Sharp Lc 52hd1e Operation Manual
Have a look at the manual Sharp Lc 52hd1e Operation Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Watching DVB broadcasts Software update TV base software and DVB software To ensure that your TV set is always up to date, from time to time SHARP will make updated TV base software and DVB software versions available. These updates are broadcast via satellite (only via ASTRA1). • This function is not available in some countries. Automatic search for new software via satellite The set automatically determines whether a new software version is available via satellite during the night when the EPG data are updated. However the TV set must remain in standby mode for this (do not switch off the set with the power switch). If a new software version has been found, the set informs you with an on-screen message the next time it is switched on (see right column – “Loading new software”). Manual search for new software via satellite If it is not automatically displayed that a new software is available when switching on the set, you can also run a manual search. The system first checks whether a software update is available via satellite.Press MENU and the TV menu screen displays. Press c/d to select “Setup”, and then press b to move down. Press c/d to select “Miscellaneous”, and then press b to move down. Press c/d to select “Software update”, and then press OK. • The software versions currently loaded in the set are listed. Software update -> Software type TV base software DVB software Press a/b to select the desired option, and then press OK to start the search. • If new versions are available then a subsequent screen message will be displayed. 1 2 3 4 5 Loading new software The following will appear if a new software is found via the search. Software update -> Update options Load new software now Load new software after switch off to standby Keep current software Proceed to the next steps by following the screen prompts. • A bar is displayed to inform you of the progress of the load process. During the loading process do not switch off your device via the power switch! This may last up to 20 minutes. You will be informed when it is finished. At the end of loading: Turn off the TV set off with the power switch, unplug the AC cord, and turn it on again. • If a new software has not been updated via satellite, you will be reminded of this several times after switching on the set. 6 7 29 LC -5 2H D1E -g b.i n dd 2 9LC-52HD1E-gb.indd 292008/0 3/2 4 1 5:0 1:1 82008/03/24 15:01:18
Watching DVB broadcasts Radio mode You can only receive radio stations via DVB. If you do not have DVB radio reception then you can play audio from an external device via the TV set using the audio/AV inputs. Press RADIO to activate the DVB radio mode. 18:00 - 18:10 Nachrichten Radio: Stereo EXT6 EXT5 • An overview of the radio stations displays. • Press RADIO again to exit the DVB radio mode. Switching the screen off and play the radio only Press RED to switch the screen off. To switch on the screen, press RED again. • You can still change channels with Pr /s or 0 - 9 on the remote control with the screen turned off. Using the Radio menu and EPG Just like in normal TV mode, with the radio menu you can set the sound, search for and store radio stations (automatically or manually), change stations and set switch-off/alarm functions. You can also call up the EPG screen for radio stations. Press RADIO to activate the DVB radio mode. Press MENU to display the radio menu screen. 1 2 30 LC -5 2H D1E -g b.i n dd 3 0LC-52HD1E-gb.indd 302008/0 3/2 4 1 5:0 1:1 92008/03/24 15:01:19
Info display and index feature We have designed the TV with integrated content- based information text for each item so that you do not have to worry about reading the operation manual each time. In conjunction with the index feature, this makes a convenient control system. Using info text Press INFO with the menu screen active.• You can see info text only when INFO icon is shown on the lower right corner of the screen. ENDINFO Setup Εxtended functions Picture Sound Recording TV menu AQUOS LINK setup Stations Child lock Timer functions Language Miscellaneous Here, you can search for stations automatically or manually as well as s\ et the menu language, timer functions, parental lock, on-screen displays, etc. Setup 1 Using Index Using Index, you can start all wizards and many operating functions directly from a single point. The complete functional scope of the TV set can thus be easily understood. Alphabetic sorting is preceded by the items “Language”, “Integrated features” and “Repeat initial installation”. Press INFO with no other menu screen active. If “OK” appears in the highlighted line, this function can be accessed directly with OK. -zaEND Index Language Integrated features Repeat initial installation AV (Audio/Video) AV equipment Decoder Camcorder Activate Previous/next letter Page Select letter In the "TV Menu->Setup->Language" menu you can select your language for operating the TV set. E Selecting keywords in the Index screen There are 3 ways to navigate from item to item in the index screen. 1 Select initial letters with 0 - 9 on the remote control like with a mobile phone keypad. 2 Press c/d to go to the preceding/next letters, or press a/b to go from line to line. 3 Press Pr /s to scroll the page up/down. 1 2 Menu operation 31 LC -5 2H D1E -g b.i n dd 3 1LC-52HD1E-gb.indd 312008/0 3/2 4 1 5:0 1:2 02008/03/24 15:01:20
