Sharp Lc 52hd1e Operation Manual

							
Connecting external devices
Connecting HDMI device to TV
Controlling HDMI devices using AQUOS LINK
What is AQUOS LINK?
Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can 
interactively operate compatible system devices (AV amplifier, DVD, Blu-ray Disc device) 
using a single remote control.
NOTE
•  AQUOS LINK-compatible AQUOS BD Player, AQUOS Audio speaker system and AQUOS Recorder are to be on sale after the release of this TV. (As of July 2007)
What you can do with AQUOS LINK
✔  One Touch Recording
You do not have to search for the remote control of your recording device. Press the  REC 
E  or  REC STOP  H buttons inside the flip cover to start/stop recording what you see on 
the TV.
✔   One Touch Play
While the TV is in standby mode, it automatically turns on and plays back the image from 
the HDMI source.
✔  Single remote control operation
The AQUOS LINK automatically recognises the connected HDMI device and you can 
control the TV and the devices as if using a universal remote control.
✔  Operating Title list of external devices
In addition to displaying the TV’s own Timer list (page 34), you can also call up the external 
player’s Top menu or AQUOS BD Player’s/AQUOS Recorder’s Title list provided that the devices support AQUOS LINK.
✔  Multiple control of HDMI devices
You can select which HDMI device to operate using the  OPTION button.
NOTE
•  Point the remote control toward the TV, not to connected HDMI device.
•  Video noise may occur depending on the type of HDMI cable used. Make sure to use a certified HDMI cable.
•  Up to 3 HDMI recording devices, one AV amplifier and two players can be connected using this system.
•  These operations affect the HDMI device selected as the current external source. If the device does not operate, turn on the 
device and select the appropriate external source using  b.
First connect the AQUOS Audio speaker system or an AQUOS BD Player/AQUOS\
 
Recorder that supports the HDMI CEC protocol.
NOTE
•  Refer to the operation manual of the device to be connected for further \
details.
•  After unplugging connection cables or changing the connection pattern, first turn on the 
power of the TV with all relevant device’s power turned on. Change the external input source 
by pressing  b, select the appropriate external source and verify the audiovisual output.
To OUT
 19
TV
Coaxial AUDIO cable
(commercially  available)
Certified HDMI cable 
(commercially available)
AQUOS Audio speaker system
Connecting AQUOS BD Player/AQUOS Recorder  via AQUOS Audio speaker system
AQUOS BD Player/ AQUOS Recorder
Certified HDMI cable 
(commercially available)
L C -5 2H D1E -g b.i n dd   1 9LC-52HD1E-gb.indd   192008/0 3/2 4   1 5:0 0:5 82008/03/24   15:00:58
 
						

							
Connecting external devices
AQUOS LINK setup
E AQUOS LINK Auto power on
If this is activated, the One Touch Play function is 
enabled.
While the TV is in standby mode, it automatically turns 
on and plays back the image from the HDMI source.Press  MENU  and the TV menu screen displays.
Press  c/d  to select “Setup”, and then press 
OK .
Setup Εxtended functions Picture Sound
TV menu
AQUOS LINK setup
Stations
Child lock
Timer functions
Language
Miscellaneous
Press 
a/b  to select “AQUOS LINK setup”, and 
then press  OK.
Press  a/b  to select “Auto power on”.
Press  c/d  to select “yes”.
NOTE
•  The factory default for this item is “no”.
1
2
3
4
5
AQUOS LINK One Touch Recording
Preparation
Make sure your CEC-compatible recorder is ready to 
record. Check antenna and cable connections and the 
remaining capacity of the HDD or DVD disc.
Open the remote control’s flip cover.
Press  REC E.
•  The channel of the CEC-compatible recorder 
now changes to that of the TV, and recording 
automatically begins.
Press  REC STOP  H to stop recording.
1
2
3
E Selecting recorder
Here, you can select a recorder for the recording from 
several connected recorders.
Repeat steps 1 to 3 above.
Press  a/b  to select “Recorder selection”, and 
then press  OK.
Select the recorder, and then press  OK.
NOTE
•  If you have connected AQUOS Audio speaker system 
between the TV and AQUOS Recorder, External source’s 
indication changes from “EXT5” to “EXT5 (Sub)”, for 
example.
1
2
3
 20
TV
AQUOS BD Player/ 
AQUOS Recorder
Certified HDMI cable 
(commercially available)
Connecting an AQUOS BD Player/
AQUOS Recorder only
L C -5 2H D1E -g b.i n dd   2 0LC-52HD1E-gb.indd   202008/0 3/2 4   1 5:0 1:0 02008/03/24   15:01:00
 
