Sharp Lb 1085 Operation Manual

 19
Sleep Timer
Allows you to set a time when the LCD Monitor 
automatically switches to standby.
Press SLEEP. 
The remaining time displays when the sleep timer has 
• 
been set.
Each time you press 
•  SLEEP, the remaining time 
switches as shown below.
Of f      30      60      90      120 (minute)
When set, the time automatically starts counting down.
• 
If you want to adjust the sleep timer, you can press 
• 
SLEEP twice then change the time setting.
Five minutes before the time expires, the...

 20
Direct Button Operation
VIEW MODE
You can select the screen size.
1 Press VIEW MODE.
The View Mode menu displays.
• 
The menu lists the View Mode options selectable for the type of video signal currently being received.
• 
2 Press VIEW MODE or  /  while the View Mode menu is displayed to select a desired item on the menu.
You can sequentially select a View Mode that has its own aspect ratio.
• 
For 4:3 programs
 
■
Example: Screen size images
Side Bar S.Stretch (Smart stretch) ZoomStretch
Suitable...

 21
On-Screen Display Menu
Menu Items
For INPUT 1/2/3 Mode
Picture Menu
OPC ........................................................................\
....... Page 23
Backlight  ........................................................................\
 Page 23
Contrast   ........................................................................\
 Page 23
Brightness  ..................................................................... Page 23
Color...

 22
On-Screen Display Menu
On-Screen Display Menu Operation
Example
Picture
Contrast OPC
Brightness
Color
Ti nt
Sharpness
Advanced
Reset [+30]
[    0]
[    0]
[    0]
[  +2]
0
-30
-30
-30
-10 +40
+30
+30
+30
+10
Backlight
[+12]-16 +16
Of
fOnOn : Display
ENTER: Select : EnterMENU: ExitRETURN: Back
The bar above is an operational guide for 
the remote control. The bar will change in 
accordance with each menu setting screen.
 Press  /  to select the desired item.
 Press  /  to select the desired item....

 23
On-Screen Display Menu
Picture Menu
Adjusts the picture to your preference with the 
following picture settings.
Example
Picture
Contrast OPC
Brightness
Color
Ti nt
Sharpness
Advanced
Reset [+30]
[    0]
[    0]
[    0]
[  +2]
0
-30
-30
-30
-10 +40
+30
+30
+30
+10
Backlight
[+12]-16 +16
Of
fOnOn : Display
1 Press MENU to display the MENU screen, and 
then press 
 /  to select “Picture”.
2 Press  /  to select a specific adjustment 
item.
Select “Advanced” and then press 
•  ENTER to set 
“C.M.S....

 24
Quick Shoot
Use Quick Shoot operation to view fast-action video 
more clearly.
On: Quick Shoot function is on.
Off: Normal viewing mode.
Quick Shoot may cause image noise. If this occurs turn 
• 
the function “Off”.
Active Contrast
Automatically adjusts the image contrast according 
to the scene.
On: Automatically adjusts the image contrast.
Off: No adjustment.
I/P Setting
Converts input signals depending on the type of 
images.
Fast: Suitable for fast-moving images
Slow:  Suitable for smooth images...

 25
On-Screen Display Menu
Audio Menu
You can adjust the sound quality to your preference 
with the following settings.
Example
Audio
T reble
Bass
Balance
Surround
Reset [Of
f]
-15
L +15
[  0]
[  0]
[  0]-15
+15
R
1 
Press MENU to display the MENU screen, and 
then press 
 /  to select “Audio”.
2 Press  /  to select a specific adjustment 
item.
Select “Surround” and then press 
•  ENTER to set 
the item.
3  Press  /  (or  / ) to select the desired 
setting, and then press ENTER.
4  Press MENU to exit....

 26
Setup Menu
Example
EZ Setup
Input Skip
Position
Language
Identification
Reset[English]
Setup
1 
Press MENU to display the MENU screen, and 
then press 
 /  to select “Setup”.
2 Press  /  to select a specific adjustment 
item, and then press ENTER.
3  Press  /  (or  / ) to select the desired 
setting, and then press ENTER.
4  Press MENU to exit.
EZ Setup
This function allows you to change the preset 
values.
Language: Select from among 4 languages (English, 
French, Spanish and German).
Monitor...

 27
Position
For adjusting a picture’s horizontal and vertical 
position.
H-Pos.: Centers the image by moving it to the left or right.
V-Pos.: Centers the image by moving it up or down.
For resetting adjustments to the factory preset values, 
• 
press 
 /  to select “Reset”, and then press 
ENTER.
When connecting a PC to the HDMI terminal, the 
• 
image position will be automatically adjusted. It cannot 
be manually adjusted.
The screen position variable ranges depend on the 
• 
View Mode or the signal...

 28
HDMI Setup
To watch an HDMI equipment image, select “INPUT 
4”, “INPUT 5” or “INPUT 6” from “INPUT SOURCE” 
menu using INPUT on the remote control unit or on 
the LCD Monitor.
Auto View:
Enable: To use View Mode based on signal recognition, including an HDMI signal.
Disable: No function.
Audio Select: Digital: For an audio signal via the HDMI terminal.
Analog: For an audio signal via the L/R Audio Terminals (INPUT 6).
Refer to your external equipment operation manual for 
• 
the signal type.
“Audio...