Sanyo VPC S60EX User Manual

35English
CAPTURING AND PLAYING BACK STILL IMAGES
Magnifying (zooming in) the image
1 Display the image that you want to magnify.
2 Press [T] ([]]) on the zoom 
switch.
hMagnification is enabled.
hThe image is magnified, and the 
central portion of image is 
displayed.
hPress the arrow buttons to view 
different parts of the magnified 
image.
To magnify:
Magnification increases with 
each press of [T] ([]]) on the 
zoom switch.
To return to normal size:
Magnification decreases with 
each press of [W]...

English36
Zoom jump playback
You can magnify a portion of a still image to check the accuracy of the focus.
1 Display a still image to view 
using zoom jump playback.
2 Press the SET button.
hThe image is magnified.
hIf the magnified view appears 
to be in focus, then the 
overall image will be in focus.
3 Press the arrow buttons to 
move to the part you wish to 
magnify, and press [T] ([]]) 
on the zoom switch. 
hThe displayed area is further 
magnified.
To magnify further: 
Magnification increases with...

37English
CAPTURING AND PLAYING BACK STILL IMAGES
Erasing files
You can erase files that are stored on the card if you no longer need them. 
You can erase the files one at a time, or all at once.
1 To erase data from the card, perform the delete procedure with the 
card installed in the camera. To erase data from the camera’s 
internal memory, remove the card before performing the delete 
procedure.
2 Set the camera to the playback 
mode, and press the [n] button.
hThe Delete Screen appears.
DELETE ALL:...

English38

1Use the [l] and [m] buttons to display the file you wish to delete.
2Press the [n] or [o] button to select DELETE SINGLE.
3Press the SET button.
hThe currently displayed file is deleted.
hTo delete other files, repeat steps 1 to 3.
CAUTION
About protected images
iFiles that are protected from accidental erase cannot be erased. To erase 
protected files, set the protect setting for the file to off (page 68), and then 
follow the file delete procedure.
Downloaded From camera-usermanual.com...

39English
SHOOTING SEQUENTIAL SHOTS
When the shutter button is pressed, still images are captured in succession.
1 Set the camera to the sequential 
shots mode (page 27).
hIf the resolution is set to k, the 
setting changes automatically to 
{.
2 Press the shutter button to start 
shooting.
hSequential shots shooting begins.

  * The maximum number of 
sequential shots will differ 
depending on the subject.
hNote that if the shutter button is 
released during shooting, shooting 
stops immediately.
HINT...

English40
VIDEO CLIP RECORDING AND PLAYBACK
Recording a video clip
1 Set the camera to the video 
clip recording mode 
(page 27).
2 Press the shutter button.
hVideo clip recording 
begins. During recording, 
the recording time is shown 
on the monitor.
hIt is not necessary to 
continue pressing the 
shutter button while 
shooting.
3 End the recording.
hPress the shutter button 
again to stop recording and 
save the video clip.
00:45:0000:45:0000:45:00
Shutter button
Video clip shooting icon
Downloaded...

41English
VIDEO CLIP RECORDING AND PLAYBACK
Playing back the video clip
4 Press the playback button 
[=].
hIf the playback button [=] 
was pressed to turn the 
camera on, however, press 
the playback button [=] for 
at least 1 second.
hThe video clip just recorded 
appears on the monitor.
hVideo clips are indicated by 
a video clip pattern along 
the top and bottom of the 
screen.
5 Press the SET button.
hVideo clip playback begins.
hTo stop playback, press the 
[o] button....

English42
Outline of playback operation
When you are finished viewing video clips...
iPress the ON/OFF button to turn the camera off.
CAUTION
If no audio is heard...
The audio is not played back when the video clip is played back in the frame-
by-frame, fast playback or reverse playback mode.
To do this...Do this
Stop playback During playback, press the [o] button
PauseDuring playback, press the SET button.
During accelerated playback, press the [n] button.
To extract a still imageWhile playback is...

43English
VIDEO CLIP RECORDING AND PLAYBACK
CAUTION
The data for a video clip is very large. 
iTherefore, be aware that if the video clip is uploaded to a computer to be 
played back, the computer may not be able to play back the video fast 
enough, making it appear jerky. (The video will always be displayed 
properly on the monitor.)
If video clip recording stops even when there is card memory 
remaining…
iDepending on the card you are using, recording may stop even if there is 
remaining memory in the...

English44
USING THE SCENE FUNCTION
You can select from a variety of preset settings (aperture, shutter speed, etc.) 
for specific shooting conditions.
1 Set the camera to the shooting 
mode (page 26), and press the 
SCENE button.
hThe screen to select the settings 
suitable for the scene (shooting 
conditions) appears.
2 Use the arrow buttons to select the 
desired setting.

Scene settingFeaturesShooting mode setting
cPX
X
AutoThe camera makes the 
optimum settings.mmm
Y
SportsCapture a split-second...