						

							
Connecting external devices
Operating an AQUOS LINK device
AQUOS LINK allows you to operate the HDMI-
connected device with one remote control.
NOTE
•  The AQUOS LINK buttons such as B, REV  G , PLAY  
I , FWD  J , STOP  H  inside the flip cover should not be 
confused with the buttons used for HDD operation. See 
page 45.
Open the remote control’s flip cover.
Press  PLAY  I to start playback of a title.
•  This does not start playback of programmes stored 
in the DR archive.
•  See right column, section “ Playback of titles using 
AQUOS LINK ” if you want to start playback using 
the list of the titles of the AQUOS BD Player/AQUOS 
Recorder.
Press  FWD J  to fast forward.
 Press  REV G  to reverse.
 Press  STOP H  to stop.
 Press  B to turn the HDMI-connected device 
on/off.
Listening with the AQUOS Audio speaker 
system
You can opt to listen to the TV sound only from the 
AQUOS Audio speaker system and manually change 
its sound mode.
NOTE
•  The AQUOS LINK buttons such as  B, REV  G , PLAY  
I , FWD  J , STOP  H  inside the flip cover should not be 
confused with the buttons used for HDD operation. See 
page 45.
Open the remote control’s flip cover.
Press  OPTION .
Press  a/b  to select “By AQUOS Audio SP”.
Press  c/d  to select “yes”.
•  Select “no” to listen to the TV sound.
•  The sound from the TV speaker and headphone 
terminal is silenced and only the sound from the 
AQUOS Audio speaker system is audible.
Manually changing AQUOS Audio speaker 
system’s sound mode
Open the remote control’s flip cover.
Press  OPTION .
•  The AQUOS LINK menu displays.
Press a/b  to select “Change sound mode”.
The sound mode changes every time you press 
OK .
•  Refer to the operation manual of the AQUOS audio 
speaker system for details.
1
2
3
1
2
3
4
1
2
3
4
Playback of titles using AQUOS LINK
This section explains how to play back a title in the 
AQUOS BD Player/AQUOS Recorder.
Open the remote control’s flip cover.
Press  OPTION .
•  The AQUOS LINK menu displays.
Press a/b  to select “Top menu / title list”, and 
then press  OK.
•  The linked recorder now powers on and the TV 
automatically selects the appropriate external input 
source.
•  The title list data from the connected AQUOS BD  Player/AQUOS Recorder displays.
Select the title with  a/b /c /d , and then press 
PLAY  I.
Selecting media type for CEC-compatible 
recorder
If your recorder has multiple storage media, select the 
media type here.
Open the remote control’s flip cover.
Press  OPTION .
•  The AQUOS LINK menu displays.
Press a/b  to select “Media change”.
Select the desired medium, such as DVD or 
HDD. The media type changes every time you 
press  OK.
HDMI device selection
If multiple HDMI devices are connected in a daisy 
chain, you can specify which device to control here.
Open the remote control’s flip cover.
Press  OPTION .
•  The AQUOS LINK menu displays.
Press a/b  to select “Model selection”, and 
then press  OK. The HDMI device changes when 
you press  OK, and the menu screen goes out.
1
2
3
4
1
2
3
4
1
2
3
 21
LC -5 2H D1E -g b.i n dd   2 1LC-52HD1E-gb.indd   212008/0 3/2 4   1 5:0 1:0 22008/03/24   15:01:02
 
