Sanyo VPC J4 User Manual

English118
OPERATION SOUNDS SETTING
This setting allows you to set whether or not a confirming audio signal sounds
when the operation buttons (shutter release button, SET button, MODE but-
ton, MENU button, etc.) are pressed. 
1 Display the Option Mode Screen (see page 36). 
2 Select the BEEP icon  , and
press the SET button. 
hThe Set Operation Sounds Screen
appears. 
MUTE: 
Mute or enable the operation
sounds and audio guide. 
TURN ON/OFF: 
Mute or enable the sound that is
produced when the power is...

119English
OPERATION SOUNDS SETTING
3 Press [n] or [o] on the arrow button to select the desired option, and
then press SET button. 
 
hThe screen to turn the operation sounds on or off appears. 
hPress [n] or [o] on the arrow button to select the desired setting,
and press the SET button. 
MUTE 
TURN ON/OFF 
 
hThe screen to select the operation sounds appears. 
hSelect from 9 different sounds (A to H, and  ) for the SHUTTER
sound, and from 8 different sounds (A to H) for the KEY SW sound.
hYou can...

English120
GUIDANCE FUNCTIONS
You can set whether or not the help display is shown on the LCD monitor, the
audio guide giving verbal operation instructions is enabled, and the camera
light illuminates. 
1 Display the Option Mode Screen (see page 36). 
2 Select the guidance icon  , and
press the SET button. 
hThe Set Guidance Screen appears.
3 Press the [n] or [o] arrow button to select the desired setting, and
press the SET button. 
hThe setting screen for the selected setting appears.
hPress the [n] or...

121English
LANGUAGE
You can set the LCD monitor of your digital camera to display the messages
in any of several languages. 
1 Display the Option Mode Screen (see page 36). 
2 Select the language icon  , and
press the SET button. 
hThe Language Screen appears.
3 Select the desired language, and press the SET button.
hYou are returned to the Option Mode Screen. DEUTSCH: Select for German.
ENGLISH: Select for English.
ESPAÑOL: Select for Spanish.
FRANCAIS: Select for French.
ITALIANO: Select for Italian....

English122
TV SYSTEM SETTING
This setting is to specify the type of image signal that is output from the 
camera’s DIGITAL/AV terminal. 
1 Display the Option Mode Screen (see page 36). 
2 Select the TV system icon  , and
press the SET button. 
hThe TV System Setting Screen
appears. 
3 Select the appropriate TV system, and press the SET button. 
CAUTION 
iIf the TV system setting is not correct for the connected TV, you will not be
able to view the images on the TV. 
iNo image appears on the camera’s LCD...

123English
POWER SAVE SETTING
Your camera has a “power save” function whereby the power automatically
turns off after a specified period of inactivity. The power save function works
to conserve the battery pack power when the camera is not being used, or to
prevent the battery pack from dying if the camera has accidentally been left
on. You can specify the elapsed time (standby time) before the power save
function is activated. 
1 Display the Option Mode Screen (see page 36). 
2 Select the power save...

English124
3 Press [n] or [o] on the arrow button to select the desired option. 
4 Press the SET button. 
hThe Set Standby Time Screen
appears. 
5 Press [n] or [o] on the arrow button
to set the standby time. 
6 Press the SET button. 
hThe standby time is set, and you are returned to the Power Save Set-
ting Screen.  [n]:Increases the standby time.
[o]:Decreases the standby time.
POWER SAVE
BATT/CAM
min
Downloaded From camera-usermanual.com Sanyo Manuals 

125English
FILE NO. RESET FUNCTION
If a reformatted card is used, the file name (image number) of the captured
image automatically begins from 0001. If the card is subsequently reformat-
ted, or if a different reformatted card is used, the file names again begin from
0001. This is because the file number reset function is set to ON, and conse-
quently it results in more than one card containing images with the same
numbers. By setting the file number reset function to OFF, even if the card is
reformatted...

English126
iWhen the highest image number on Card B (before replacing) is higher
than the highest image number on Card A: the file name of the next
recorded image continues from last file name recorded on Card B. 
1 Display the Option Mode Screen (see page 36). 
2 Select the file number reset icon  . 
3 Press the SET button. 
hThe File Number Reset Screen
appears. 
4 Select “OFF”, and press the SET button. 
hThe file number reset function is deactivated. 
NOTE 
iUntil the file number reset function is...

127English
SHOOTING WITHOUT THE LCD MONITOR
You can save battery power by turning off the LCD monitor when shooting.
1 Set the camera to the shooting mode, and display the Option Mode
Screen (see page 36).
2 Select the monitor ON/OFF icon
, and press the SET button.
hThe Monitor Screen appears.
ON: The LCD monitor is on.
OFF: The LCD monitor turns off.
3 Select OFF, and press the SET but-
ton.
hThe LCD monitor turns off.
hTo turn the LCD monitor back on,
press the MENU button to illumi-
nate the LCD...