Sanyo VPC E60EX User Manual

125English
HELP DISPLAY
You can set whether or not the help messages are shown on the LCD 
monitor.
1 Display the Option Screen (page 118).
2 Select the help display icon r and 
press the SET button.
hThe Help Setting Screen appears.
ON:
The HELP messages are enabled.
OFF:
The HELP messages are disabled.
3 Select the desired setting, and 
press the SET button.
hThis completes the help display 
setting.
HELP DISP
ON
OFF
Downloaded From camera-usermanual.com Sanyo Manuals 

English126
POST-VIEW SETTING
Specify the duration that the captured image appears on the LCD monitor 
(post-view) after the shutter button is pressed.
1 Display the Option Screen (page 118).
2 Select the post-view icon o, and 
press the SET button.
hThe Post-view Screen appears.
1 SEC:
The post-view image is displayed 
for 1 second.
2 SEC :
The post-view image is displayed 
for 2 seconds.
OFF:
The post-view image is not 
displayed.
3 Select the desired setting, and press the SET button.
hThis completes...

127English
ZOOM SETTINGS 
Set the optical zoom and digital zoom settings to ON or OFF. If you find the 
noise from the zoom movement during video clip recording too distracting, 
you may wish disable the optical zoom (OFF). Also, if the deterioration of 
image quality characteristic of the digital zoom function is not to your liking, 
you may choose to disable the digital zoom (OFF) and shoot using only the 
optical zoom.
1 Display the Option Screen (page 118). 
2 Select the zoom setting icon 5, 
and...

English128
4 Toggle the SET button up or down to select a setting.
5 Press the SET button.
hThe selected zoom setting is set.
HINT 
iEven when the optical zoom setting is set to OFF, the zoom can be still 
operated whenever the camera is not recording. This means that you an 
use the zoom switch to compose the picture before actually beginning 
recording. 
iThe digital zoom does not function in the following situation:
When the resolution is set to k, ,, = or -.
Downloaded From camera-usermanual.com...

129English
LCD MONITOR BRIGHTNESS
Adjust the brightness of the camera’s LCD monitor display. Use this 
adjustment when the monitor image is difficult to view because of ambient 
lighting.
1 Display the Option Screen (page 118).
2 Select the LCD brightness icon ,, 
and press the SET button.
hThe brightness control display 
appears.
3 Toggle the SET button to the left or right to set the brightness, and 
press the SET button.
hThe LCD monitor brightness is set.
HINT
iThe display in step 2 can also be...

English130
SCREEN LANGUAGE
You can set the LCD monitor of your camera to display the messages in any 
one of several languages.
1 Display the Option Screen (page 118).
2 Select the language icon z, and 
press the SET button.
hThe Language Screen appears.
DEUTSCH:German
ENGLISH:English
ESPAÑOL:Spanish
FRANCAIS:Frenc h
ITALIANO:Italian
NEDERLANDS:Dutch
:Russian
:Japanese
:Korean
:Chinese (traditional)
:Chinese (simplified)
3 Select the desired language, and press the SET button.
hThe selected display...

131English
TV SYSTEM SETTING
Specify the type of image signal that is output from your camera’s USB/AV 
terminal.
1 Display the Option Screen (page 118).
2 Select the TV system icon j, and 
press the SET button.
hThe TV System Screen appears.
NTSC:
Outputs NTSC video signals.
PA L :
Outputs PAL video signals.
3 Select the desired setting, and 
press the SET button.
hThe selected TV system is set.
HINT
If no image appears on the TV...
iIf the TV system setting is not correct for the connected equipment,...

English132
POWER SAVE FUNCTION
Your camera has a “power save” function whereby the power automatically 
turns off after a specified period of inactivity. The power save function works 
to conserve the battery pack power when the camera is not being used, or to 
prevent the battery pack from dying if the camera has accidentally been left 
on. You can specify the elapsed time (standby time) before the power save 
function is activated.
1 Display the Option Screen (page 118).
2 Select the power save icon ?,...

133English
POWER SAVE FUNCTION
3 Select the desired option, and press 
the SET button.
hThe Set Standby Time Screen 
appears.
4 Toggle the SET button up or down 
to set the standby time.
Up:
Increases the standby time.
Down:
Decreases the standby time.
5 Press the SET button.
hThe power save function is set.
BATT/CAM
POWER SAVE
1 min

Downloaded From camera-usermanual.com Sanyo Manuals 

English134
FILE No. RESET FUNCTION
If a newly formatted  (page 137) card is used, the file name (image number) 
of the captured image automatically begins from 0001. If the card is 
subsequently reformatted, or if a different reformatted card is used, the file 
names again begin from 0001. This is because the file number reset function 
is set to “ON”, and consequently it results in more than one card containing 
images with the same numbers. By setting the file number reset function to 
“OFF”, even if...