Sanyo VPC E60EX User Manual

145English
DIRECT PRINTING
Your camera supports the PictBridge function. By connecting the camera 
directly to a PictBridge-enabled printer, the camera’s LCD monitor can be 
used to select images and initiate printing (PictBridge printing).
Print preparations
1 Insert the card containing the images you wish to print in the 
camera.
2 Turn the printer on, and use the supplied USB interface cable to 
connect the camera to the printer.
hConnect the camera’s USB/AV terminal to the printer’s USB 
connector....

English146
3 Select “PictBridge”, and press the 
SET button.
hThe Print Settings Screen appears.
CAUTION
Caution when connecting a printer
iIf the power to the printer is turned off while it is connected, the camera 
may not operate correctly. If the camera does not operate correctly, 
disconnect the USB interface cable, turn off the camera, and then 
reconnect the cable.
iDuring PictBridge printing, the camera’s button operation response is 
slower.
iIf the camera is powered by the battery pack for...

147English
DIRECT PRINTING
To select one image and print it (one image)
Procedure to select one still image and print it.
1 Complete the printing setup (page 145).
2 Select the one image icon Y, and 
press the SET button.
hThe screen to select images for 
printing appears.
3 Toggle the SET button to the left or 
right to display the image you wish 
to print.
hSpecify the image to print.
ONE IMAGE
COPIES:
1
PRINT
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 

English148
4 Specify the number of prints.
1Select “COPIES”, and press the 
SET button.
2Toggle the SET button up or down 
to specify the number of prints.
3Press the SET button.
h“PRINT” is selected.
5 Press the SET button.
hPrinting begins.
HINT
To cancel printing
1During printing, toggle the SET button down.
hThe Confirm Cancel Printing Screen appears.
2Select “YES”, and press the SET button.
hIf “EXIT” is selected and the SET button is pressed, printing resumes.
ONE IMAGE
COPIES
1
PRINT
EXIT...

149English
DIRECT PRINTING
To print all the images (all images)
Print all of the images on the card.
1 Complete the printing setup (page 145).
2 Select the all images icon u, and 
press the SET button.
hThe Print All Images Screen 
appears.
3 Select “PRINT”, and press the SET 
button.
hPrinting begins.
CAUTION
Printing is not possible if there are more than 999 still images in the 
card.
iDelete unwanted images before printing.
PRINT
EXIT ALL IMAGES
Downloaded From camera-usermanual.com Sanyo Manuals 

English150
Thumbnail prints (index)
Make an index print of all the images on the card.
1 Complete the printing setup (page 145).
2 Select the index print icon [, and 
press the SET button.
hThe Index Print Screen appears.
3 Select “PRINT”, and press the SET 
button.
hPrinting begins.
INDEX
PRINT
EXIT
Downloaded From camera-usermanual.com Sanyo Manuals 

151English
DIRECT PRINTING
To print the images that are set to print (print reserved images)
Procedure to print all the images that are set to print.
1 Make the print settings (page 102), and complete the printing setup 
(page 145).
2 Select the DPOF icon w, and 
press the SET button.
hThe Print Scheduled Images 
Screen appears.
3 Select “PRINT”, and press the SET 
button.
hPrinting begins.
hPrinting begins about 1 minute after 
the SET button is pressed.
HINT
iIn step 2, if you toggle the SET button to...

English152
To change the printer settings and print images 
(change printer settings)
Images are printed according to settings specified by the camera, such as 
paper type, size, layout, printing quality, etc.
1 Complete the printing setup (page 145).
2 Select the printer settings icon v, 
and press the SET button.
hThe Printer Settings Screen 
appears.
MEDIA TYPE:
Specify the type of paper used for 
printing.
PA P E R  S I Z E :
Specify the size of paper used for 
printing.
LAYOUT:
Specify how the...

153English
DIRECT PRINTING
3 Adjust the printer settings.
1Toggle the SET button up or down to select a printer setting 
parameter, and press the SET button.
hThe screen to set the selected parameter appears.
2Toggle the SET button up or down to adjust the setting, and 
press the SET button.
hThe selected parameter is set, and you are returned to the Printer 
Settings Screen.
hFollow the same procedure to adjust the other parameters, as 
desired.
hThe contents of the settings that can be made for each...

English154
APPENDICES
COMMONLY ASKED QUESTIONS
If you have a question about the camera operation, you might find the answer 
in this compilation of commonly asked questions.
Question Answer Action
PowerWhy doesn’t the 
power turn on?Due to cold 
temperatures, the 
battery pack 
temporarily lost its 
power.Place the camera in 
your pocket to warm 
it up before using it.
Why is the battery 
pack consumed 
so quickly even 
after it was fully 
recharged?The ambient 
temperature is 
ver y low.Keep the battery...