplifi er or 
similar device whose DIGITAL AUDIO INPUT terminal 
is connected to the DIGITAL AUDIO OUTPUT terminal 
on the TV. Please select an audio output format 
compatible with the audio format of the program you 
are watching and the equipment connected.
PCM: The optical output terminal outputs audio signal 
in PCM form. If your digital audio system does not 
support Dolby Digital, select "PCM".
Dolby Digital:  The optical output terminal outputs audio 
signal in Dolby Digital form. It reproduces sound from 
surround program of digital.
Input Skip
This setting allows you to skip the TV, HDMI or PC IN 
Input ("TV", "PC IN", "HDMI 1", "HDMI 2", "HDMI 3" 
and "HDMI 4") on the Input Selection operation.
Yes:  Skips the input.
No:  Does not skip input.
Input Label
Lets you set the input terminal displayed when using 
the INPUT list or channel display. Press 
a/
b /
c /
d to 
select the new name for the input mode.
•  Using the software keyboard, you can enter up to  10 characters for text. (See page 69.)
•You cannot change labels if the input source is TV, Home 
Network (DLNA) or USB.
HDMI Setup
To watch an HDMI or PC IN equipment image, select 
"HDMI 1", "HDMI 2", "HDMI 3" or "HDMI 4" from the 
INPUT list using  INPUT on the remote control unit or 
on the TV.
Auto View: 
Enable:  To use View Mode based on signal 
recognition, including an HDMI signal.
Disable: No function.
•Refer to your external equipment operation manual for the 
signal type.
•When connecting a DVI-HDMI conversion adapter/cable to 
the HDMI terminal, the image may not come in clearly.
Output Select
Allows you to select what controls the audio output.
Fixed: Sound via speaker is adjusted with  VOL
k/
l  on 
the remote control unit or on the TV.
  Sound via the AUDIO OUT terminal is not adjustable  and outputs at a consistent level.
Variable:  Sound via the AUDIO OUT terminal is adjusted 
with VOL
k/
l  on the remote control unit or on the TV.
  Sound via speaker is muted.
Color System
Select the video signal system compatible with your 
equipment from the list below:
Auto/NTSC/PAL-M/PAL-N
•"Color System" can only be set for the VIDEO 1 or 2.•If you have already set the Secret No., input the 4-digit 
secret number here. See page 35 for setting a secret 
number.
Menu Design
Channel Selecting Effect
You can select whether to use transition effects when 
changing channels.
Yes:  A transition effect is used when the channel is 
changed.
No: No function.
•  In some cases, "Channel Selecting Effect" does not work.
Program Title Display
Select the CH display when changing channels for 
digital broadcasting.
Yes: "Program Info." displays.
No: "Program Info." does not display.
Position
For adjusting a picture's horizontal and vertical 
position.
H-Pos.: Centers the image by moving it to the left or 
right.
V-Pos.: Centers the image by moving it up or down.
•For resetting adjustments to the factory preset values, 
press
a/
b  to select "Reset", and then press 
ENTER.
•When connecting a PC to the HDMI terminal, the image 
position will be automatically adjusted. It cannot be 
manually adjusted.
•The screen position variable ranges depend on the View 
Mode or the signal type. The ranges can be seen on the 
position-setting screen.
•Adjustments are stored separately according to input 
source.
•  "Position" does not work when USB mode, Home Network  (DLNA) mode or an Internet application is used.
•  You may not be able to adjust the position while in 3D  mode.
On-Screen Display Menu
-$-&6@&@JOEE


-$-&6@&@JOEE








 
						