						

							
Using AV Link function 
This TV incorporates four typical AV Link functions 
for smooth connections between the TV and other 
audiovisual equipment.
One Touch Play
While the TV is in standby mode, it automatically turns 
on and plays back the image from the audiovisual 
source (e.g. VCR, DVD).
TV Standby
When the TV enters standby mode, the connected 
audiovisual equipment (e.g. VCR, DVD) enters standby 
mode as well.
WYSIWYR (What You See Is What You Record)
When the remote control unit of the connected VCR 
has the WYSIWYR button, you can automatically start 
recording by pressing the WYSIWYR button.
Preset Download
Automatically transfers the channel preset information 
from the tuner on the TV to the one on the connected 
audiovisual equipment (e.g. VCR) via the EXT 2 
terminal.
NOTE
•  Refer to operation manuals of each external equipment for the details.
•  The use of the AV Link function is only possible if the  TV-set has enforced a complete auto installation with 
the connected audiovisual equipment (Page 10, initial 
installation wizard).
  The availability of the AV Link function depends on  the audiovisual equipment used. Depending on the 
manufacturer and type of equipment used, it is possible 
that the described functions may be completely or partially 
unusable. 
Connecting external devices
Recording via the AQUOS Recorder EPG 
(only for recorder)
You can call up the CEC-compatible recorder’s EPG 
and preset timer recordings using the TV’s remote 
control.
Open the remote control’s flip cover.
Press  OPTION .
•  The AQUOS LINK menu displays.
Press a/b  to select “AQUOS Recorder EPG”, 
and then press  OK.
•  The external input source switches and the recorder’s 
EPG is displayed.
Select the programme to record.•  Refer to the operation manual of the recorder for details.
1
2
3
4
NOTE
•  HDMI audio signals may not be output from the AUDIO OUT L-R.
E Using TV speakers as centre speakers
Connect as shown if using the TV speakers as a centre 
speaker. In this case, make a connection between the 
centre output of the amplifier and the centre input of 
the TV (AUDIO IN CENTRE) with a cinch cable.
Speaker/amplifier connection
Connect an amplifier with external speakers as shown 
below.
E Connecting a digital amplifier
NOTE
•  HDMI audio signals are not output from DIGITAL AUDIO (OUT).
E Connecting an analogue amplifier
After connecting, go to “TV menu > 
Connections > Sound components > HiFi/AV 
amplifier.”
When you select “Surround amplifier” for “Type 
of amplifier”, make sure to select “yes” for the 
item “TV loudsp. as centre speaker”.
ATTENTION
Do not use the centre speaker connection of the 
amplifier, use the centre pre-amp output instead!
1
2
 22 TV
AUDIO OUT L-R Analogue amplifierDigital amplifier
DIGITAL AUDIO (OUT)
TV
DIGITAL AUDIO (OUT)Digital amplifier TV
PREOUT 
(C)
AUDIO IN 
(CENTRE)
L
C -5 2H D1E -g b.i n dd   2 2LC-52HD1E-gb.indd   222008/0 3/2 4   1 5:0 1:0 32008/03/24   15:01:03
 
						

							
Other features
Picture in Picture (PIP)Using the PIP menu
Here you can set the PIP type (split screen or small 
picture) and the position of the small picture.Press  PIP to activate the PIP screen.
Make sure the picture you want to operate is 
surrounded in a green frame.
Press  MENU  to display the PIP menu. Here you 
can change the PIP type (“Small PIP” or “Split 
screen” under “Type”) or the position of the 
small picture (under “Position”).
•  You can also move the small picture to a different 
corner of the screen by using  a/b /c /d .
Type PIP Child lock    Timer functions    Language    MiscellaneousTV menu -> Setup
Small PIP    Split screen
Position  Upper right
Limitations during PIP mode
•  Depending on the combination of HDTV signals,  PIP mode may not be displayable.
•  You cannot display two encoded stations at the  same time.
•  During recording, the picture change and station  selection is restricted.
1
2
3
This TV can display two different images using the PIP 
function.
 Press  PIP to activate the PIP screen.
105 BBC TWO Stereo
11:50 - 12:10 Schools: Look And Read
Language/sound selection11:50
DVB subtitles
12 E28
m
 