Sound menu Various sound-related settings can be optimised. Sound TV menu DYNAMIC Treble Bass Loudness Dolby Virtual Speaker Auto volume 0 0 off on off off Balance 0 AV output signal Sound 1+2 Headphone volume 50 Switch on volume 30 Volume adjustment for current station 0 ResetRecording Connections Setup Εxtend ✔ Sound menu items Items Treble* Bass* Loudness Dolby Virtual Speaker (See page 33 for its functions.) Auto volume Balance Loudspeaker sound AV output signal Headphone volume Switch on volume Volume adjustment for current station Reset NOTE • Items with * can be adjusted and reset for each individual AV mode. • Some items do not appear depending on the type of received signal. • Press a/b to select “more...”, if the item you want to adjust is not displayed. Menu operation Picture menu Various picture-related settings can be optimised. Picture Sound Recording TV menu AV mode Standard Contrast Brightness Colour Sharpness Colour temperature 18 10 10 1 medium DNR high Auto format off off Picture quality enhancement on 100Hz off Film mode Optical power control (OPC) off ResetSetuConnections Press MENU and the TV menu screen displays. Press c/d to select “Picture”, and then press a /b to select a desired item. Press c/d to set/adjust. When you exit the menu the change is adopted. ✔ Picture menu items Items AV mode Contrast* Brightness* Colour* Tint* Sharpness* Colour temperature* Colour standard DNR Move picture up/down Auto format Film mode Picture quality enhancement 100Hz Optical power control (OPC) Reset NOTE • Items with * can be adjusted and reset for each individual AV mode. • Some items do not appear depending on the type of received signal. • Press a/b to select “more...”, if the item you want to adjust is not displayed. • 100Hz will have no effect in the following cases. 1) The type of signal received is a PC signal. 2) An OSD is being displayed. 3) Teletext is activated. 1 2 3 AV mode AV mode gives you five viewing options to choose from to best match the system environment, which can vary due to factors like room brightness, type of programme watched or the type of image input from external equipment. Item Standard : For a highly defined image in a normally bright room (Enhanced Picture Contrast: On) Soft : Creates a softer image. (Enhanced Picture Contrast: On) Eco : Reduces power consumption. (Enhanced Picture Contrast: Off) Dynamic : For a clear-cut image emphasising high contrast for sports viewing. (Enhanced Picture Contrast: On) User : Allows the user to customise settings as desired. You can set the mode for each external source. (Enhanced Picture Contrast: Off) NOTE • You can adjust the factory presets given in “Standard”, “Soft”, “Eco” and “Dynamic”. • You can assign different AV mode to each external source. • Enhanced Picture Contrast technology detects the source video characteristics and smoothly adjusts the screen brightness accordingly, enabling deeper black levels. • Enhanced Picture Contrast is activated when you turn the OPC function off for the items “Standard”, “Soft” and “Dynamic” in AV mode. 32 LC -5 2H D1E -g b.i n dd 3 2LC-52HD1E-gb.indd 322008/0 3/2 4 1 5:0 1:2 12008/03/24 15:01:21
Recording menu You can set timer programmed recordings with the integrated HDD Digital Recorder or other connected recording devices. Further information on HDD recording is provided in the chapter “HDD Digital Recorder operation ”. • The internal HDD DIGITAL Recorder cannot record signals from the following terminals: EXT 3 (COMPONENT input), EXT 5, 6 (HDMI input), and EXT 7 (PC input). Recording TV menu Recording wizard Timer list Pre-record time Post-record time 00 min 05 minSetup Εxtended functionConnections ✔ Recording menu items Items Recording wizard Via EPG Via teletext (VPS) Manual Timer list Pre-record time Post-record time Recording wizard To record TV programmes, you can use the data from EPG, teletext or enter the data manually. E Via EPG Press MENU and the TV menu screen displays. Press c/d to select “Recording”, and then press OK. Press a/b to select “Recording wizard”, and then press OK. Press a/b to select “Via EPG”, and then press OK .1 2 3 4 Menu operation Dolby Virtual Speaker The Dolby Virtual Speaker effect simulates a surround sound environment with only two speakers. You can choose between two different settings for the width of the generated sound characteristics. Item off : No effect Reference Mode : Creates a convincing five-speaker surround sound listening experience from just two speakers. In this mode, the apparent width of the sound across the front image is defined by the distance between the two speakers. Wide Mode : Provides a wider, more spacious front audio image from two speakers placed close together, with the same realistic five-speaker surround sound as Reference mode. 15:57-16:59 arte Charmed - Zauberhafte Hexen 16:00-16:15 MDR FERN... Hier ab vier 16:00-16:10 EinsExtra EinsExtra Aktuell 16:00-17:15 SAT.1 Richter Hold 16:00-16:30 ProSieben M. Asam - Mode 16:00-16:55 ZDFtheater... Waschtag 16:05-17:00 Bayrische... Wir in Bayern 16:05-16:45 KiKa Skippy, der Buschpilot 16:05-17:00 KABEL1 Star Trek - Das nächste Jah... EPG (Electronic Programme Guide) Mon 31.07./16:05 Date Time Stations Topics Mon 31.07 Now all all Tue 01.08 Wed 02.08 Thu 03.08 Fri 04.08 • The EPG screen displays. • You may be routed to the “Time and date” entry screen if the TV does not recognise the current time. Press a/b /c /d to select the programme you want to record, and then press RED. • Select a programme that has not yet started. • A message appears if there is a conflict between two programmes. Follow the screen prompts and choose the one that has priority. The timer list screen appears, outlining each setting used for the upcoming recording. Confirm with OK. You can make adjustments as explained in step 3 in the following Manual section. Once completed, a red dot will appear in front of the programme as identification. • To cancel the recording, select a title from the list and press RED. If the timer list has already been transferred to an external recorder, then the timer must also be deleted there. E Via teletext (VPS) Select “Via teletext (VPS)” instead of “Via EPG” in step 4 in Via EPG. • The station selection screen displays. • You may be routed to the “Time and date” entry screen if the TV does not recognise the current time. Press a/b /c /d to select the station you want to record from, and then press OK. Press a/b to select the programme you want to record, and then press OK. • Select a programme that has not yet started. • A message appears if there is a conflict between two programmes. Follow the screen prompts and choose the one that has priority. Timer list screen appears, outlining each setting used for the upcoming recording. Confirm with OK . You can make adjustments as explained in step 3 in the following Manual section. NOTE • Select the teletext start page according to the station (the default setting is “301”). For the selection method, follow these steps: 1 while in the teletext mode, press MENU to display the Teletext menu 2 select “Setup” 3 press OK on the remote control 4 select “Preview pages”, and then input the selection value 5 6 7 1 2 3 4 33 L C -5 2H D1E -g b.i n dd 3 3LC-52HD1E-gb.indd 332008/0 3/2 4 1 5:0 1:2 32008/03/24 15:01:23
E Manual You may enter the necessary information for recording manually.Select “Manual” instead of “Via EPG” in step 4 in Via EPG . • The station selection screen displays. • You may be routed to the “Time and date” entry screen if the TV does not recognise the current time. Press a/b /c /d to select the station you want to record from, and then press OK. Timer list screen appears, outlining each setting used for the upcoming recording. Set the following settings as necessary. Confirm with OK . 1 Recorder: Selection of the recording device. 2 Date: Date of recording 3 Recording time: Time of recording 4 VPS: Selection of using VPS signal 5 Recording type: Selection of recording frequency (once only, Mon-Fri, daily, weekly or serial [if EPG data is available]). • A message appears if there is a conflict between two programmes. Follow the screen prompts and choose the one that has priority. NOTE • If you use an external recorder without AV Link, you have to select the recording source in the recorder (e.g. AUX, refer to your recorder’s operation manual). In case of recording DVB programmes, the TV’s tuner is used, not the VCR’s tuner. • If you use an external recorder with AV Link, this recording source selection is controlled automatically. Timer list Here you will find a list of channels already programmed for recording. From here, you can also change the recording data (GREEN), delete programmed recordings completely (YELLOW), or programme a new recording (RED) by pressing the assigned colour buttons. Pre- and post record time If you record a programme without VPS, you can specify a time span by which your programme time should be brought forward/prolonged so that programmes which begin/end too early/late are recorded from start to finish. 1 2 3 Menu operation Timer recording with external devices E Recorder with AV Link If you use an externally connected recorder with AV Link or a similar system, the TV set and connected recorder exchange its own station/timer data. Please consult the operating manual of your recorder to find out if your recorder is AV Link compatible. In addition use only Euro SCART cables for the connection between the TV set and recorder. Analogue stations The timer data is transmitted automatically from the TV set to the recorder after programming is complete. The recording is then controlled by the recorder and the recorder tuner is used for reception of the programme. The recording data is not saved in the timer list of the TV set. Consequently if you want to change or delete the timer data then you must do so on the recorder. Digital stations If you want to record digital stations with an externally