Sanyo VPC S60EX User Manual

45English
USING THE SCENE FUNCTION
m: Availablen: Not available
3 Press the SET button.
hThis completes the scene select 
setting.
hThe display returns to the Shooting 
Screen.
hThe scene function setting is shown 
on the monitor.
Scene settingFeaturesShooting mode setting
cPX
^
FireworksFor capturing fireworks at 
night.mnm
_
LampPhotograph in low-light 
conditionsmnm
a
Still image with 
soundShoot a still image and add a 
voice memo.mnn
7
CosmeticSkin tones are enhanced in 
close-up shots.mmm
8...

English46
Capture a still image with a voice memo
With the still-image-plus-audio a scene function, you can add an audio 
track (about 10 seconds maximum) to a captured still image. This audio track 
is called a “voice memo”.
1 On the screen to select the scene function settings (page 44), select 
a, and press the SET button.
2 Press the shutter button to take the picture, then speak into the 
microphone.
hDuring recording, be careful not to obstruct the microphone with your 
fingers, for example.
hThe...

47English
USING THE ZOOM
Your camera has two zoom functions: optical zoom and digital zoom.
1 Set the camera to the shooting 
mode (page 26), and point the 
camera lens at the subject.
2 Press the zoom switch to 
compose the desired image.
[T]: Zoom in on the subject.
[W]: Zoom out.
hWhen the zoom switch is 
pressed, the zoom bar appears 
on the monitor.
hWhen the optical zoom factor is 
at maximum, zooming stops 
temporarily. When [T] on the 
zoom switch is pressed again, 
the mode changes to the...

English48
FLASH SETTING
The flash is used not only for taking pictures where there is insufficient light, 
but also when the subject is in shade or in backlight conditions. Your camera’s 
flash has four modes of operation (automatic flash mode, forced flash mode, 
flash off mode and red-eye reduction mode). Select the flash mode that is 
appropriate for the surrounding conditions. The flash can be enabled only 
when taking single-shot still images.
1 Set the camera to the single-shot 
shooting mode (page...

49English
FLASH SETTING
2 Press the [n] or [o] button to select the desired flash mode, and 
press the SET button.
3 Press the shutter button. 
hThe picture is snapped and the flash operates according to the 
selected mode.
HINT 
In the automatic flash mode... 
iIn the automatic flash mode, when the subject is in focus, a k icon 
appearing on the monitor indicates that the flash will operate.
Downloaded From camera-usermanual.com Sanyo Manuals 

English50
SELF-TIMER
Self-timer photography is available in the single-shot shooting mode.
1 Set the camera to the shooting 
mode (page 26), and press the [m] 
button.
2 Use the [n] and [o] buttons to select 
the self-timer setting.
3 Press the SET button.
hThis completes the self-timer setting. y: The image is captured about 
2 seconds after the shutter button 
is pressed.
x: The image is captured about 
10 seconds after the shutter button 
is pressed.
PHOTOGRAPH 1 IMAGE
Self-timer menu
Downloaded From...

51English
SELF-TIMER
HINT
To pause or cancel the self-timer function...
iIf the shutter button is pressed again before the shutter is released, the 
self-timer countdown temporarily stops. Press the shutter button one more 
time to restart the self-timer.
iTo cancel self-timer photography, set the self-timer setting to off c.
iAfter the self-timer picture is snapped, the self-timer is automatically reset 
to off.
When x is selected...
iWhen the shutter button is pressed, 
the self-timer indicator flashes...

English52
FOCUS RANGE
1 Set the camera to the shooting 
mode (page 26), and press the [o] 
button.
hThe screen to set the focus range 
appears.
2 Press the [n] or [o] button to select the desired focus range, and 
press the SET button.
hThe specified focus range is set, and the camera returns to the 
Shooting Screen.
HINT
iWhen the focus range is set to macro +, the zoom is set to the wide end. *: The camera automatically 
focuses on the subject within a 
range of 10 cm (3.94 in.) (Wide 
end) or 40 cm...

53English
FOCUS RANGE
How to use the manual focus
1 Set the focus range to manual - 
(page 52).
2 Press the SET button.
hThe focus distance adjustment bar 
appears.
3 Press the [l] or [m] button to adjust 
the focus distance, and press the 
SET button.
hThe focus distance is set, and you 
are returned to the Shooting 
Screen.
HINT
About the focus range
iThe focus distance indication shows the distance between the lens surface 
and the subject.
iIn some cases there may be a slight variance between the...

English54
SHOOTING
ACCESSING THE RECORDING MENU
Detailed shooting settings are accessed from the Recording Menu.
1 Set the camera to a shooting 
mode (page 27).
2 Press the MENU button.
hThe Recording Menu 
corresponding to the shooting 
mode set in step 1 appears.
hThe Recording Menu can be 
canceled by pressing the MENU 
button.
RECORDING MENU
TOUCH SENSORRESOLUTION
FOCUS METHOD
ISO
WHITE BALANCE
EXPOSURE
MENU button
Downloaded From camera-usermanual.com Sanyo Manuals