GREEN frame:• This indicates that the operation affects the picture 
surrounded in a green frame. Pressing  Pr /s , 
for example, will change the channel of the screen 
surrounded in a green frame. If a green frame is not 
visible, press  GREEN.
 WHITE frame:• This indicates the operation does not affect the 
picture surrounded in white frame. Pressing  Pr /
s , for example, will change the channel of the 
screen without the white frame.
Freezing the sub picture
 Press  RED to freeze/unfreeze the image in the 
sub picture. 
Swapping two pictures
 Press  YELLOW to swap contents.
Stations selection Make sure the picture you want to operate is 
surrounded in a green frame.
Select stations normally.
Scanning selection Make sure the picture you want to operate is 
surrounded in a green frame.
Press  BLUE to start “Scan stations”.
• The frame turns blue, and the stations change 
automatically.
Press  BLUE again to stop the scanning.• The frame turns green.
1
2
1
2
3
 23
LC -5 2H D1E -g b.i n dd   2 3LC-52HD1E-gb.indd   232008/0 3/2 4   1 5:0 1:0 62008/03/24   15:01:06
 
						

							
Other features
Using PhotoViewer
This TV is equipped with PhotoViewer, allowing you to 
view pictures in the standard JPEG format via a USB 
stick or a memory card in a card reader. In addition you 
can arrange the pictures into a Slideshow.
E Connecting
Insert a card reader (with a USB cable) or a USB stick 
into the USB terminal on the TV (see page 6). Should 
you find it difficult to connect a USB cable due to the 
TV installation pattern (e.g., wall-mounting), use a USB 
extension cable (commercially available.)
NOTE
•  Depending on the model of a card reader or USB stick, the TV may not be able to recognise the contained data.
•  Use only alphanumeric characters for naming a Photo  Viewer file.
•  Do not disconnect a USB stick from the TV while  transferring pictures, using Slide Show, or when a menu 
screen is switching to another.
•  Do not connect and disconnect a USB stick from the TV  repeatedly.
Starting PhotoViewer
PhotoViewer starts automatically when a memory card 
or USB device with the appropriate data is connected. 
The first page of the Photo Overview will be shown.
NOTE
•  You cannot display image data in progressive JPEG format. A memory card or USB device should contain data in the 
standard JPEG format.
If a memory device is already inserted and if it is 
not detected automatically start PhotoViwer as 
follows:
Press  MENU  and the TV menu screen displays.
Press  c/d  to select “Extended functions”, and 
then press  b to move down.
Press  a/b  to select “PhotoViewer”, and then 
press  OK.
•  If several memory cards are present in the card 
reader, a selection menu opens. Press  c/d  to select 
the desired memory card, and confirm with  OK.
•  When a memory device is inserted, PhotoViewer  may not start automatically. Please start PhotoViewer 
using steps 1-3 above.
Exiting PhotoViewer
 Press  END on the remote control to exit the 
PhotoViewer screen or remove the memory card 
or USB device.
1
2
3
Watching photos
EXAMPLE
USB 1:\picture_024.jpg\        38 pictures
View picture
Mark picture Slide show
scroll       (1/3)
Press 
a/b /c /d  to select the picture, press 
P r /s  if there are more pages.
Press  OK to display the picture in full frame.
✔ Press  J or Pr  to move to the next image.
✔  Press  G or Ps  to move to the previous image.
✔  Press  END to turn the photo information on/off.
•  If “Photo info” is set to “on”, extended information  appears. (Page 25)
✔  Press  YELLOW  to zoom in on the picture. Zooming 
in  m2,  m4,  m8 and original size are possible. In the 
zoom mode you can move the picture around with 
a /b /c /d . To exit the zoom mode press  OK or 
H .
✔  Press  c/d  to rotate the image 90 degrees right/
left. (You have to pause the Slideshow to rotate 
pictures.)
✔  Press  OK or H to return to the Photo overview 
screen.
Opening picture folder
  If there is a picture folder within the memory  device, press  a/b /c /d  to select the folder in 
the Photo Overview screen, and then press  OK 
to open the folder.
USB 1:\HD1PhotoViewer\        38 pictures
Open folderSlide show
scroll       (1/3)
•  The pictures in the folder are displayed.
1
2
 24
L C -5 2H D1E -g b.i n dd   2 4LC-52HD1E-gb.indd   242008/0 3/2 4   1 5:0 1:0 82008/03/24   15:01:08
 