connected recorder, then the DVB tuner is used and the TV device takes over control of the recorder. Then the station on the TV set is locked during the timer recording. E Recorder without AV Link If you cannot programme your externally connected recorder from the TV set, but it supports AV Link, the receiver of the TV set is always used. AV Link must be switched on on the recorder. Read the operating instructions of your recorder. In addition use only Euro SCART cables for the connection between the TV set and recorder. Analogue and digital stations You can control the recording from the TV set. The recorder must be set manually to the AV input to which the TV is connected. Then the station on the TV set is locked during the timer recording. Copy protection Copy-protected programs will not be output on the EURO SCART sockets for legal reasons. 34 L C -5 2H D1E -g b.i n dd 3 4LC-52HD1E-gb.indd 342008/0 3/2 4 1 5:0 1:2 42008/03/24 15:01:24
Connections menu Use this menu when connecting recorders, DVD recorder, etc. There is a wizard which will guide you through the individual steps. TV menu AV setup Sound components Antenna DVB AV-Link MiscellaneousSetup Εxtended functions Picture Connections ✔ Connections menu items Items AV setup Connection wizard Sound components TV speakers HiFi/AV amplifier Antenna DVB Antenna DVB-T Antenna wizard Antenna DVB-S Antenna wizard AV-Link Start transmission/Stop transmission Miscellaneous Manual adjustment of AV standard At EXT1/EXT2/EXT4 Assign digital audio input Allow switching voltage RGB insertion at EXT1 AV setup The integrated Connection wizard shows you which terminal you should connect your equipment to. Then connect the equipment according to the diagram and follow the messages one after another. A detailed step-by-step explanation is provided on page 16. Antenna DVB You can reconfigure the antenna setting after performing initial installation. Read the on-screen instructions carefully or see page 10 for each setting. AV Link With this function you can transfer the station data of the TV (such as station preset numbers/names/ channels/frequencies) to the recorder if the recorder is set up for AV Link. Miscellaneous Here you can change the AV standards, assign the digital audio input, switch the switching voltage on/off and allow RGB settings. Menu operation 35 L C -5 2H D1E -g b.i n dd 3 5LC-52HD1E-gb.indd 352008/0 3/2 4 1 5:0 1:2 42008/03/24 15:01:24
Menu operation Setup menu You can search for stations automatically or manually as well as set the menu language, timer functions, child lock, etc. SetupΕxtended functions Picture Sound TV menu AQUOS LINK setup Stations Child lock Timer functions Language Miscellaneous Items AQUOS LINK setup Auto power on Recorder selection Stations Search wizard Change search settings Start search/update Manual tune Change stations Select/change favourites PIP* Type* Position* Child lock PIN ???? Lock immediately Lock daily Age-related lock Change PIN Delete PIN Timer functions Switch off today only Switch off daily One-time reminder Wake up Mon-Fri Wake up Sat Wake up Sun Wake up with Wake up signal volume Language Miscellaneous Automatic switchoff if no signal On-screen displays On-screen display time Volume Time and date Time Deviation from Universal Time Date Beginning of daylight-saving time End of daylight- saving time Software update TV base software DVB software DVB subtitles DVB character set NOTE * This item appears only when PIP is activated. Stations The menu contains the automatic station search and the manual station settings. You can re-sort stations, enter and change station names, and delete stations. E Search wizard Use this menu to search for stations automatically once certain settings have been made. (See page 10, Initial installation wizard for details.) Press MENU and the TV menu screen displays. Press c/d to select “Setup”, and then press OK . Press a/b to select “Stations”, and then press OK . Press a/b to select “Search wizard”, and then press OK. • You will get a table for the auto station search. If necessary select “Change search settings”, and then press OK. Otherwise skip to step 6. Press a/b /c /d to select your country or area listed on the screen, and then press OK. Follow the menus and make necessary settings one after another. Press a/b to select “Start search/update”, and then press OK. NOTE • The station search may take some time. • Do not make any entries or switch off the set during this time. • When the search has ended you will be shown the found and stored stations sorted in numerical order. • After the station search has been completed, close the table by pressing OK. 1 2 3 4 5 6 36 LC -5 2H D1E -g b.i n dd 3 6LC-52HD1E-gb.indd 362008/0 3/2 4 1 5:0 1:2 42008/03/24 15:01:24
