Sanyo VPC S60EX User Manual

85English
SOUNDS
Set the sounds (SOUNDS) that are produced by the camera.
1 Display the Option Menu (page 82).
2 Select “SOUNDS” and press the 
SET button.
hThe screen to set the sounds 
appears.
OPERATION VOL:
Volume setting for all camera buttons.
TURN ON/OFF:
Mute or enable the sound that is 
produced when the camera is turned 
on or off.
SHUTTER:
Select the sound that is produced 
when the shutter button is pressed.
KEY SW:
Select the sound that is produced 
when a camera button (SET button, 
MENU...

English86
3 Select the desired item, and press the SET button.
4 Press the [n] or [o] button to change the setting.

hThe respective screen to enable or disable the sound appears.
ON:Activates the sound.
OFF:Deactivates the sound.

hThe respective screen to select the sound appears.
hSelect from 5 different sounds (A to E) and “OFF”.
hAfter selecting a sound, press the [m] button to preview it.
hIf “OFF” is selected, no sound is produced.

hThe screen to select the volume setting appears.
hYou can select...

87English
POST-VIEW SETTING
Specify the duration that the captured image appears on the monitor (post-
view) after the shutter button is pressed.
1 Display the Option Menu (page 82).
2 Select “POST VIEW” and press the 
SET button.
hThe Post View Menu appears.
1SEC:
The post-view image is displayed 
for 1 second.
2SEC:
The post-view image is displayed 
for 2 seconds.
OFF:
The post-view image is not 
displayed.
3 Select the desired setting, and press the SET button.
hThis completes the post-view setting....

English88
SCREEN LANGUAGE
You can set the monitor of your camera to display the messages in any one of 
several languages.
1 Display the Option Menu (page 82).
2 Select “LANGUAGE” and press the 
SET button.
hThe screen to select the display 
language appears.
DEUTSCH:German
ENGLISH:English
ESPAÑOL:Spanish
FRANCAIS:Frenc h
ITALIANO:Italian
NEDERLANDS:Dutch
:Russian
:Japanese
:Korean
:Chinese (traditional)
:Chinese (simplified)
3 Select the desired language, and press the SET button.
hThe selected display...

89English
TV SYSTEM SETTING
Specify the type of image signal that is output from your camera’s PC/AV 
terminal.
1 Display the Option Menu (page 82).
2 Select “TV SYSTEM” and press the 
SET button.
hThe TV System Menu appears.
NTSC:
Outputs NTSC video signals.
PA L :
Outputs PAL video signals.
3 Select the desired setting, and 
press the SET button.
hThe selected TV system is set.
HINT
If no image appears on the TV...
iIf the TV system setting is not correct for the connected equipment, no 
image will...

English90
AUTO POWER OFF FUNCTION
Your camera has an “auto power off” function whereby the power 
automatically turns off after a specified period of inactivity. The auto power off 
function works to conserve the battery power when the camera is not being 
used, or to prevent the batteries from dying if the camera has accidentally 
been left on. You can specify the elapsed time (standby time) before the auto 
power off function operates to turn the camera off.
1 Display the Option Menu (page 82).
2...

91English
AUTO POWER OFF FUNCTION
3 Select the desired option, and press 
the SET button.
hThe Standby Time Menu appears.
4 Press the [n] or [o] button to select 
the standby time.
5 Press the SET button.
hThe auto power off function is set.
hTo return to the Option Menu, press 
the [l] button.
OKOK
AUTO POWER OFFAUTO POWER OFF
RECORDING
PLAYBACK1 min
3 min
5 min
10 min

Downloaded From camera-usermanual.com Sanyo Manuals 

English92
FILE No. RESET FUNCTION
If a newly formatted  (page 95) card is used, the file name (image number) of 
the captured image automatically begins from 0001. If the card is 
subsequently reformatted, or if a different reformatted card is used, the file 
names again begin from 0001. This is because the file number reset function 
is set to “ON”, and consequently it results in more than one card containing 
images with the same numbers. By setting the file number reset function to 
“OFF”, even if the...

93English
FILE No. RESET FUNCTION
iIf Card B already has image data in it when it replaces Card A, file names 
are assigned as follows.
When the highest image number on Card B (before replacing) is 
lower than the highest image number on Card A: the file name of the 
next recorded image continues from last file name recorded on Card A.
When the highest image number on Card B (before replacing) is 
higher than the highest image number on Card A: the file name of the 
next recorded image continues from...

English94
1 Display the Option Menu (page 82).
2 Select “FILE NO. RESET” and press 
the SET button.
hThe File Number Reset Menu 
appears.
ON:
The file number reset function is “ON”.OFF:
The file number reset function is 
“OFF”.
3 Select “OFF”, and press the SET button.
hThe file number reset function was set to OFF.
HINT
iUntil the file number reset function is turned “ON”, consecutive file names 
are assigned. It is recommended that the file number reset function be 
returned to “ON” at the end of each...