						

							
Watching Slide show
Starting Slide show
 Press I to start/resume Slide show.
NOTE
•  If no pictures is selected for Slide show, all the pictures in  the memory device are played in Slide show. 
  While Slide show is in progress (or paused), you  can:
✔ Press  OK to display Photo Overview.
✔  Press  F to pause/resume Slide show.
✔  Press  YELLOW  to zoom in (only when Slide show 
is paused).
✔  Press  c/d  to rotate the image 90 degrees right/left 
(only when Slide show is paused).
✔  Press  J or Pr  to move to the next image.
✔  Press  G or Ps  to move to the previous image.
✔  Press  H to end Slide show.
NOTE•  The time length with the picture change may be longer 
than the time setting in the menu.
Selecting pictures for Slide show
Press  a/b /c /d  to pick pictures to be played 
in the Slide show, and then press  BLUE to 
confirm.
Press  I to start/resume Slide show with only 
the selected pictures.
1
2
Using PhotoViewer menu
With the PhotoViewer menu you can adjust the picture 
settings and select the memory device.
  While in the PhotoViewer screen, press  MENU 
to display the PhotoViewer menu screen.
Go to ... Picture 001    Top of folder    
PhotoViewer menu
 
Picture display Optimum size
Picture change every 20
Picture crossovers all alternating
Photo info on
Picture settings
 What you can do with the PhotoViewer menu
Items Description
Go to ... You can go to the picture direct or jump to the 
beginning or end of the file.
Picture display “Optimum size”: the pictures are made smaller 
or larger to optimally fill out the screen.
“Original resolution”: the pictures are displayed 
in its original resolution. If the picture resolution 
is higher than that of the screen, parts of the 
picture are cut off.
Picture change You can set the duration of each frame in Slide 
show between 3 and 60 seconds.
Picture 
crossovers You can select 4 different picture transition 
patterns in Slide show. Also you can select “all 
alternating” to have the photo transition run in 
sequence.
Photo info You can display additional information 
about the images. They are: time and date, 
resolution, and picture size.
Picture settings Here you can adjust: AV mode, Contrast, 
Brightness, Colour and Sharpness.
Select memory 
medium You can select the memory medium for 
PhotoViewer. This option becomes visible only 
when there are more than 2 medium inserted 
to the TV.
Other features
 25
L
C -5 2H D1E -g b.i n dd   2 5LC-52HD1E-gb.indd   252008/0 3/2 4   1 5:0 1:1 32008/03/24   15:01:13
 
						