Menu operation E Manual tune Use the manual tune option when receiving TV signals whose TV/Colour standard deviate from the one specified. However, this requires detailed knowledge. E Change stations You can move stations, enter or change station names, and delete stations. The operation is the same as explained on page 12, “To delete, restore, move, and rename stations from the station list ”. E Select/change favourites Each favourites list can contain up to 99 stations. You can put together the favourites lists to suit your requirements (e.g. topic lists). Other persons using this TV set can create their own favourites lists. The favourites lists also have the advantage that the stations from different signal sources can be stored in the order of your preference. Up to 6 favourites list can be stored. Press MENU and the TV menu screen displays. Press c/d to select “Setup”, and then press OK . Press a/b to select “Stations”, and then press OK . Press a/b to select “Select/change favourites”, and then press OK. All stationsStations of FavouriteList1Select/change favourites Search wizard Manual tune Change stations Stations • “Select/change favourites” screen displays. GREEN : Select the next favourites list. Renaming favourites Prerequisite : Favourites list (right column) must be selected. If not, change the list with d. Press BLUE to activate the “Rename favourite list”, and enter the new name with 0 – 9 as on a mobile phone key pad, and then press OK to save the new name. 1 2 1 2 Adding favourites Prerequisite : The “All stations” screen (left column) must be selected. If not, change the list with c. Using a/b or 0 – 9, mark the stations to be added as a new favourite. Press OK to add. All stationsStations of FavouriteList1Select/change favourites Search wizard Manual tune Change stations Stations • The new station is added at the end of the favourites list. Once you exit the screen, the change is adopted. Deleting favourites Prerequisite : The Favourites list (right column) must be selected. If not, change the list with d. Using a/b or 0 – 9 , mark the stations to be deleted. Press OK to delete. Or Press RED to activate “Clear favourites list”, and then press OK to clear the list. Moving/sorting favourites Prerequisite : The Favourites list (right column) must be selected. If not, change the list with d. Using a/b or 0 – 9 , mark the stations to be moved. Press YELLOW to activate “Move station”. Select the insertion position with a/b or 0 – 9 . Press OK to confirm. Child lock With the child lock you can bar access to all stations immediately or daily for a certain time period. To use this function, you have first to define your PIN. NOTE • The TV power will be turned off if no PIN is entered for several seconds. • As a precautionary measure, make a note of your PIN on the back of this operation manual, cut it out and keep it in a safe place that children cannot reach. • See page 52 if you lose or forget your PIN. 1 2 3 1 2 3 1 2 3 4 5 37 L C -5 2H D1E -g b.i n dd 3 7LC-52HD1E-gb.indd 372008/0 3/2 4 1 5:0 1:2 52008/03/24 15:01:25
Menu operation Geometry menu In this menu you can set the geometry values of your connected PC. First connect PC to EXT7 (ANALOG RGB) or to EXT5/6 using HDMI/DVI conversion cable. Recording TV menu Picture horizontal Picture vertical Phase position 0 0 0 Geometry Picture Sound Conn Items Picture horizontal Picture vertical Phase position* * May not be displayable depending on the signal. Other menu items Some of the useful features can be directly called up by pressing assigned buttons on the remote control. Extended functions menu The Extended functions menu provides alternative way to access frequently used functions/menus. Recording TV menu DR archive DVB radio Favourites PhotoViewer Index Teletext subtitles Εxtended functions Picture Sound Items DR archive DVB radio Favourites PhotoViewer Index Teletext subtitles Timer functions In this menu you can have the TV set switch off (to standby) daily at a certain time automatically. You can also have it emit an alarm (reminder) daily at a certain time. This is also possible when the TV is in standby mode (wake up). PIP In this menu, you can adjust all settings for the Picture- in-Picture display, such as: type, position, window size. To call this menu you must activate the PIP mode. See page 23 for detailed operation. Language You can select a language from the Setup menu. Select from among 19 languages. (Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Norwegian, Polish, Portuguese, Russian, Slovak, Slovenian, Spanish, Swedish, Turkish) Miscellaneous There is an explanatory text for each function. If the Info text is not shown, press INFO to activate.External sources Use the External Sources screen to select/check the external equipment connected to the terminal(s) on the back of the TV. To watch images from external AV equipment, press b. • To close the External Sources screen, press b again. Press a/b to select the corresponding terminal, and then press OK. NOTE • If AQUOS LINK-compatible device connected to EXT 5 or 6 sends model-specific data to the TV, its device name is displayed. 1 2External sources VIDEO DVD-REC DVD EXT3 EXT4 EXT5 EXT6 EXT7External sources VIDEO DVD-REC DVD EXT3 EXT4 EXT5 EXT6 EXT7 Still image You can freeze a motion picture on the screen. Press 3. Press 3 again to exit still image. NOTE • This function may not be available depending on signal condition. 1 2 38 LC -5 2H D1E -g b.i n dd 3 8LC-52HD1E-gb.indd 382008/0 3/2 4 1 5:0 1:2 72008/03/24 15:01:27