							
33
Caption Setup
This function allows you to adjust the closed caption 
screen appearance to suit your preference. You can 
adjust 7 items: "Caption Size", "Font Style", "Foreground 
Color", "Foreground Opacity", "Background Color", 
"Background Opacity" and "Character Edge".
Example:Selectable items available for "Font Style". Default: The font specifi ed by broadcasting station or 
default font.
Type 0:  Proportional font used in the MENU screen.
Type 1:  Monospaced with serifs.
Type 2:  Proportionally spaced with serifs.
Type 3:  Monospaced without serifs.
Type 4:  Proportionally spaced without serifs.
Type 5:  Casual font type.
Type 6:  Cursive font type.
Type 7:  Small capitals.
•For resetting adjustments to the factory preset values, 
press
a/
b  to select "Reset", and then press 
ENTER.
•The default value depends on the broadcasting station.
Game Play Time
This function displays the elapsed game time so you 
do not lose track of the time. To display the elapsed 
time, select "GAME" for the AV MODE before starting 
the game.
On:The elapsed time is displayed every 30 minutes when 
you switch to GAME mode in external input mode.
Off: No adjustment.
Operation Lock Out
This function locks the operation buttons on the TV 
and the remote control.
Off:No adjustment.
RC Control Lock:  All buttons on the remote control are 
locked.
Button Control Lock:  All buttons on the TV, except 
POWER , are locked.
When “RC Control Lock” or “Button Control Lock” is 
selected, a confi rmation screen appears.
On: Locks the operation buttons.
Off:  No adjustment.
•  To unlock the buttons on the remote control by using the 
control panel of the main unit (see page 25):
1Press MENU  to display the MENU screen, and then
 press  VOL
k/
l  to select "System Options".
2Press
CHU/V to select "Operation Lock Out", and
 then press  INPUT.
3 Press CHU/V to select "Off", and then press 
INPUT.
4 Press  MENU  to exit.
•To unlock the buttons on the TV, press  MENU on the 
remote control, and then select "Off" in "Operation Lock 
Out".
Icon Light Up Setting
When this function is set to "On", the LED on the front 
of the TV turns on.
•  The LED lights white in 2D mode.•  The LED lights blue in 3D mode.
•  "On" is the factory preset value. If you want to turn off the  LED, set the function to "Off".
Demo Mode
You can select the image from several types of demo 
mode.
70" Size Comparison/3D/Quattron/Quad Pixel Plus/
AquoMotion240/Connected TV/Feature Demo/
Auto Play
If you have selected "Auto Play", you need to select the 
desired playback type(s), and then set the playback time.
 Continuous:  Play Demos continuously.
 10 min.:  Play Demos every 10 minutes.
 20 min.:  Play Demos every 20 minutes.
•This function will be canceled when you press  EXIT on the 
remote control unit.
•When "Demo Mode" is set to "70" Size Comparison", 
"Quattron", "Connected TV" or "Feature Demo", pressing 
FREEZE  pauses/restarts demo.
•"Demo Mode" may not be selected depending on input 
signal type or application status.
•"Demo Mode" may be automatically canceled depending 
on input signal type.
On-Screen Display Menu
-$-&6@&@JOEE


-$-&6@&@JOEE








 
						

