Sanyo VPC J4 User Manual
Have a look at the manual Sanyo VPC J4 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English168 Problem Cause ActionReference page ShootingThe add voice memo setting turned off.The voice memo setting automatically turns off after a voice memo is recorded.Set the add voice memo function to ON again.92 During video clip shooting, the zoom movement stops momentarily.The optical zoom has moved to the maximum magnification position.Not a malfunction. Release the zoom switch, and press it again.64 A voice memo cannot be added.The camera is set to a mode other than the still image shooting mode.Set the camera to the still image shooting mode.42 There is noise in the captured image.The ISO sensitivity setting is too high. Set the ISO sensitivity to a lower setting.84 The motion aler t icon is shown on the LCD display.The shutter speed is slow.Stabilize the camera with a tripod or the like.44 Four images were captured.The camera is set to the sequential shots shooting mode.Set the camera to the still image shooting mode.42 LCD monitorWhen capturing an image, no image is displayed on the LCD monitor.The LCD monitor has been disabled.Change the setting to enable to LCD monitor. 127 No playback image appears.The main switch is not set to [ ].Set the main switch to [].68 Downloaded From camera-usermanual.com Sanyo Manuals
169English TROUBLESHOOTING Problem Cause ActionReference page Viewing imagesThe image is too dark.The flash was blocked by a finger or other object.Hold the digital camera correctly, and make sure the flash is not obstructed.38 The subject was too far away.Capture the image in the range of operation of the flash.176 The subject was lit from behind.Capture the image using the forced flash mode.65 Use the exposure correction function.94 There is not enough light.Adjust the ISO sensitivity setting.84 The video clip picture is flickering.The video clip was filmed under fluorescent lighting.Set the flicker- reduction setting to on. 95 Downloaded From camera-usermanual.com Sanyo Manuals
English170 Problem Cause ActionReference page Viewing imagesThe image is too bright.The forced flash mode is selected.Select a different flash mode.65 The subject was too bright.Use the exposure correction function.94 The ISO sensitivity setting is incorrect.Set the ISO sensitivity to .84 The image is not in focus.The subject is too close to the digital camera.Select the correct focus setting for your needs.61, 88 The focus setting is not correct. The digital camera moved when the shutter was released.Hold the digital camera correctly and slowly press the shutter release button halfway to lock the focus. Then press the shutter release button all the way to capture the image.38, 43 The focus is not locked properly. The lens is dirty.Clean the lens. 21 Downloaded From camera-usermanual.com Sanyo Manuals
171English TROUBLESHOOTING Problem Cause ActionReference page Viewing imagesThe colors of the images captured indoors are not correct.This is due to ambient lighting.Capture the image using the forced flash mode.65 The white balance setting is incorrect.Set the white balance setting correctly. 86 A part of the image is missing.The handstrap or a finger was blocking the lens opening.Hold the digital camera correctly, and make sure the lens is not obstructed.38 “NO IMAGE” or “NO AUDIO” is shown.There is no recorded data for the selected playback mode.Playback data after capturing images or making audio recordings.— No image appears on the LCD monitor.The camera is connected to a computer or TV.No image appears on the LCD monitor while the camera is connected to a computer or TV.140, 154 During audio playback, there is no sound.The volume setting on the digital camera is too low.Select the volume icon and adjust the volume.72 No voice memo was recorded with the image.Select the add voice memo setting, and speak into the microphone.110 Downloaded From camera-usermanual.com Sanyo Manuals
English172 Problem Cause ActionReference page Connecting to a TV No image or sound.The digital camera is not correctly connected to the TV.Follow the instructions to make the connection correctly.154 The TV input is not set correctly.Set the input on the TV to “VIDEO”. The edge of the image is cut off.This is a characteristic of the TV. Not a malfunction. 154 Image editingYou cannot add a voice memo or rotate an image.The protect mode is set. Cancel the protect mode. 75 The “CANNOT RESIZE” message appears.The resolution is .Resize is not possible. Select an image with a resolution of or higher.100 Downloaded From camera-usermanual.com Sanyo Manuals
173English TROUBLESHOOTING Problem Cause ActionReference page Misc.The “NO CARD” message appears. No card is inserted.Insert a card. 32 The “PROTECTED” message appears and the data cannot be erased. Yo u h a v e attempted to erase data that is protected from accidental erasure.Set the protect setting for the data to OFF. 75 The audio guide does not sound.The operational sounds “MUTE” setting is set to “ON”. Set the “MUTE” setting to “OFF”. 118 The card installed in the camera connected to a computer cannot be read.The PC connection setting is not correct.Change the PC connection setting. 140 The camera is not functioning as a PC camera. Downloaded From camera-usermanual.com Sanyo Manuals