							
Other features
EPG (Electronic Programme Guide)
EPG stands for Electronic Programme Guide and 
provides you with on-screen programme details. With 
this system, as with a printed programme guide, you 
can learn about the current programme. In addition, 
programmes can be sorted according to certain topics, 
memorized, and recordings can be programmed.Press  EPG.
15:57-16:59 arte    Charmed - Zauberhafte Hexen
16:00-16:15 MDR FERN...   Hier ab vier
16:00-16:10  EinsExtra   EinsExtra Aktuell
16:00-17:15 SAT.1   Richter Hold
16:00-16:30 ProSieben   M. Asam - Mode
16:00-16:55  ZDFtheater...   Waschtag
16:05-17:00  Bayrische...   Wir in Bayern
16:05-16:45 KiKa   Skippy, der Buschpilot
16:05-17:00 KABEL1   Star Trek - Das nächste Jah... EPG (Electronic Programme Guide) Mon 31.07./16:05
Date
Time
Stations
Topics Mon 31.07
Now
all
all Tue 01.08
Wed 02.08 Thu 03.08 Fri 04.08
•  The first time you start EPG a wizard becomes active 
(not for DVB), and it guides you through the setup. 
Then execute the data capture (see next page).
•  In the programme list all currently running  programmes are first listed.
•  The display of the programme guide is divided into  two branches. The lower programme list is influenced 
by the upper search restrictions.
• If necessary press  Pr /s  to scroll the pages up/
down.
Press  BLUE to switch between the upper 
search restrictions “Select date, ..., topics” and 
the lower programme list.
Tuning in (current programme) or setting 
programmed viewing (future programme) Prerequisite : you are in the lower programme 
list. (If not, press  BLUE to switch over.)
Select station and press  OK.
Items Description
View The TV set switches to the marked programme 
in progress.
Memorize The programme has not yet started and 
is memorised. A 
✔ appears in front of 
the programme. The TV set switches 
over automatically at the beginning of the 
programme or the TV will automatically switch 
on from standby mode unless it is set not to 
switch on. (Page 27)
1
2
1
2
Adjusting the programme list
Prerequisite : you are in the upper search 
restrictions. (If not, press  BLUE to switch over.)
Select “Date”, “Time”, “Stations” or “Topics” 
with  a/b .
  Select search restrictions for each line.
15:57-16:59 arte    Charmed - Zauberhafte Hexen
16:00-16:15 MDR FERN...   Hier ab vier
16:00-16:10  EinsExtra   EinsExtra Aktuell
16:00-17:15 SAT.1   Richter Hold
16:00-16:30 ProSieben   M. Asam - Mode
16:00-16:55  ZDFtheater...   Waschtag
16:05-17:00  Bayrische...   Wir in Bayern
16:05-16:45 KiKa   Skippy, der Buschpilot
16:05-17:00 KABEL1   Star Trek - Das nächste Jah... EPG (Electronic Programme Guide) Mon 31.07./16:05
Date
Time
Stations
Topics Mon 31.07
Now
all
all Tue 01.08
Wed 02.08 Thu 03.08 Fri 04.08
TIPS
•  For example, if you are looking for the next news 
broadcast, select today’s date, for “Time”, select “Soon”, 
for “Stations” select “all”, and for “Topics” select “News”. 
Then you get a list of all news programmes in the 
programme list below.
•  If the line “Time” is selected, then you can enter the time  after which the programs will be displayed, via  0 - 9 on the 
remote control. Always enter four digits, e.g. 0900 for 9:00 
AM.
•  If a favourites list has been selected in the “Stations” line,  only the programmes of stations in the favourites list are 
displayed in the programme list.
• Before pressing  BLUE to leave the upper selection lines, 
select one of the preceding lines. If you then switch back 
to the programme list, you can change this menu line with 
c /d  without having to leave the programme list. If you 
have marked “Time”, then you can enter the time after 
which the programmes will be displayed using  0 - 9 on the 
remote control.
Calling additional information about the 
programmes
Brief information about programmes is displayed under 
the programme list.
 Press  m to display detailed information if the 
m  icon is shown.
Presetting a recording Prerequisite : you are in the lower programme 
list. (If not, press  BLUE to switch over.)
Select a desired programme with  a/b , and 
then press  RED (Record).
•  See “Recording wizard - Via EPG” on page 33 for 
details.
1
2
1
2
 26
LC -5 2H D1E -g b.i n dd   2 6LC-52HD1E-gb.indd   262008/0 3/2 4   1 5:0 1:1 32008/03/24   15:01:13
 
						