							34
Initial Setup
Example
Menu
EZ Setup
Internet Setup
Language
DivX® Setup Broadcasting Setup
Individual Setup
Wall Mount Audio Setup
Reset
FAV APP Key Assign Initial SetupInitial
Setup[No] [English]
1 Press MENU to display the MENU screen, and then 
press
c/
d to select "Initial Setup".
2 Press 
a/
b to select a specifi c adjustment item, 
and then press ENTER.
•  When you select "EZ Setup", "CH Setup", "Parental 
CTRL" or "Reset", you can enter the 4-digit secret 
number here. See page 35 for setting a secret number.
3 Press 
a/
b (or 
c/
d) to select the desired setting, 
and then press ENTER.
4 Press MENU to exit.
EZ Setup
You can run EZ Setup again, even after setting up the 
preset channels.
Language:Select from among 3 languages (English, 
French and Spanish).
TV Location: Select "Home" or "Store" for the location 
where you plan to install the TV. This product qualifi es 
for ENERGY STAR in Home mode default setting.
Home: “Power Saving” is set to "Advanced", and AV MODE is 
set to "STANDARD".
Store:
“Power Saving” is set to "Off" and AV MODE is set to 
"DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set.
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)" 
regardless of whether Picture Reset is "On" or "Off". If you 
select "On", AV MODE will be reset to "DYNAMIC (Fixed)" 
if there is no operation for 30 minutes. When "Off" is 
selected, AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When “On” is selected, after all the settings 
are completed, the Feature Demo screen is displayed if 
there is no operation for several minutes.
•  ENERGY STAR qualifi cation is based on AV MODE 
"STANDARD".
Antenna & Cable/STB: Select the type of connection 
you will use to watch TV.
Air/Cable:Make sure what kind of connection is made 
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for 
all channels viewable in the set area.
•  If "Cable" is selected for Antenna setting, scrambled 
channels are removed after the Channel search has been 
completed.
Completed:The settings confi rmation screen is displayed. 
Confi rm the information displayed on the screen.
•See Initial Installation on pages 18 to 20 for setting each item.•If no channel is found, confi rm the type of connection 
made with your TV and try "EZ Setup" again.
•If you select "Analog Search Start" and initiate the channel 
search, the CH Memory for Cable Digital will be deleted.
Broadcasting Setup
CH Setup
If Initial Installation does not memorize all the channels 
in your region, follow the instructions below to manually 
memorize the channels.
Air/Cable:Make sure what kind of connection is made 
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for 
all channels viewable in the set area.
CH Memory: You can select the channels to skip in each 
ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and 
DIGITAL (Cable).
On:Skips channels. (Channel selection disabled using CH
U/
V.)
Off:Does not skip channels. (Channel selection enabled using 
CH
U/
V.)
Remove Scrambled CH: This function makes the TV 
look for and then delete digital cable channels that 
are scrambled and so unavailable in the set area. The 
process may take more than 20 minutes.
Yes: Starts to remove scrambled channels.
No: This function does not work.
•See Initial Installation on pages 18 to 20 for setting each item.•If no channel is found, confi rm the type of connection 
made with your TV and try channel search again.
•If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
On-Screen Display Menu
-$-&6@&JOEC


-$-&6@&JOEC








 
						