English174 SPECIFICATIONS Digital Camera Type CCD digital camera (recording and playback) Recording system Digital recording Image file format Still images:JPEG format (DCF, DPOF, Exif 2.2 compliant) Note:Designed mainly by the Japan Electronics and Information Technology Industries Association (JEITA), DCF (Design rules for camera file system) is standard for digital still camera image files to provide interoperability between digital photography devices for the images stored on removable memory cards. However, it is not guaranteed that all devices will support the DCF standard. Video clips: QuickTime Movie (Photo-JPEG) Audio: wav (monaural) Data storage media SD Memory Card Multi Media Card Camera effective number of pixelsApprox. 4,000,000 pixels Image sensor 1/2.7-inch CCD Virtual number of pixels: Approx. 4,230,000 pixels, interlace scan, primary color filter Recording resolution 3,264 × 2,448 pixels : (still images only) 2,880 × 2,160 pixels : (still images only) 2,288 × 1,712 pixels : (still images and sequential shots only) 1,600 × 1,400 pixels : (still images and sequential shots only) 640 × 480 pixels : (still images and sequential shots only) 640 × 480 pixels : (video clips only) 320 × 240 pixels : (video clips only) 160 × 120 pixels : (video clips only) Video clip frame rate 30 fps, 15 fps Downloaded From camera-usermanual.com Sanyo Manuals
175English SPECIFICATIONS Data compression Very low compression: (still images and sequential shots only) Low compression: Normal compression: White balance Full-auto TTL, manual setting possible Lens Prismatic optical 2.8x zoom lensf=5.7 mm to 16.0 mm (35 mm film camera conversion f=37 mm to 104 mm) Autofocus, 7 groups, 10 elements Focus modes 5-point range autofocus, spot autofocus Aperture Open F=2.8 (Wide) to 3.9 (Tele) Smallest F=6.8 (Wide) to 9.4 (Tele) Exposure control type Programmable AE Exposure correction available from the Shooting Setting Screen (0±1.8EV in 0.3EV steps) Light-measuring modes Multi-section measuring, center-weighted measuring, spot measuring Range 20 cm (7.87 in) (Wide)/30 cm (11.81 in) (Tele) to infinity (normal photography), 2 cm (0.79 in) (Wide)/30 cm (11.81 in) (Tele) to 50 cm (19.69 in) (super macro photography) Digital zoom For shooting: 1x to 4x (except resolution and Video clip shooting mode ) For playback: 1x to 51x (varies with resolution) Shutter speed Still image shooting mode: 1/2 to 1/2,000 sec. (Maximum approx. 4 seconds when scene select function set to lamp ) (During flash: 1/30 to 1/2,000 sec.) Sequential shots shooting mode: 1/2 to 1/2,000 sec. Video clip shooting mode: 1/30 to 1/10,000 sec. Downloaded From camera-usermanual.com Sanyo Manuals
English176 Sensitivity Still image shooting mode/sequential shots shooting mode: Auto (equivalent to ISO50 to 200)/equivalent to ISO50, ISO100, ISO200, and ISO400 (switchable from Shooting Setting Screen) (Maximum ISO sensitivity up to 1,600 variation: when scene select function set to lamp ) Video clip shooting mode: Auto (equivalent to ISO200 to 800)/ equivalent to ISO200, ISO400, ISO800, and ISO1,600 (switchable from Shooting Setting Screen) Viewfinder Optical direct image zoom viewfinder LCD monitor 1.8-inch TFT color liquid crystal Approx. 85,000 pixels (Frame coverage: Approx. 100% when dedicated AV connection cable is not connected) Flash working range 0.15 m to 2.5 m (0.49 to 8.20 ft.) (Wide) 0.3 m to 1.8 m (0.98 to 6.89 ft.) (Tele) Flash modes Auto-flash, forced flash, flash off, red-eye reduction Focus TTL-type AF Self-timer 2-second delay, 10-second delay (including interval shooting) Time/date Recorded with image data Ambient environmentTemperature0 to 40°C (32 to 104°F) (operation), –20 to 60°C (–4 to 140°F) (storage) Humidity 30 to 90% (operating, no condensation) 10 to 90% (storage, no condensation) Powe r supplyBattery packLithium-ion battery pack (DB-L20) × 1 AC adaptor (sold separately) Model VAR-G7EX for the VPC-J4EX, model VAR-G7E for the VPC-J4EX [for U.K.] and model VAR-G7U for the VPC-J4 Dimensions (not including protuberances, depth at narrowest dimension)101 (W) × 46 (H) × 26 (D) mm 3.98 (W) × 1.81 (H) × 1.02 (D) Weight Approx. 128 g (4.5 oz.) (without battery pack and card) Downloaded From camera-usermanual.com Sanyo Manuals
177English SPECIFICATIONS Digital camera connectors Battery life iUsing the fully charged supplied battery pack and the supplied card iApproximate time until battery pack runs out, based on test conditions at room temperature (25°C [77°F]). iThe operation time may vary depending on the conditions of the battery pack and the conditions of use. Especially when used at temperatures below 10°C (50°F), the battery pack operation time is drastically reduced. DIGITAL/AV (communication/sound and image output) terminalRegrouped jack Audio output265 mVrms (–9 dBs), 6 kΩ or less, monaural Video output1.0 Vp-p, 75 Ω unbalanced, sync negative, composite video, NTSC color TV system/PAL TV system (switchable from the Option mode Screen) USB USB 2.0 (In full speed mode: equivalent to 1.1) PC camera: USB video class DC IN (external DC power input) terminalDC 4.7 V (for exclusive use with separately sold AC adaptor [model VAR-G7EX for the VPC- J4EX, model VAR-G7E for the VPC-J4EX [for U.K.] and model VAR-G7U for the VPC-J4]) Maximum recording time 140 Images: Conforms to the CIPA standard Maximum playback time 200 Minutes:LCD monitor on, continuous play- back Downloaded From camera-usermanual.com Sanyo Manuals