Sharp Lb 1085 Operation Manual

 9
QUICK REFERENCE
When transporting the LCD Monitor
Transporting the LCD Monitor requires special skill that should only be performed by qualified service 
personnel. Customers should not attempt to do the work themselves.
Before turning on the LCD Monitor
1 Connect the AC plug for the LCD Monitor into 
the AC outlet.
Be sure to turn OFF the main 
•  POWER on the rear 
of the LCD Monitor when connecting the cord.   
Fix the AC cord as shown below.
2
1
3
4
AC outlet
Place the LCD Monitor close to the AC...

 10
10º10º
10º
10º
16.4 feet (5 m)
Remote control sensor
If the remote control fails to operate LCD Monitor functions, replace th\
e batteries in the remote control unit.
1 
Open the battery cover.
2  Insert two “AA” size batteries  
(supplied with the product).
3  Close the battery cover.
 
CAUTION
Use manganese or alkaline batteries only.
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Do not mix batteries of different types. Different...

 11
IMPORTANT INFORMATION ................................ 1
Trademarks  ........................................................... 3
DEAR SHARP CUSTOMER  .................................. 4
IMPORTANT SAFETY INSTRUCTIONS  ............... 4
Supplied Accessories  .......................................... 7
QUICK REFERENCE  ............................................. 7
Installing the LCD Monitor onto a Stand  ........... 7
Connecting External Speakers  ......................... 8
Using the Remote...

 12
Part Names
LCD Monitor (Front)
OPC indicator (See page 23.)
POWER indicator (See page 17.)
OPC sensor (See page 23.) Remote control sensor
SLEEP indicator (See page 19.)
LCD Monitor (Rear/Side)
INPUT 3
terminals
UnusedINPUT 4 terminal
(HDMI)
INPUT 5 terminal
(HDMI)
INPUT 6 terminals
(HDMI)
INPUT 7 terminals
(DVI)
DIGITAL AUDIO
OUTPUT terminal
INPUT 1 terminals OUTPUT terminals AC INPUT 
terminal
INPUT 2 terminals RS-232C terminal SPEAKER terminals
POWER button
MENU button
INPUT button
Select buttons...

 13
Remote Control Unit
1
2
39
11
10
7
8
5
6
4
When using the remote control unit, point it at the LCD 
• 
Monitor.
Part Names
1  POWER: Switch the LCD Monitor power on or enters 
standby. (See page 17.)
2  INPUT: Select an LCD Monitor input source. (INPUT 
1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6, 
INPUT 7)  (See page 19.)
3  SLEEP: Set the sleep timer. (See page 19.)
4  RETURN: Return to the previous menu screen.
5  AV MODE: Select an audio or video setting.   
(When the input source is INPUT 1,...

 14
Preparation
You can connect many types of external equipment to your LCD Monitor like a Blu-ray disc player, DVD 
player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source 
images, select the input source from INPUT on the remote control unit or on the LCD Monitor. (See page 
19.)
CAUTION
To protect equipment, always turn off the LCD Monitor before connecting any external equipment.
• 
Please read the relevant operation manual (Blu-ray disc player, etc.)...

 15
Preparation
When using DVI Cable (INPUT 7):
DVI cable 
(commercially available)
Ø 3.5 mm stereo minijack cable 
(commercially available)
Blu-ray disc player/DVD player
To enjoy 1080p display capability, connect your external equipment using a component or DVI cable and set the 
• 
equipment to 1080p output.
Using Digital Audio Output
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal\
. PCM audio outputs from the 
terminal.
To optical digital input of 
external audio devices...

 16
Connecting a PC
When connecting to a PC with a DVI terminal (INPUT 7):
PCØ 3.5 mm stereo minijack cable 
(commercially available) RGB/DVI conversion cable 
(commercially available)
When connecting to a PC with an HDMI terminal (INPUT 4, 5 or 6):
HDMI-certified cable 
(commercially available)
PC
The HDMI terminals only support digital signal.
• 
If you are connecting the LCD Monitor to a PC with a DVI terminal, use a DVI cable (commercially available) instead 
• 
of a RGB/DVI conversion cable.
PC...

 17
Turning On/Off the Power
Press POWER on the LCD Monitor, or POWER on the remote 
control unit to turn the power on.
POWER indicator (Blue): The LCD Monitor is on. (After a few seconds, \
• 
a window appears with sound.)
The initial setup starts when the LCD Monitor powers on for the first 
• 
time. If the LCD Monitor has been turned on before, the initial setup wi\
ll 
not be invoked. For changing the settings of the initial setup, perform 
EZ setup on the Setup menu on page 26.
When the main POWER...

 18
Direct Button Operation
Changing Volume
You can change the volume by pressing VOL  /  
on the LCD Monitor or on the remote control unit.
To increase the volume, press 
•  VOL .
To decrease the volume, press 
•  VOL 
.
20
Audio status
Output deviceOutput Select
Fixed Variable
Speaker Variable sound Mute
When “Output Select” is set to “Variable”, the indicator 
• 
on the screen changes as shown below.
60
See page 28 for details on the Output Select function.
• 
MUTE
Mutes the current sound output....