Sharp Lb 1085 Operation Manual

LB-1085
ENGLISH
FRANÇAIS
ESPAÑOL
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
LCD MONITOR
MONITEUR LCD
MONITOR LCD
ENGLISH  ......EN1
FRANÇAIS  ...FR1
ESPAÑOL  ..... ES1
 

 1
LB-1085
LCD MONITORENGLISH
The lightning flash with arrow-head 
symbol, within an equilateral triangle, 
is intended to alert the user to the 
presence of uninsulated “dangerous 
voltage” within the product’ s 
enclosure that may be of suf ficient 
magnitude to constitute a risk of 
electric shock to persons.
The exclamation point within a 
triangle is intended to alert the user to 
the presence of important operating 
and maintenance (servicing) 
instructions in the literature 
accompanying the...

 2
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly 
approved by the manufacturer could void the user’s authority to operate this equipment.
CAUTION:
This  product  satisfies  FCC  regulations  when  shielded  cables  and  connectors  are  used  to  connect  the  unit  to  other 
equipment. To prevent electromagnetic interference with electric appliances such as video equipment, use shielded cables 
and connectors for connections.
DECLARATION...

 3
Trademarks
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks 
• 
of HDMI Licensing LLC.
 

 4
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp LCD Monitor. To ensure safety and many years of trouble-free 
operation of your product, please read the Important Safety Instructions\
 carefully before using this product.
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also ca\
use personal injuries and property damage 
if improperly handled.  This product has been engineered and manufactured with the highest prior\
ity on safety . 
However,...

 5
Turn off the main power and unplug the AC cord from the wall outlet befo\
re handling.
• 
Use a soft cloth and gently wipe the surface of the display panel. Using\
 a hard cloth may   
• 
scratch the panel surface.
Use a soft damp cloth to gently wipe the panel when it is really dirty.  
• 
(It may scratch the panel surface when wiped strongly.)
If the panel is dusty, use an anti-static brush, which is commercially a\
vailable, to clean it.
• 
To protect the panel, do not use a dirty cloth, liquid...

 6
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
Check that this monitor is securely installed when using it. If it is not securely installed, it may fall over or fall down, resulting in 
injury.
Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, 
severe physical damage or other loss, including nuclear reaction control\
 in nuclear facility, medical life support system, and 
missile launch control in a weapon system.
The fluorescent tubes...

 7
Supplied Accessories
Make sure the following accessories are provided with the product.
 Remote control unit 
(x1)
Page 10  “AA” size battery (x2)
Page 10 
 AC cord clamp (x1) 
Page 9
  
AC cord (x1) 
Page 9
  Operation manual 
(x1)

 M16 bolt cap 
(x2)
Do not use an AC cord other than the one supplied with the monitor.
• 
When the eye bolts on the top are removed, close the holes by pressing t\
he M16 bolt caps into the holes. To 
• 
remove the M16 bolt caps, turn them with a screw driver or...

 8
QUICK REFERENCE
Connecting External Speakers
Speaker Compatibility:
Be sure to use external speakers with an impedance of 4 ohm and a rated 
• 
input of at least 15W.
Connect the ends of the cables to the SPEAKER terminals as shown 
below. Connect the leads to the SPEAKER terminals of the same 
polarity.
R L
SPEAKER R terminal
To external speaker (right) SPEAKER L terminal
To external speaker (left)
Make sure to connect the speaker jack and cable polarity (
 
■, ) properly.
The speaker terminals have...