							35
Favorite CH (Favorite Channel Setting)
This function allows you to program 4 favorite 
channels, in 4 different categories. By setting the 
favorite channels in advance, you can select your 
favorite channels easily.
To register your favorite channel:
  Select "Register" and then press ENTER. Press 
a/
b/
c/
d to select the position in the category, and then press 
ENTER to register.
To delete your favorite channel:
  Select "1 Data Clear" and then press ENTER. Press 
a/
b/
c/
d to select the channel you want to delete, and 
then press ENTER. Select "Yes" and then press ENTER.
  To delete all the favorite channels, select "All Data Clear".
•Before setting the channel, select the channel you want to 
register as a favorite channel.
•You can display the "Favorite CH" screen by pressing 
FAVORITE CH on the remote control.
Antenna Setup-DIGITAL
In order to receive digital air broadcasts, you need 
a digital broadcast antenna. You can confi rm the 
antenna confi guration through the "Antenna Setup-
DIGITAL" screen. If necessary, adjust the direction of 
the antenna to obtain the maximum signal strength.
Signal Strength: The signal strength of DIGITAL channel 
is displayed. The signal information is based on the 
current channel.
Channel Strength: Input the 2-digit channel number 
to check the signal strength of the selected channel. 
Make sure the signal is strong enough for each 
channel.
•  This function is available for DIGITAL (Air) only.
Language
You can also select a language from the Initial Setup 
menu. Select from among 3 languages: English, 
French and Spanish.
Wall Mount Audio Setup
This selects the optimal audio for the program you are 
currently watching even when the TV is mounted to a 
wall.
Yes:Selects the optimal audio.
No:No adjustment.
FAV APP Key Assign
You can assign your favorite applications to the FAV
APP 1,2, and 3 buttons on the remote control. After 
assigning an application to a button, you can press 
that button to display the top screen of the assigned 
application.
Current Setup: Checks the current setting.
APP1/APP2/APP3:You can assign your favorite 
applications displayed on the screen to these buttons.
•  For resetting adjustments to the factory preset values, 
press
a/
b to select "Reset", and then press ENTER.
Reset
If complex adjustments are made and the settings 
cannot be restored to normal, you can reset the 
settings to the factory preset values.
•If you have already set the Secret No., input the 4-digit 
secret number here.
•The Channel Setup settings will not be changed.•The Language settings will not be changed.•The Secret number settings will not be changed.•The TV Location settings will not be changed.
Individual Setup
Secret No.
Allows you to use a secret number to protect certain 
settings from being accidentally changed.
IMPORTANT:
Three conditions must be met to enable the V-Chip (see 
pages 36 to 37):
1.Secret No. is registered.
2.V-Chip/V-Chip (DTV Only) settings have been made.•  The “V-Chip (DTV Only)” will only be selectable when a new 
rating system can be downloaded via digital broadcasting in the 
U.S.
3. "Status" is set to "On".
■Setting the Secret No.
You can set and change the secret number by using 
0-9.
Yes:Changes or sets the Secret No.
No:The confi rmation screen to clear the Secret No. 
appears when the Secret No. has been set. When the 
Secret No. has not been set, the previous screen will 
be displayed.
■Secret No. ClearYou can clear your secret number.Yes:Your secret number is cleared.
No:Your secret number is not cleared.
•As a precautionary measure, make a note of your secret 
number and keep it in a familiar place.
•If the secret number is cleared, the Status setting 
automatically sets to "Off". "V-Chip" and "Status" will not 
be selectable from the menu.
Parental CTRL
(Parental Control Setting)
Status
Used to enable or disable the parental control function. 
This function will not be selectable from the menu if 
you do not fi rst confi gure your secret number.
On:Enables Parental CTRL.
Off:Disables Parental CTRL.
On-Screen Display Menu
-$-&6@&JOEC


-$-&6@&JOEC








 
						

							36
V-Chip
V-CHIP is an electronic fi ltering device built into your 
TV. This tool gives parents a great degree of control 
over broadcasts accessed by their children. It allows 
parents to select programs judged suitable for child 
viewing while blocking ones judged not suitable. It 
does so automatically once you activate the V-CHIP 
feature in your TV. "V-Chip" and "Status" will not be 
selectable from the menu if you do not fi rst confi gure 
your secret number.
•The U.S. has two rating systems for viewing content: TV 
Parental Guidelines and movie ratings.
•The TV Parental Guidelines work in conjunction with the 
V-CHIP to help parents screen out inappropriate television 
shows from their children.
•Movie ratings are used for original movies rated by the 
Motion Picture Association of America (MPAA) as watched 
on cable TV and not edited for television. The V-CHIP can 
also be set to block MPAA-rated movies.
•The setting automatically enters "Block" for any ratings 
below your selection.
•If Status is not set to "On", the confi guration settings will 
not work.
■MPAA (Voluntary movie rating system)
   ExampleMPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
PG-13
R
NC-17
X
NONE PG G
Press
a/
b to adjust the item to your desired position.
 "" indicates the item is blocked. Press MENU to exit.
G:General audiences. All ages admitted.
PG:Parental guidance suggested. Some material may not be 
suitable for children.
PG-13:Parents strongly cautioned. Some material may be 
inappropriate for children under 13.
R:Restricted. Under 17 requires accompanying parent or 
adult guardian (age varies in some jurisdictions).
NC-17:No one 17 and under admitted.
X:X is an older rating that is unifi ed with NC-17 but may be 
encoded in the data of older movies.
•Voluntary movie rating system only uses an age-based 
rating.
■ TV Parental Guidelines
   ExampleMPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
TV-G
TV-PG
TV-14
TV-MA
NONE TV-Y7 TV-Y
L
S
V
FVD
Press
a/
b to adjust the item to your desired position.
"" indicates the item is blocked. Press MENU to exit.
Suggested age
TV-Y: All children.
TV-Y7: Directed to older children.
TV-G: General audience.
TV-PG: Parental Guidance suggested.
TV-14: Parents strongly cautioned.
TV-MA: Mature audience only.
   Example
MPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
TV-G
TV-PG
TV-14
TV-MA
NONE TV-Y7 TV-Y
L
S
V
FVD
When setting an individual content-based rating item:
1 Press 
d or ENTER to access blocked content 
items from the currently selected age-based rating 
item.
2 Press 
a/
b to select an individual item, and then 
pressENTER to unblock it ("" is removed). Repeat 
the same steps for the other items.
3 Press 
c or RETURN to register after all individual 
content rating items are set.
Content
FV: Fantasy violence.
V: Violence.
S: Sexual situation.
L: Adult language.
D: Sexually suggestive dialog.
RatingContent
FV V S LD
Suggested
ageTV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
 : The content rating can be set, but this rating is not 
normally broadcast by TV stations.
 :  Content rating can be set.
On-Screen Display Menu
-$-&6@&JOEC


