Sanyo VPC J4 User Manual

English78
4 Press [n] or [o] on the arrow button
to select the desired type of erase,
and press the SET button. 
hThe Erase Confirmation Screen
appears. 
YES: Erases the selected data. 
EXIT: Does not erase the selected
data and returns to the Erase
Screen. 
5 Press [n] to select “YES”, and press the SET button. 
h“ERASING” is displayed, after which the next image appears. The
data is erased. 
hTo erase other data, select “EXIT”, press [l] or [m] to display the data
that you want to erase and repeat step...

79English
EXPERT MODE SHOOTING
ABOUT THE EXPERT MODE SHOOTING SETTING SCREENS 
Compared to the BASIC mode, the EXPERT mode allows you much more
control over the various shooting settings. 
EXPERT Mode Shooting Setting Screens 
Still Image/Sequential Shots Shooting Setting Screen* All the icons never appear at the same time. 
2
3
4
5
6
7
8
9
0
A
B
C
D
2
E
G1
F
RESOLUTION
Main switch
Downloaded From camera-usermanual.com Sanyo Manuals 

English80
1Menu mode icon (see page 36)Switch the menu mode.2Resolution menu (see page 59) 
3Focus menu (see page 61) 
4Self-timer menu (see page 57) 
5Mode menu (see page 42)
 
6Compression menu (see page 83)
7ISO sensitivity menu (see page 84) 
8White Balance menu (see page 86)
9Spot focus menu (see page 88) 
0Light-measuring mode (EXP
MEASURE) menu (see page 89) 
ADigital Zoom menu (see page 90) 
BVoice Memo menu (see page 92) 
CAssist light menu (see page 93) 
DExposure correction icon (see page...

81English
ABOUT THE EXPERT MODE SHOOTING SETTING SCREENS 
Video Clip Shooting Setting Screen * All the icons never appear at the same time. 
E
G1
F
2
3
4
5
6
7
8
9
0
A
B
C
D
RESOLUTION
Main switch
Downloaded From camera-usermanual.com Sanyo Manuals 

English82
1Menu mode icon (see page 36)
Switch the menu mode.
2
Resolution menu (see page 59)
3Frame Rate menu (see page 63) 
4 Focus menu (see page 61) 
5
Compression menu (see page 83) 
6Flicker-reduction menu (see page 95) 
7ISO sensitivity menu (see page 84) 
8White Balance menu (see page 86)
9Spot focus menu (see page 88) 
0Light-measuring mode (EXP
MEASURE) menu (see page 89) 
AOptical Zoom menu (see page 90) 
BDigital Zoom menu (see page 90) 
CAssist light menu (see page 93) 
DExposure correction...

83English
COMPRESSION RATE SETTING 
Use the procedure below to set the compression rate. Even if the same reso-
lution is used, you can change the compression setting to decrease the
image data size so that you can capture more images, or increase the image
data size for no loss in image quality. 
1 Display an EXPERT Mode Shooting Setting Screen (see page 36). 
2 Select the desired compression rate
from the compression menu, and
press the SET button. 
hThe possible compression rate
settings for each...

English84
ISO SENSITIVITY SETTING 
With the initial settings, the ISO sensitivity is automatically set according to
the brightness of the subject. However, the ISO sensitivity can be set to a
fixed setting. 
1 Display an EXPERT Mode Shooting
Setting Screen (see page 36). 
2 Select the desired ISO sensitivity
setting from the ISO sensitivity
menu. 
: Sets the ISO sensitivity automati-
cally (equivalent to ISO50 to 200
[video clip shooting mode:
ISO200 to 800]).
: Sets the sensitivity to ISO50 equivalent...

85English
ISO SENSITIVITY SETTING 
3 Press the SET button. 
hThis completes the ISO sensitivity setting. 
HINT 
iBy setting a higher ISO sensitivity, you can set higher shutter speeds and
capture images in darker locations, but noise in the captured images may
increase. 
Downloaded From camera-usermanual.com Sanyo Manuals 

English86
WHITE BALANCE SETTING 
This digital camera automatically adjusts the white balance under most 
lighting conditions. However, if you want to specify the lighting conditions or 
change the overall tone of the image, the white balance can be manually set. 
1 Display an EXPERT Mode Shooting Setting Screen (see page 36). 
2 Select the desired white balance
setting from the white balance
menu. 
: The digital camera will make the
white balance adjustment auto-
matically based on the natural
and...

87English
WHITE BALANCE SETTING 
Setting procedure 
1Select the   icon and press the SET button. 
hThe   icon moves to the left end of the line. 
2Fill the entire screen with a plain white card (or piece of paper, etc.),
and perform step 3.
3 Press the SET button. 
hThis completes the white balance setting. 
hOnce the white balance setting is programmed for the   icon, it is
retained even if another white balance setting ( ,  ,  ,  ,
or  ) is selected. If you changed to another setting, whenever you...