Sharp Lc 32d44 Operation Manual

21
Input SkipThis setting allows you to skip the HDMI or PC-IN Input 
(Input 4 (HDMI), Input 5 (HDMI) and Input 6 (RGB)) 
on the Input Selection operation.
Yes: Skips the input.
No:  Does not skip input.
Input Signal
(for Analog PC Input Mode Only)
Some input signals may have to be registered manually 
to display properly. The pair of input signals (resolutions) 
in the list below is not distinguishable when received. 
In such a case, you have to set the correct signal 
manually. After setting once, it...

22
Parental CTRL
(Parental Control Setting)
Secret No.
Allows you to use a secret number to protect certain 
settings from being accidentally changed.
IMPORTANT:
Three conditions must be met to enable the V-Chip (see 
pages 22 to 24):
1.  Secret No. is registered.2. V-Chip/V-Chip (DTV Only) settings have been made.
The “V-Chip (DTV Only)” will only be selectable when 
a new rating system can be downloaded via digital 
broadcasting in the U.S.
3.  Status is set to On.
■ New Secret No.
You can set and...

23
■ TV Parental Guidelines   ExampleMPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
L
S V
FV D
TV-G
TV-PG
TV-14
TV-MA
NONE TV-Y7 TV-Y
Press a/
b  to adjust the item to your desired position.
 indicates the item is blocked. Press  MENU to exit.
Suggested age
TV-Y:  All children.
TV-Y7:  Directed to older children.
TV-G:  General audience.
TV-PG:  Parental Guidance suggested.
TV-14:  Parents strongly cautioned.
TV-MA:  Mature audience only.
   ExampleMPAA
TV Guidelines
Can. English Ratings...

24
On-Screen Display Menu
■ Canadian French Ratings
ExampleMPAA
TV Guidelines
Can. English Ratings
Can. French Ratings
8ans+
13ans+
16ans+
18ans+
NONE G E
Press a/
b  to adjust the item to your desired position. 
 indicates the item is blocked. Press  MENU to exit.
E: Exempt programming.
G:  General: All ages and children, contains minimal direct 
violence, but may be integrated into the plot in a humorous 
or unrealistic manner.
8ans+:  General but inadvisable for young children: May 
be viewed by a...

25
Input SelectIf the image does not come in clearly from the external 
equipment connected to INPUT 1, you may need to 
change the input signal type setting from the list below:
Auto/COMPONENT/VIDEO
If the selected signal type is incorrect, images are not 
displayed at all or are displayed without any color.
Refer to your external equipment operation manual for the 
signal type.
If you set INPUT 1 to Auto, the TV will automatically select 
the input signal.
Setting INPUT 1 signal selection to Auto when...

26
Digital Setup
This setting allows you to optimize the settings of 
Digital broadcasting.
Identification Audio Setup
Software Update[PCM]
Digital Setup
Example
1   Press 
MENU to display the MENU screen, and then 
press  c/
d  to select Digital Setup.
2   Press 
a/
b  to select a specifi c adjustment item, 
and then press  ENTER.
3   Press 
a/
b  (or 
c/
d ) to select the desired setting, 
and then press  ENTER.
4   Press MENU to exit.
Audio SetupYou can output digital audio to an AV amplifi er or...

27
On-Screen Display Menu
During the data checking, “Checking” blinks.
Checking
Now checking the data in the USB memory device.
The current version of the TV software and the version 
of the update fi le on the USB memory device are 
displayed. To update the TV software with the update 
fi le, select “Yes”, and then press 
ENTER.
 Example
No
Current Version:                    UXXXXXX1
Software update file is detected 
in the USB memory device. Start update?
Update Version:                    UXXXXXX2 Ye s...

28
Troubleshooting
          Possible Solution
 Is the volume too low? (See page 13.)
 Is “Variable” selected in “Output Select”? (See page 25.)
 Have you pressed  MUTE on the remote control unit? (See page 13.)
Cautions regarding use in high and low temperature environments
Appendix
Problem

 Unit cannot be operated.
 Remote control unit does not  operate.
 Picture is cut off/with sidebar  screen.
 Strange color, light color, or color  misalignment
 Power is suddenly turned off.

  Check if you pressed...

29
Item Model: LC-32D44U Model: LC-37D44U
LCD panel 32
o screen size class Advanced Super 
View & BLACK TFT LCD 
(Diagonal Measurement : 31 
1/2o ) 37
o screen size class Advanced Super 
View & BLACK TFT LCD
(Diagonal Measurement : 37 o)
Resolution 1,049,088 pixels (1,366  g 768)
TV 
Function TV-standard (CCIR) American TV Standard ATSC/NTSC System
Receiving 
Channel
VHF/UHF VHF 2-13ch, UHF 14-69ch
CATV 1-135ch (non-scrambled channel only)
Digital Terrestrial 
Broadcast (8VSB)2-69ch
Digital cable*1...

30
 As a precautionary measure, make a note of your secret number above, cut\
 it from this manual, and keep it in a safe place.
The  secret  number  is                .
CLEARING THE SECRET NUMBER
If you forget the secret number, clear the secret number using the follo\
wing procedure.
1 Press MENU  to display the MENU screen, and then press 
c/
d  to select “Setup”.
2 Press 
a/
b  to select “EZ Setup”, “CH Setup”, “Parental CTRL”, “\
Reset”, “Color System” or “Software 
Update”,  and the Secret number...