-$-&6@&JOEC








 
						

							37
Canadian Rating Systems (Canadian English ratings 
and Canadian French ratings)
•The TV rating systems in Canada are based on the 
Canadian Radio-Television and Telecommunications 
Commission (CRTC) policy on violence in television 
programming.
•While violence is the most important content element to 
be rated, the structure developed takes into consideration 
other program content like language, nudity, sexuality and 
mature themes.
•When setting the V-CHIP on the Canadian system you 
can choose either the Canadian English ratings or the 
Canadian French ratings.
■ Canadian English Ratings
ExampleMPAA
TV Guidelines
Can. French RatingsE
C
C8+
G
PG
14+
18+
NONE
Can. English Ratings
Press
a/
b to adjust the item to your desired position. 
"" indicates the item is blocked. Press MENU to exit.
E: Exempt: Includes news, sports, documentaries and other 
information programming; talk shows, music videos, and 
variety programming.
C: Children: Intended for younger children under the age of 8 
years. Pays careful attention to themes that could threaten 
their sense of security and well-being.
C8+:Children over 8 years old: Contains no portrayal 
of violence as the preferred, acceptable, or only way 
to resolve confl ict; nor encourage children to imitate 
dangerous acts which they may see on the screen.
G:General: Considered acceptable for all age groups. 
Appropriate viewing for the entire family, contains very little 
violence, physical, verbal or emotional.
PG:Parental Guidance: Intended for a general audience, but 
may not be suitable for younger children (under the age of 8) 
because it could contain controversial themes or issues.
14+:Over 14 years: Could contain themes where violence 
is one of the dominant elements of the storyline, but it 
must be integral to the development of plot or character. 
Language usage could be profane and nudity present 
within the context of the theme.
18+:Adults: Intended for viewers 18 years and older and 
might contain depictions of violence, which while related to 
the development of plot, character or themes, are intended 
for adult viewing. Could contain graphic language and 
portrayals of sex and nudity.
■ Canadian French Ratings
Example
MPAA
TV Guidelines
Can. French Ratings Can. English Ratings
8ans+
13ans+
16ans+
18ans+
NONE G E
Press
a/
b to adjust the item to your desired position. 
"" indicates the item is blocked. Press MENU to exit.
E:Exempt programming.
G:General: All ages and children, contains minimal direct 
violence, but may be integrated into the plot in a humorous 
or unrealistic manner.
8ans+:General but inadvisable for young children: May 
be viewed by a wide public audience, but could contain 
scenes disturbing to children under 8 who cannot 
distinguish between imaginary and real situations.
  Recommended for viewing with parent.
13ans+:Over 13 years: Could contain scenes of frequent 
violent scenes and therefore recommended for viewing with 
parent.
16ans+:Over 16 years: Could contain frequent violent scenes 
and intense violence.
18ans+:Over 18 years: Only for adult viewing. Could contain 
frequent violent scenes and extreme violence.
■ How to temporarily release the V-CHIP BLOCK
When the V-CHIP BLOCK is working and censors a 
broadcast, "V-CHIP HAS BEEN ACTIVATED." displays.
1 Press ENTER while the V-CHIP is working, and 
then the secret number setting menu displays.
2  Input the 4-digit secret number by using 0–9. At this 
time V-CHIP BLOCK temporarily releases.
■  Reactivating the temporarily released V-CHIP 
BLOCK
You can reactivate the temporarily released V-CHIP 
BLOCK as shown below.
•Select "Status" setting from the Parental CTRL menu to 
reactivate BLOCK. (See page 35.)
•Select "V-Chip" setting ("MPAA", "TV Guidelines", "Can. 
English Ratings" or "Can. French Ratings") from the 
Parental CTRL to reactivate BLOCK. (See pages 36 to 37.)
•Switch off the TV power.
•Performing any of the three above will activate the V-CHIP 
BLOCK.
On-Screen Display Menu
-$-&6@&JOEC


