Sanyo VPC J4 User Manual

							English148
4 Specify the number of prints. 
1Select “COPIES”, and press the
SET button. 
2Press the [n] or [o] arrow button to
set the number of prints.
3Press the SET button. 
h“PRINT” is selected.
5 Press the SET button. 
hPrinting begins. 
NOTE 
To cancel printing 
1During printing, press the [o] arrow button.
hThe Confirm Cancel Printing Screen appears. 
2Select “YES”, and press the SET button. 
hIf “NO” is selected, printing resumes. 
ONE IMAGE
COPIES 1
PRINT
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							149English
DIRECT-PRINT (PictBridge PRINT)
To print all the images (print all)
Print all of the images on the card. 
1 Complete the print preparations (see page 145). 
2 Select the all images print icon  ,
and press the SET button. 
hThe Print All Images Screen
appears. 
3 Select “PRINT”, and press the SET button.
hPrinting begins. 
NOTE
Printing is not possible if there are more than 1,000 still images in the
card.
iDelete unwanted images before printing. 
ALL IMAGES
PRINT
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English150
Thumbnail prints (index print)
1 Complete the print preparations (see page 145). 
2 Select the index print icon  , and
press the SET button. 
hThe Index Print Screen appears.
3 Select “PRINT”, and press the SET
button.
hPrinting begins.
INDEX
PRINT
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							151English
DIRECT-PRINT (PictBridge PRINT)
To print the images that are set to print (print reserved images)
1 Make the print settings (see page 103), and complete the print prep-
arations (see page 145).
2 Select the print reserved images
icon  , and press the SET button.
hThe Confirm Print Images Screen
appears.
3 Select “PRINT”, and press the SET button.
hPrinting begins.
hPrinting begins about 1 minute after the SET button is pressed.
HINT
iIn step 2, if you press the [l] or [m] arrow button, you can confirm the
images that are set to print.
CONFIRM IMAGES9
PRINT
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English152
To change the print settings and print images (change print settings)
Images are printed according to settings specified by the digital camera, such
as paper type, size, layout, printing quality, etc.
1 Complete the print preparations (see page 145).
2 Select the change print settings
icon  , and press the SET button.
hThe Printer Settings Screen
appears. 
MEDIA
TYPE:Specify the type of
paper used for printing.
PAPER SIZE:Specify the size of
paper used for printing.
LAYOUT:Specify how the images
are to be arranged on
the paper.
QUALITY:Select the print quality
for the images.
DATE
STAMP:Print the date the photo
was taken.
EXIT:Return to the PictBridge
Screen.PRINTER SETTINGS
PRINTER VALUEMEDIA TYPE
EXITPRINTER VALUE
PRINTER VALUE
PRINTER VALUE
PRINTER VALUEPAPER SIZE
LAYOUT
QUALITY
DATE STAMP
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							153English
DIRECT-PRINT (PictBridge PRINT)
3 Adjust the printer settings.
1Press the [n] or [o] arrow button to select the printer setting parame-
ter, and press the SET button.
hThe screen to set the selected parameter appears.
2Press the [n] or [o] arrow button to adjust the setting, and press the
SET button.
hThe selected parameter is set, and you are returned to the Printer
Settings Screen.
hFollow the same procedure to adjust the other parameters, as
desired.
hThe contents of the settings that can be made for each parameter
will differ depending on the printer.

hThe images will be printed according to the setting specified on
the printer side.
4 Select “EXIT”, and press the SET button.
hYou are returned to the PictBridge Screen.
HINT
iThe printer setting parameters will differ depending on the printer that is
connected.
iTo use printer functions which do not appear on your camera’s Printer Set-
tings Screen, select “PRINTER VALUE”.
iIf a function set by the camera is not available in the printer, the camera’s
printer setting will automatically change to “PRINTER VALUE”.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English154
CONNECTING TO A TV 
By connecting the digital camera to a television set, you can view the LCD
monitor display on the TV screen. 
