Sharp Lc 52xs1e Operation Manual

AQUOS LINK
Open the remote control unit’s flip cover, and 
then press OPTION.
Press  a/b  to select “Setup Menu”, and then 
press  OK.
NOTE
If a connected device does not have this function or the 
device is in a status where the menu cannot be displayed 
(recording, entering standby, etc.), this function may not be 
available.
Playback of titles using AQUOS LINK
This section explains how to play back a title in the 
AQUOS BD Player/AQUOS Recorder. Open the remote control unit’s flip cover, and 
then...

Menu operation
1
Picture 
Contrast OPC [Off] 
Brightness
Colour
Tint
Sharpness
Advanced
Reset [+30] 
[0] 
[0] 
[0] 
[0] 
0 
–30 
–30 
–30 
–10  +40 
+30 
+30 
+30 
+10 
Backlight [+14] –16 
+16 
DYNAMIC
ECO
Energy Save
No Signal Off
No Operation Off
Sleep Timer [Off]
[Disable]
[Disable]
No
Ye s
3
2
NOTE“MENU” options differ in the selected input modes, but the operating procedures are the same.
The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may...

Basic adjustment
NOTEWhen set to “On”, the TV senses the surrounding light and 
automatically adjusts the backlight brightness. Make sure 
no object obstructs the OPC sensor, which could affect its 
ability to sense surrounding light.
• This TV provides various advanced functions for optimising 
the picture quality.
100Hz
Film Mode
Active Contrast
Gamma setup
DNR
Monochrome
Range of OPC
Y
G
C
B
M[    0]
[    0]
[    0]
[    0]
[    0]f
30
f 30
f 30
f 30
f 30e30
e 30
e 30
e 30
e 30
3D-Y/C
C.M.S.-Hue
This...

Basic adjustment
NOTEThe item marked with * is available only when selecting 
“HDMI1”, “HDMI2”, “HDMI3” or “EXT4” from the “INPUT 
SOURCE” menu.
The item marked with ** is available only when accepting 
an “x.v.Colour” signal through an HDMI terminal.
•
•
Monochrome
For viewing a video in black & white.
Range of OPC
The brightness level range of the OPC sensor’s automatic 
adjustments can be set according to your preferences. 
The adjustment range of the OPC sensor can be set to a 
maximum of 
e16 and a...

Power Save Settings
ECO
Energy Save
No Signal Off
No Operation Off
Sleep Timer  [       Standard]
[Disable] 
[Disable]
Basic adjustment
No Signal Off
ECO
When set to “Enable”, the TV will automatically enter 
standby mode if there is no signal input for 15 minutes.
Five minutes before the TV enters standby mode, the 
remaining time displays every minute.
NOTEEven if a TV programme finishes, this function may not 
operate because of interference from other TV stations or 
other signals.
•
•
Energy Save...

Channel Settings
Auto Installation
Basic adjustment
Auto Installation
Setup
The TV automatically detects and stores all available 
services in your area. This function also allows you to 
perform the channel setting for digital, satellite and 
analogue individually and reconfigure the settings after 
the initial auto installation has been completed.Press  c/d  to select “Yes”, and then press  OK.
Press  a/b /c /d  to select the desired 
language, and then press  OK.
You cannot set the Home/Store setting...

Basic adjustment
 35
Buttons for Manual Adjust operation
Lock: Press R button.When the service is locked, you must enter your PIN 
whenever you tune to the service.
CH Skip: Press G button.Services with a ✔ mark are passed over when pressing 
P r /s  on the Display or remote control unit.
Sort: Press B button.The item position of services can be sorted.
Press a/b  to select the service whose item 
position you want to move, and then press  OK.
DTV 994  ✔ 
SIT 2 
DTV 995  ✔
SIT 1 
Press  a/b  to move it...

Basic adjustment
Channels with “Skip” set to “On” are passed over 
when using Pr /s  even if selected while watching 
the image from the TV.
When connecting a decoder to the AVC System, you 
need to select “EXT1” or “EXT2”.
NOTE
The factory preset value is “Off”.
•
You can block the viewing of any channel.
NOTE
See “Child Lock” for setting a PIN.
When “Lock” is set to “On” for a channel, “Child lock has\
 
been activated” displays, and the image and sound of the 
channel are blocked.
When pressing  6...

Basic adjustment
Child Lock
Setup
Allows you to use a PIN to protect certain settings 
from being accidentally changed.
Change PIN
Register a four-digit password number to use the 
“Child Lock” function.Enter the four-digit number as a PIN using  0–9 
numeric buttons.
Enter the same four-digit number as in step 1 to 
confirm.
“The system PIN has been changed successfully” displays.
NOTETo view a locked channel, you must enter the PIN (See pages 35 
and 36 for locking channels from viewing in DTV, SAT...

Useful Viewing functions
WSS
Setup
WSS signal 4:3 screen
4:3 Mode
Setup
The “WSS” signal has 4:3 auto-switching that allows 
you to select between “Normal” and “Panorama”.4:3 mode “Panorama”
4:3 mode “Normal”
The “WSS” allows the TV to switch automatically 
among the different picture size.
NOTE
Use “WIDE MODE” if an image does not switch to the 
appropriate picture size. When the broadcast signal 
contains no “WSS” information, the function will not work 
even if enabled.
Selecting the WSS picture size...