Sharp Ar M201 Manual

INSTALLING THE SOFTWARE
39
5
7To install all of the software, click 
the Standard button and go to 
step 12.
To install particular packages, 
click the Custom button and go 
to next step.
8Click the MFP Driver button.
Click the Display Readme button to 
show information on packages that are 
selected.
9Select Connected to this 
computer and click the Next 
button.
Follow the on-screen instructions.
 If you are using Windows Vista and a security warning window 
appears, be sure to click Install this...

INSTALLING THE SOFTWARE
40
10You will return to the window of step 8. If you wish to install 
Button Manager or Sharpdesk, click the Utility Software 
button.
If you do not wish to install the Utility Software, click the Close button and 
go to step 12.
Installing the Utility Software
11Click the Button Manager or the 
Sharpdesk button.
Click the Display Readme button to 
show information on packages that are 
selected.
Follow the on-screen instructions.
After the installation, a message prompting you to...

INSTALLING THE SOFTWARE
41
5
12When installing is finished, click the Close button.
A message will appear instructing you to connect the machine to your 
computer. Click the OK button.
13Make sure that the power of the machine is turned on, and then 
connect the USB cable (p.42).
Windows will detect the machine and a Plug and Play screen will appear.
14Follow the instructions in the plug and play window to install 
the driver.
Follow the on-screen instructions.
This completes the installation of the...

INSTALLING THE SOFTWARE
42
Connecting a USB cable
Follow the procedure below to connect the machine to your computer.
A USB cable for connecting the machine to your computer is not included with the 
machine. Please purchase the appropriate cable for your computer.
1Insert the cable into the USB 
connector on the machine.
2Insert the other end of the cable into your computers USB port.
 USB is available with a PC/AT compatible computer that was 
originally equipped with USB and had Windows 98, Windows...

INSTALLING THE SOFTWARE
43
5
Using the machine as a shared printer
If the machine will be used as a shared printer on a network, follow these steps to
install the printer driver in the client computer.
1Perform steps 2 through 6 in INSTALLING THE SOFTWARE 
(p.38).
2Click the Custom button.
3Click the MFP Driver button.
Click the Display Readme button to 
show information on packages that are 
selected.
4Select Connected via the 
network and click the Next 
button.
To configure the appropriate settings in...

INSTALLING THE SOFTWARE
44
5Click the Add Network Port 
button.
In Windows Vista, the Add Network 
Port button does not appear.
6Select the network printer that is 
shared and click the OK button.
Ask your network administrator for the 
server name and printer name of the 
machine on the network.
7In the printer port selection window, verify the network printer 
that is shared and whether the machine is to be used as the 
default printer, make the selections and click the Next button.
Follow the...

45
5
SETTING UP BUTTON MANAGER
Button Manager is a software program that works with the scanner driver to enable 
scanning from  the machine.
To scan using the machine, Button Manager must be linked with the scan menu on 
the machine. Follow the steps below to link Button Manager to scanner events.
Windows XP/Vista
1Click the start button, click Control Panel, click Printers 
and Other Hardware, and then click Scanners and Cameras.
In Windows Vista, click the Start button, select Control Panel and click...

INSTALLING THE SOFTWARE
46
5Select Start this program and 
then select Sharp Button 
Manager T from the pull-down 
menu.
6Click the Apply button.
7Repeat Steps 4 through 6 to link Button Manager to SC2: 
through SC6:.
Select SC2: from the Select an event pull-down menu. Select Start this 
program, select Sharp Button Manager T from the pull-down menu, and 
then click the Apply button. Do the same for each ScanMenu through 
SC6:.
When the settings have been completed, click the OK button to close the...

INSTALLING THE SOFTWARE
47
5
Windows 98/Me/2000
1Click the Start button, select Settings, and then click 
Control Panel.
2Double-click the Scanners and Cameras icon.
3Select SHARP AR-XXXX and click the Properties button.
In Windows Me, right click SHARP AR-XXXX and click Properties in the 
pop-up menu.
4In the Properties screen, click the Events tab.
5Select SC1: from the Scanner 
events pull-down menu.
If the Scanners and Cameras icon does not appear in Windows Me, 
click view all Control Panel...

INSTALLING THE SOFTWARE
48
6Select Sharp Button Manager T 
in Send to this application.
7Click the Apply button.
8Repeat Steps 5 through 7 to link Button Manager to SC2: 
through SC6:.
Select SC2: from the Scanner events pull-down menu. Select Sharp 
Button Manager T in Send to this application and click the Apply button. 
Do the same for each ScanMenu through SC6:.
When the settings have been completed, click the OK button to close the 
screen.
Button Manager is now linked to the scan menu  (1 through...