							
Other features
Using EPG menu
Press EPG.
Press  MENU .
EPG menu
Station selection
Data capture on (for DVB + analogue)
Items Description
Select provider In analogue TV reception, there are possibly 
different providers who broadcast the EPG 
data for certain station packages. To get 
another range of stations, you can change 
the provider with the “Select provider”. If the 
provider you are looking for is not in the list, 
then press 
YELLOW to perform a Provider 
search.
The stations offered by the provider will be 
displayed in a list.
Station selection You can remove certain stations from the 
programme guide. These stations must be 
deactivated in the station selection. First, all 
stations for which programme information can 
be provided are marked with a 
✔ . Stations 
without a  ✔ are not included in the programme 
guide.
Station markings according to reception 
ranges:
E : analogue stations via antenna/cable, for 
which the current provider supplies data.
T : digital terrestrial stations DVB-T,
C : digital cable stations DVB-C,
S : digital satellite stations DVB-S1/S2.
Data capture If you want to use EPG for analogue and digital 
stations, select “on” (for DVB + analogue). 
If you want to use EPG and only have DVB 
reception, select “on” (only for DVB). If you are 
not using EPG and therefore do not want to 
receive any EPG data, select “off”. 
After making changes in the EPG menu, 
or each time the power switch has been 
switched off, the EPG data must be captured. 
To do this, switch on the device and select 
(for analog stations) the station that you have 
defined as the provider, and let the TV set run 
for about 1 hour with the selected station. Or 
switch the TV set to standby mode. After 2 
minutes the display on the TV glows orange 
and the EPG data capture begins. When 
the data capture process has concluded the 
display will return to red. The data capture 
process is usually performed between 2:00 am 
and 5:00 am, when the TV set is in standby 
mode.
1
2
 27
L
C -5 2H D1E -g b.i n dd   2 7LC-52HD1E-gb.indd   272008/0 3/2 4   1 5:0 1:1 42008/03/24   15:01:14
 
						

							
Conditional Access Module (CI 
Module)
In order to receive coded digital stations, a Conditional 
Access Module (CI Module) and a CA Card must be 
inserted in the CI slot of your TV set. (Page 6)
The CI Module and the CA Card are not supplied 
accessories. They are usually available from your 
dealer.
Inserting the CA Card into the CI ModuleMake sure the TV set is switched off with the 
main power switch ( a) on the set, or pull the 
AC plug.
  With the side with the gold coloured contact  chip facing the side of the CI Module marked 
with the provider’s logo, push the CA Card 
into the CI Module as far as it will go. Note the 
direction of the arrow printed on the CA Card.
Inserting the CI Module in the CI slot
Remove the rear terminal cover.
Remove the CI slot cover.
Carefully insert the CI 
Module in CI slot 1 or CI slot 
2 with the contact side 
forward.
  The logo on the CI Module  must be facing outward, 
from the rear of the TV. Do 
not use excessive force. 
Make sure the module is not 
bent in the process.
  If the CI Module is correctly installed, the eject  button protrudes a little further.
1
2
3
4
Watching DVB broadcasts
Switching on the TV set
After powering on with the new CI Module inserted, 
a dialogue will appear. You must conduct a station 
search.
Press  OK to start the station wizard.
Check the recommended search routine 
parameters and then start the search.
Replace the cover.
Checking CI Module information
NOTE
•  Make sure that CI Module is properly inserted.
•  This menu is only available for digital stations.
Press  MENU  and the TV menu screen displays.
Press  c/d  to select “Setup”, and then press  b 
to move down.
Press  a/b  to select “Miscellaneous”, and then 
press  b to move down.
Press  c/d  to select the CI Module you want to 
check, and then press  OK.
•  The content of this menu depends on the provider of 
the CI Module.
Removing the CI Module•  Switch off the TV set’s main power switch ( a).
Remove the cover from the rear of 
the set.
Press in the eject button on the 
appropriate module slot, and the 
module will release.
Remove the module from the set.
Replace the cover.
5
6
7
1
2
3
4
1
2
3
4
 28
LC -5 2H D1E -g b.i n dd   2 8LC-52HD1E-gb.indd   282008/0 3/2 4   1 5:0 1:1 52008/03/24   15:01:15