Connections Connect the supplied AV cable from the DIGITAL/AV terminal on the digital
camera to the AUDIO and VIDEO input terminals on the TV. 
Playback iAfter connecting the digital camera to the television, set the TV input switch
to VIDEO input.
iWhen an AV cable is connected, no image appears on the camera’s LCD
monitor. 
iThe playback method is the same as when viewing images on the LCD
monitor.
iThe same playback procedure as when playing back with the camera is
used to play back voice memos and audio recordings as well.
iThe sound output from the digital camera is monaural. 
Voice memo playback: see page 72 
Audio playback: see page 131
CAUTION 
iDo not use excessive force when connecting and disconnecting cables.
To  t h e  
VIDEO 
input 
terminal
Yellow plug To the DIGITAL AV 
terminal
AV cable (supplied)
White 
plugTo the AUDIO
input terminal
Switch input to VIDEO
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							155English
APPENDICES 
COMMONLY ASKED QUESTIONS 
If you have a question about the camera operation, you might find the answer
in this compilation of commonly asked questions.
Question Answer Action
PowerWhy doesn’t the 
power turn on?Due to cold 
temperatures, the 
battery pack 
temporarily lost its 
power.Place the digital 
camera in your 
pocket to warm it 
up before using it.
Why is the battery 
pack consumed 
so quickly even 
after it was fully 
recharged?The ambient 
temperature is 
ver y low.Keep the battery 
pack in an 
environment of 10 
to 40°C (50 to 
104°F).
Why doesn’t 
recharging end?The battery pack 
life has expired.Replace with a 
new battery pack. 
If this is not 
effective, consult 
your dealer.
Why does the 
 icon 
appear?The remaining 
battery pack 
power is low.Use a separately 
sold AC adaptor 
(model VAR-
G7EX for the 
VPC-J4EX, model 
VAR-G7E for the 
VPC-J4EX [for 
U.K.] or model 
VAR-G7U for the 
VPC-J4), or 
replace the 
battery pack with 
a fully charged 
one.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English156
Question Answer Action
ShootingWhile the flash is 
recharging, why 
does the LCD 
monitor suddenly 
turn off?Battery pack 
power is low, 
activating the 
function that 
momentarily turns 
off the LCD 
monitor.Not a malfunction. 
When the flash is 
fully charged, the 
LCD monitor will 
turn on again.
Why isn’t the 
image captured 
when the shutter 
release button is 
pressed?The accessing 
indicator is lit 
orange (data is 
being recorded).Wait until the 
accessing 
indicator lights 
green to capture 
the image.
Why does the 
accessing 
indicator light 
orange?Recorded data is 
being saved on 
the card.Not a malfunction. 
Wait until the 
accessing 
indicator changes 
to green before 
capturing the 
image.
Why doesn’t the 
flash operate?The digital 
camera has 
determined that 
the image is bright 
enough and the 
flash is not 
necessary.Not a malfunction. 
Capture the 
image; the digital 
camera will 
determine when 
the flash is 
necessary.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							157English
COMMONLY ASKED QUESTIONS 
Question Answer Action
ShootingDuring macro 
photography, why 
is the captured 
image displaced 
from the image as 
seen through the 
viewfinder?Due to the 
displacement 
between the 
camera lens and 
the viewfinder, a 
subject viewed 
close up through 
the viewfinder will 
appear lower in 
the captured 
image.Compose the 
photo while 
viewing the LCD 
monitor.
Why can only the 
 ISO 
sensitivity setting 
be selected?The ISO 
sensitivity setting 
is fixed at   in 
the following case: 
iIn the video clip 
shooting mode, 
flicker-reduction 
 is set to on.Not a malfunction.
Are the settings 
retained even 
after the camera 
is turned off?— All settings except 
the exposure 
correction are 
retained even 
after the camera 
is turned off. Set 
the voice memo 
and self-timer 
settings each time 
you take a photo; 
however, if you 
change the 
settings but not 
take the photo, the 
settings are 
retained even 
after the camera 
is turned off.
Downloaded From camera-usermanual.com Sanyo Manuals