Sharp Lc 32d44 Operation Manual

1
IMPORTANT  :  Please read this operation manual before starting operating the equipment.
LC-32D44U
LC-37D44U
LIQUID CRYSTALTELEVISION
 
OPERATION MANUAL
ENGLISH
Supplied Accessories
Make sure the following accessories are provided with the product.
Remote control unit 
(g 1)
Page 7 “AA” size battery 
(g 2)
Page 8 AC cord
(g 1)
Page 7 Stand unit 
(g 1)
Page 6
Cable clamp 
(g 1)
Page 7 Operation manual 
(g 1)
To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning....

2
IMPORTANT:
To aid reporting in case of loss or theft, please record 
the TVs model and serial numbers in the space 
provided. The numbers are located at the rear of the TV.Model No.:
Serial No.:
IMPORTANT INFORMATION
WARNING: 
TO REDUCE THE RISK OF FIRE OR ELECTRIC 
  SHOCK, DO NOT EXPOSE THIS PRODUCT TO 
  RAIN OR MOISTURE.
CAUTIONRISK OF ELECTRIC SHOCK 
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO...

3
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of 
 Dolby Laboratories.
This product utilizes tin-lead solder, and uorescent lamp 
containing a small amount of mercury. Disposal of these 
materials may be regulated due to environmental considerations. 
For disposal or recycling information, please contact your local
authorities, the Electronic Industries Alliance: www.eiae.org, the 
lamp recycling organization: www.lamprecycle.org or 
Sharp at...

4
Electricity is used to perform many useful functions, but it can also ca\
use personal injuries and property damage 
if improperly handled. This product has been engineered and manufactured with the highest priority on safety. 
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please 
observe the following instructions when installing, operating and cleani\
ng the product. To ensure your safety 
and prolong the service life of your Liquid Crystal...

5
IMPORTANT SAFETY INSTRUCTIONS
 Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna 
system is grounded so as to provide some protection against 
voltage surges and built-up static charges.
  Article 810 of the National Electrical Code, ANSI/NFPA 70,  provides information with regard to proper grounding of the 
mast and supporting structure, grounding of the lead-in wire 
to an antenna discharge unit, size of grounding conductors, 
location of...

6
1
2
Screws
Hex key
Soft cushion
Attaching/Detaching the Stand
 Before attaching (or detaching) the stand, unplug the AC  cord from the AC INPUT terminal.
 Before performing work spread cushioning over the base        area to lay the TV on. This will prevent it from being 
damaged.
CAUTIONAttach the stand in the correct direction.
 Do not remove the stand from the TV unless using an 
optional wall mount bracket to mount it.
 Be sure to follow the instructions. Incorrect installation 
of the stand may...

7
Using the Remote Control UnitUse the remote control unit by pointing it towards the remote control se\
nsor on the TV. Objects between the 
remote control unit and the remote control sensor may prevent proper ope\
ration.
30º 30º30º
30º
17´ (5 m)
Remote Control sensor
■ 
Cautions regarding the remote control unit Do not expose the remote control unit to shock. In addition, 
do not expose the remote control unit to liquids, and do not 
place in an area with high humidity.
 Do not install or place the...

8
Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a b\
rief explanation of the types of connections 
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm\
 coaxial cable with an F-type connector, 
plug it into the antenna terminal at the rear of the TV set.
1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (Commercially 
available).
F-type connector
300-ohm twin-lead cable ( at)...

9
Part Names
TV (Front)
OPC indicator (See page 18.)
POWER  indicator (See page 12.)
OPC sensor (See page 18.)Remote control sensor
SLEEP indicator 
(See page 13.)
TV (Top/Rear)
POWER  button
INPUT 
buttonMENU 
button
Channel buttons
(
CH V/U )
Volume buttons
( VOL //. )
DIGITAL AUDIO OUTPUT terminal
INPUT 4 terminal (HDMI) INPUT 5 terminals (HDMI) INPUT 6 terminals (PC-IN)
Antenna/Cable in
INPUT 1 terminals
INPUT 2 terminals AUDIO OUTPUT terminals
SERVICE terminal
INPUT 3 terminals
AC INPUT terminal
-
$...

10
11
17
19
12
13
14
15
16
20
21
22
18
3 2
7
6
1
4
5
8
10
9
Part Names
Remote Control Unit1  POWER:  Switch the TV power on or enters 
standby. (See page 12.)
2   CC:  Display captions from a closed-caption 
source. (See page 15.)
3   AUDIO:  Selects the MTS/SAP or the audio mode 
during multi-channel audio broadcasts. (See page 
14.)
4   0–9:  Set the channel. (See page 13.)
5    (DOT):  (See page 13.)
6   FLASHBACK:  Return to the previous channel or 
external input mode. (See page 14.)
7   VIEW MODE:...