Sharp DX B450P User Manual

User’s Guide6-5
Navigating the EWS
Embedded Web Server
Network Settings Protocol Settings TAB: TCP/IP
TCP/IP: TCP/IP, DHCP, IPv6, IP 
Address, Subnet Mask, Default 
GatewaySettings related to the TCP/IP 
protocol.
Network Settings Protocol Settings TAB: Netware
Netware: Netware, Mode, Netware 
Frame
PSERVER: Print Server Name, NDS 
Tree Name, NDS Context, Job Poll 
Interval
NPRINTER: Print Server Name, 
Remote Printer NumberSettings related to Netware 
setup.
Network Settings Protocol Settings TAB:...

6-6User’s Guide
Navigating the EWS
Embedded Web Server
Downloaded From ManualsPrinter.com Manuals 

7-1
Chapter 7: Networking
The DX-B350P/B450P is a fast network capable printer 
and supports an Ethernet 10/100 Base-Tx network 
connection. 
Protocols
The following protocols are supported:
Initial Setting of the Printer’s IP Address
All devices on the network must have an IP address. The 
printer comes configured from the factory to obtain an 
address automatically from your network’s DHCP server. 
If your network does not support DHCP or you want to set 
the printer to a specific IP address, you must...

7-2User’s Guide
Configuring the Driver
Networking
Setting the Network Configuration Manually
You can make changes to the printer’s default network configuration using the Operator Panel. 
Once the settings for DHCP or IP address are changed, the printer automatically re-initializes. 
To manually set the printer’s IP address:
1.Navigate through the menus to the Interface> Network 1 Setup sub menu.
2.Navigate through the Network 1 Setup items to set all of the following items: 
IP Address
Subnet mask...

User’s Guide7-3
Printer Network Configuration
Networking
Printer Network Configuration
The Operator Panel and the Embedded Web Server allow control of many Network 
configuration settings.
Network Protocol Configuration
The following protocols can be enabled or disabled:
I/O Port Configuration
The following I/O ports can be enabled or disabled:
Hub Link Speed/Duplex Configuration
The network interface configuration includes a menu for setting Hub Link Speed and duplex. 
This menu includes the following...

7-4User’s Guide
Notifications
Networking
Notifications
Automatic notifications of printer unavailability during printing can be sent in the following 
ways:
IP Filtering
The purpose of IP filtering is to limit access to the printer to only those Host computers that 
have IP addresses within IP ranges predefined on the configuration page. The IP configuration 
page, accessible from the EWS (when logged in as administrator), has enable and disable 
parameters. When IP filtering is disabled, all network...

User’s Guide7-5
IPv6 Implementation
Networking
IPv6 Implementation
Specifications
The IPv6 implementation conforms to the following IETF documents:
Operational Information
IPv6 enabled devices can auto configure their IPv6 address. This happens automatically 
whenever there is an IPv6 enabled router on the subnet to which the device is connected. The 
printer unique ID is obtained from the Ethernet MAC address. The router may advertise 
multiple network prefixes, depending on the network configuration....

7-6User’s Guide
SNMP
Networking
In an SNMP agent, parameters are arranged in a tree. SNMP uses an Object Identifier (OID) to 
specify the exact parameter to set or get in the tree. An OID is a list of numbers separated by 
periods. An OID is a combination of two values. The first value is the OID of the generic object 
and the second is the instance value, which specifies the particular instance of the object. 
Every SNMP agent has an address book of all its objects, called the MIB or Management...

8-1
Chapter 8: Accessories
The following optional accessories are available for this 
printer:
1.Tray Module (A4/Letter, 550 Sheets) Tray 3, Tray 4
2.Duplex Module
3.Offset Catch Tray
4.Hard Disk Drive
5.Memory Expansion Module
6.Compact Flash (CF) Card
12
3
4
56
In this Chapter...
 Tray module (A4/
Letter, 550 sheets) 
 Paper trays 
 Duplex module 
 Offset Catch Tray 
 Memory 
Expansion Module 
 Hard Disk Drive 
 Compact Flash 
(CF) Card 
Downloaded From ManualsPrinter.com Manuals 

8-2User’s Guide
Tray module (A4/Letter, 550 sheets)
Accessories
Tray module (A4/Letter, 550 sheets)
NOTE:You can add up to two Tray Modules.
NOTE:Tray Modules differ by model and can not be interchanged.
Installing/Uninstalling the Tray Module
The optional Tray Module (A4/Letter, 550 sheets) is available for this printer. 
The weight of this printer, without the optional accessories, paper trays, Toner Cartridge and 
paper, is 22.0 kg/48 lbs. Before moving the printer, you must uninstall the optional...