-$-&6@&JOEC








 
						

							38
On-Screen Display Menu
Information
Example
Menu
Identification
Software Update Digital Caption Info.
Netflix Help
VUDU Help Information
Information
1 Press MENU to display the MENU screen, and then 
press
c/
d to select "Information".
2 Press 
a/
b to select a specifi c adjustment item, 
and then press ENTER.
3 Press 
a/
b (or 
c/
d) to select the desired setting, 
and then press ENTER.
4 Press MENU to exit.
Identifi cation
The current version of the TV software is displayed.
Digital Caption Info.
(Digital Caption Information)
This function allows viewing of digital closed caption 
information for the digital broadcast program being viewed.
•This list is not displayed for analog broadcasts or external 
input audio/video.
•This information is not included in CC1, CC2, Text1, or 
Text2, and is not displayed in a list.
Software Update
This is used to upgrade the system software to 
enhance the TV functions.
1 Press MENU to display MENU screen, and then 
press
c/
d to select “Information”.
2 Press 
a/
b to select “Software Update”, and then 
pressENTER.
•  If you have already set the Secret No., go to step 3.
Menu
Identification
Software Update Digital Caption Info. Information
Information
Example
3  Input the 4-digit secret number by using 0-9.
Software UpdateEnter your Secret No.
4 Press 
a/
b to select “Manual Update” or “Auto 
Update Setting”, and then press ENTER.
•  The operations thereafter vary depending on the setting.
Manual Update
Select the method for manually updating the software.
USB Update: Updates the software using a USB memory 
device containing the update fi le. (See pages 39 to 40.)
Network Update: Downloads the update fi le via the 
network and then updates the software. (See page 39.)
•  A broadband connection and Internet Setup are required to 
update the software using the network. (See pages 65 to 
68.)
•  It may take time to access and download the update 
depending on the Internet connection and other factors.
Auto Update Setting
When the TV is on, or when an Internet application 
is being accessed, this function enables the TV 
to connect to the network and check for updates 
automatically.
Yes: Enables Auto Update Setting.
No: Disables Auto Update Setting.
When an update is available, a message is displayed.
Pressc
/d
 to select "Yes", and then press ENTER to 
display the download screen. (See page 39.)
NoYe s
•  This function does not work when a broadband connection 
or Internet Setup is not available.
•  A message may also be displayed when an application is 
running.
  The message varies depending on the application.
-$-&6@&JOEC


-$-&6@&JOEC