Sanyo VPC J4 User Manual

English138
CHECKING THE REMAINING BATTERY PACK CHARGE
When using the battery pack, the remaining battery pack charge can be
checked on the LCD monitor. Make sure to check this indicator before captur-
ing an image. For an indication of the possible length of time for battery pack
operation, see page 177. 
1 Display a Shooting or Playback In-
formation Screen (see pages 96 and
113). 
hThe battery pack remaining charge
indicator appears in the lower right
corner of the LCD monitor. 
h and   (flashing)...

139English
CHECKING THE REMAINING BATTERY PACK CHARGE
HINT 
iIf any data is present, you can also check the remaining battery pack
charge on the Playback Information Screen. 
iUse only the supplied or separately sold battery pack in this camera. 
iBattery life may differ even among battery packs of the same type. 
iDepending on the usage of the digital camera (such as the number of
times the flash is used, the use of the LCD monitor, etc.) or the environ-
mental conditions (temperature, etc.) the number...

English140
OTHER FUNCTIONS AND CONNECTIONS
CONNECTING TO A COMPUTER
Your captured images can be copied to the hard disk of a personal computer,
or can be printed by a digital print service or with a printer. For copying to a
personal computer, please refer to the Sanyo Software Pack instruction man-
ual. For printing, use a digital print service or access a network print service.
Using the camera as your computer’s external drive
1 Set the main switch to [PC].
2 Using the supplied dedicated USB interface...

141English
CONNECTING TO A COMPUTER
3 Select the mode that corresponds to your intended use, and press
the SET button.
hPlease connect the dedicated USB interface cable to your computer’s
USB connector. Do not connect it to the USB port on your monitor or
keyboard, or to the USB hub. Be especially careful when installing the
driver software. In some instances, it may not be possible to correctly
install the driver software. 
hMore information about these operations can be found in the instruc-
tion...

English142
Data file formats
The format of the files saved on the card and the method in which the file
names are determined are explained below. 
*: Consecutive numbers assigned in the order the data was saved. Type of data Data format  File name structure
Still image/
sequential 
shots dataJPEG File name begins with SANY.
Extension is “.jpg”.
SANY****.jpg
Voice memo 
dataWAVE Same file name as corresponding still image
or sequential shots data.
Extension is “.wav”. 
SANY****.wav
Video clip...

143English
CONNECTING TO A COMPUTER
Configuration of directories for the stored data
NOTE 
Do not modify the folders and file names in the card using your com-
puter 
iIf the folders, file names, or their configuration is modified using a personal
computer, it will be impossible to play back the data using the digital cam-
era, and the digital camera may not operate properly. 
Concerning video clip data saved by the digital camera 
iYou can use QuickTime 3 or later from Apple to play back the video...

English144
Using the camera as a PC camera
By connecting your digital camera to a personal computer, you can broadcast
(photograph, use as a TV telephone, etc.) images taken with your camera
over the Internet (PC camera function). 
1 Connect the digital camera to a personal computer. 
hThe connection procedure is the same as step 2 on page 140. 
hFor the rest of the procedure, please refer to the instruction manual for
the application software you are using for the PC camera. 
CAUTION 
iThe PC camera...

145English
DIRECT-PRINT (PictBridge PRINT)
Your digital camera supports the PictBridge function. By connecting the digital
camera directly to a PictBridge-enabled printer, the digital camera’s LCD
monitor can be used to select images and initiate printing.
Print preparations
1 Install the card containing the images you want to print in the digital
camera. 
2 Use the supplied USB interface cable to connect the camera to the
printer. 
NOTE
Do not turn off the power to the printer while it is connected.
iIf...

English146
3 Turn on the power to the printer. 
4 Set the main switch to [ ].
hThe screen to confirm the con-
nection appears.
5 Select “OK” and press the SET
button.
hThe camera changes to the Pict-
Bridge printing mode, and the
Print Settings Screen appears.
CAUTION
iDuring PictBridge printing, the camera’s button operation response is
slower.
iIf the camera is powered by batteries for printing, make sure that the
remaining battery charge is sufficient (see page 136).
PRINTING MODE
ONE IMAGE
Print this...

147English
DIRECT-PRINT (PictBridge PRINT)
To select one image and print it (print select image)
Procedure to select one still image and print it.
1 Complete the print preparations (see page 145).
2 Select the choose print image icon
, and press the SET button.
hThe screen to select images for
printing appears.
3 Press the [l] or [m] arrow button to display the image you wish to
print.
ONE IMAGE
COPIES 1
PRINT
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals